[1]王威,高敬宇,苏三庆,等.波形钢板剪力墙抗侧性能的有限元分析[J].西安建筑科技大学学报(自然科学版),2017,49(05):630-0636.[doi:10.15986/j.1006-7930.2017.05.003]
 WANG Wei,GAO Jingyu,SU Sanqing,et al. Lateral resisting behavior finite element analysis of corrugated steel plate shear wall [J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2017,49(05):630-0636.[doi:10.15986/j.1006-7930.2017.05.003]
点击复制

波形钢板剪力墙抗侧性能的有限元分析()
分享到:

西安建筑科技大学学报(自然科学版)[ISSN:1006-7930/CN:61-1295/TU]

卷:
49
期数:
2017年05期
页码:
630-0636
栏目:
出版日期:
2017-10-28

文章信息/Info

Title:
Lateral resisting behavior finite element analysis of corrugated steel plate shear wall

文章编号:
1006-7930(2017)05-0630-07
作者:
王威1高敬宇2苏三庆1李元刚1张龙旭1李艳超1
(西安建筑科技大学 土木工程学院,陕西 西安 710055)
Author(s):
WANG Wei1 GAO Jingyu2 SU Sanqing1 LI Yuangang1 ZHANG Longxu1 LI Yanchao1
(1.School of Civil Engineering, Xi’an Univ. of Arch. & Tech., Xi’an 710055, China 2. Shandong Tong Yuan Design Group CO.LTDJi’nan 250101, China)
关键词:
波形钢板剪力墙抗侧性能钢板厚度高宽比波角
Keywords:
corrugated steel plate shear wall lateral resisting behavior steel plate thickness height to width aspect ratio wave angle
分类号:
TU391
DOI:
10.15986/j.1006-7930.2017.05.003
文献标志码:
A
摘要:
摘要:为研究波形钢板剪力墙的抗侧力性能及验证钢板弹塑性本构模型和壳单元在钢板剪力墙有限元分析中的适用性,本文以平钢板剪力墙、水平和竖向放置的波形钢板剪力墙试验为基础,采用ABAQUS有限元分析软件建立了19个平钢板和波形钢板剪力墙模型,通过与试验数据对比验证了有限元分析模型的精度和可靠性,并进一步分析了钢板厚度、剪力墙高宽比和波形钢板波角等因素对其抗侧力性能的影响研究结果表明:随内嵌波纹钢板厚度增加、剪力墙高宽比的减小,波形钢板剪力墙的抗侧力性能增强,且波角为30°和45°时,受力性能最佳.
Abstract:
In order to research the lateral resisting behavior of corrugated SPSW, and verifying the steel plate elastic-plastic constitutive model and the applicability of the shell element in finite element analysis of SPSW, based on a test of shear wall with flat plate, horizontal and vertical positioned corrugated steel plate, 19 flat steel plate and corrugated steel plate shear wall ABAQUS models were built here. Validate the accuracy and reliability of the finite element analysis model by comparing with the experimental results, the influence of steel plate thickness, height to width aspect ratio of steel plate shear wall (SPSW) and corrugated steel plate wave angle to the lateral load-resisting performance of corrugated SPSW were further analyzed and discussed. The study results show that with the increasing of steel plate thickness, decreasing of aspect ratio, the lateral load resisting of corrugated SPSW are becoming stronger, and the best wave angle of the corrugated steel plate are 30° and 45°

参考文献/References:

[1]. References,李国强,孙飞飞.波纹腹板钢梁受弯稳定性研究[J].工程力学,2011,28(8):77-82.
[2].ZHANG Zhe, LI Guoqiang, SUN Feifei. Research on flexural stability of the H-beams with corrugated webs[J]. Engineering Mechanics. 2011,28(8):77-82.
[3].李国强,范昕,孙飞飞,等 波纹腹板H型钢梁柱铰接节点静力性能试验研究及有限元分析[J]. 建筑结构学报, 2013, 34(4): 107-114.
[4].LI Guoqiang, FAN Xin, SUN Feifei,et al. Investigation of static behavior of pinned connections of H-beams with corrugated webs[J]. Journal of Building Structures, 2013, 34(4):107-114.
[5].Hassanein M F, Kharoob O F. Shear buckling behavior of tapered bridge girders with steel corrugated webs[J]. Engineering Structures, 2014(74):157-169.
[6].Hassanein M F, Kharoob O F.Linearly tapered bridge girder panels with steel corrugated webs near intermediate supports of continuous bridges[J]. Thin-Walled Structures, 2015 (88):119-128.
[7].Fereshteh Emami, Massood Mofid, Abolhassan Vafai. Experimental study on cyclic behavior of trapezoidally corrugated steel shear walls[J]. Engineering Structures, 2013, 48: 750-762.
[8].郭彦林, 王小安, 张博浩,等. 波浪腹板钢结构设计理论研究及应用现状[J]. 工业建筑, 2012, 42(7):1-13. Guo Yanlin Wang Xiaoan, Zhang Bohao, et al. Research and application of wave plate web steel structure design theory [J]. Industrial Building, 2012, 42 (7): 1-13.
[9].王萌,石永久,王元清. 考虑累积损伤退化的钢材等效本构模型研究[J]. 建筑结构学报, 2013, 34(10):73-83.
[10].WANG Meng,SHI Yongjiu,WANG Yuanqing. Study on equivalent constitutive model of steel with cumulative degradation and damage[J]. Journal of Building Structures, 2013, 34(10):73-83.
[11].Y J Shi, M Wang, Y Q Wang. Extremely low cycle fatigue experimental and constitutive model study of structural steel under cyclic loading[J]. Journal of Constructional Steel Research, 2011, 67(8):1185-1197.
[12].G Shi, M Wang, Y Bai, et al. Experimental and modeling study of high-strength structural steel under cyclic loading[J].Engineering Structures,2012,37:1-13.
[13].Jae-Yuel Oh, Deuck Hang Lee, Kang Su Kim. Accordion effect of prestressed steel beams with corrugated webs[J]. Thin-Walled Structures, 2012(57): 49-61.
[14].王威,王伟涛,苏三庆,等. 拉结筋对内配钢板混凝土剪力墙组合作用影响的有限元模型分析[J]. 西安建筑科技大学学报:自然科学版, 2015,47(1):26-32.
[15].WANG Wei, WANG Weitao, SU Sanqing, et al. Effect of tie rods on composite action analyzing for R.C. shear wall in-filled with steel plate by the finite element models[J]. J. of Xi’an Univ. of Arch. & Tech.:( Natural Science Edition ), 2015, 47(1): 26-32.
[16].王威,杨腾,苏三庆,等.带栓钉的内置钢板混凝土组合剪力墙抗剪性能研究[J].西安建筑科技大学学报:自然科学版,2014,46(1):27-33.
[17].WANG Wei, YANG Teng, SU Sanqing, et al. Research of shear capacity performances of embedded steel plate concrete shear walls with studs[J]. J. of Xi’an Univ. of Arch. & Tech.: Natural Science Edition,2014,46(1):27-33.
[18].收稿日期:201-01-03,修改稿日期:
[19].基金项目:国家自然科学基金项目(5147838351578449),陕西省自然科学基金项目(2015JM5192)
[20].作者简介:王威(1972),男,教授,主要研究钢与混凝土组合结构结构安全诊断E-mail:wangwgh1972@163.com
[21].第3期 王威,等:波形钢板剪力墙抗侧性能的有限元分析

备注/Memo

备注/Memo:
收稿日期:201-01-03,修改稿日期:2017-08-18
基金项目:国家自然科学基金项目(5147838351578449),陕西省自然科学基金项目(2015JM5192)
作者简介:王威(1972),男,教授,主要研究钢与混凝土组合结构结构安全诊断E-mail:wangwgh1972@163.com
更新日期/Last Update: 2017-11-09