[1]高春彦,杨卫平,李斌.圆钢管混凝土K型焊接相贯节点力学性能数值模拟[J].西安建筑科技大学学报(自然科学版),2018,50(01):18-22.[doi:10.15986/j.1006-7930.2018.01.004]
　GAO Chunyan,YANG Weiping,LI Bin.Numerical simulation on the mechanical behavior of the concrete-filled circular steel tubular welded K-joints[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2018,50(01):18-22.[doi:10.15986/j.1006-7930.2018.01.004]
点击复制

圆钢管混凝土K型焊接相贯节点力学性能数值模拟()
分享到：

西安建筑科技大学学报（自然科学版）[ISSN:1006-7930/CN:61-1295/TU]

卷:
50
期数:
2018年01期
页码:
18-22
栏目:
出版日期:
2018-03-15

文章信息/Info

Title:
Numerical simulation on the mechanical behavior of the concrete-filled circular steel tubular welded K-joints
文章编号:
1006-7930(2018)01-0018-05
作者:
高春彦1; 2; 杨卫平1; 李斌1
(1.内蒙古科技大学 土木工程学院,内蒙古 包头 014010; 2. 南京航空航天大学 航空宇航学院,江苏 南京210016)
Author(s):
GAO Chunyan1; 2;  YANG Weiping1;  LI Bin1
(1. School of Civil Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, China 2.College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China)
关键词:
圆钢管混凝土; 节点; 破坏模式; 承载力; 承载效率
Keywords:
concrete-filled circular steel tube;  joint;  failure mode;  bearing capacity;  carrying efficiency
分类号:
TU398
DOI:
10.15986/j.1006-7930.2018.01.004
文献标志码:
A
摘要:
以圆钢管混凝土K型焊接相贯节点的试验研究为基础，利用试验的相关参数，对该种节点进行了非线性有限元参数分析，以研究这种节点的破坏模式及其应力分布规律.分析中考察了弦杆径厚比γ、腹杆与弦杆管径比β和壁厚比τ等参数对节点承载力、破坏模式以及承载效率的影响规律.分析结果表明：圆钢管混凝土K型焊接相贯节点的承载力、承载效率和破坏模式三者相互关联.当节点发生腹杆失效破坏时，β和τ值对节点极限承载力的影响较大，而γ值的影响很小；在此破坏模式下，节点的承载效率均接近于1.当节点发生冲剪开裂破坏时，γ和β值对节点极限承载力的影响较大，而τ值的影响很小.然而，在此破坏模式下，τ值对节点承载效率的影响较大.另外，对圆钢管混凝土K型焊接相贯节点的承载力计算方法进行了探讨，本文研究成果可为工程实践提供理论依据
Abstract:
Based on the experimental study of concrete-filled circular steel tubular (CFCST) welded K-joints, the finite element analyses were carried out using related test parameters to reveal the failure modes and stress distribution laws of this kind of joint. The effects of the chord member diameter-thickness γ, the diameter ratio β and thickness ratio τ between the chord member and the web member on the ultimate bearing capacities, failure modes and load-carrying efficiencies were studied. Results indicate that the bearing capacity, carrying efficiency and the failure mode are correlated for this welded CFCST K-joints. When the web member fails, the β and τ have large effect on the bearing capacities compared with the γ. Under this condition the load-carrying efficiencies of joints are all close to 1. When the joint fails because of the chord member punching shear, the β and γ have larger effect on the bearing capacities compared with the τ. However under such condition, the τ has largest influence on the carrying efficiencies. Finally the bearing capacity calculation method of the CFCST welded K-joint was studied and the results can provide theoretical basis for engineering practice.

参考文献/References:

[1]TEBBET I, BECKETT C, BILLINGTON C. The punching shear strength of tubular joints reinforced wit a grouted pile [C]//Proceedings of offshore Technology Conference, offshore technology conference association, Houston, Texas, 1979:915-921.

[2]SAKAI Y, HOSAKA T, ISOE A, et al. Experiments on concrete filled and reinforced tubular K-joints of truss girder[J]. Journal of Constructional Steel Research, 2004, 60:683-699.

[3]陈宝春,黄文金.钢管混凝土K型相贯节点极限承载力试验研究[J].土木工程学报. 2009,42(12):91-98.

CHEN Baochun, HUANG Wenjin. Experimental study on ultimate bearing capacity of CFST directly-welded K-joints[J].China Civil Engineering Journal, 2009,42(12):91-98.

[4]叶尹.大跨越钢管塔采用复合构件时的节点试验研究[J]．电力建设.2007,28(12):39~42.

YE Yin. Experimental study on nodes of large span steel tube tower using composite components[J]. Electric Power Construction. 2007, 28(12):39-42.

[5]宋谦益.圆钢管混凝土-钢管 K 形节点的力学性能研究[D].北京:清华大学,2010.

SONG Qianyi. Behavior of circular concrete filled steel tube to steel tube K-joints [D]. Beijing: Tsinghua University, 2010.

[6]李斌,乔明,高春彦. 钢管混凝土格构式风电机塔架节点静力性能试验研究[J].建筑结构,2013,43(5):35-38.

LI Bin, QIAO Ming, GAO Chunyan. Static behavior study on latticed concrete-filled steel tubular wind turbine tower joints[J]. Building Structure, 2013,43(5):35-38.

[7]高春彦,杨卫平,李斌,等. 风力发电机塔架K型相贯节点静力性能试验研究[J].西安建筑科技大学学报（自然科学版），2014,46(5):671-675.

GAO Chunyan, YANG Weiping, LI Bin, et al. Experiment study on the static behavior of the welded tubular K-joints in wind turbine tower[J]. J. Xi′an Univ. of Arch. & Tech.(Natural Science Edition)，2014,46(5): 671-675.

[8]WARDENIER J, KUROBANE Y, PACKER J A, et al. Design guide for circular hollow section(CHS) joints under predominantly static loading [M]. 2nd ed. Altendorf, Switzerland:CIDECT, 2008.

[9]王新毅. 圆钢管-圆钢管混凝土焊接节点抗弯刚度和极限承载力研究[D].上海:同济大学,2009.

WANG Xinyi. Research on the flexural stiffness and ultimate bearing capacity for the concrete-filled circle hollow section joint [D].Shanghai: Tongji University, 2009.

[10]韩林海. 钢管混凝土结构理论与实践[M].北京：科学出版社,2007.

HAN Linhai. Theory and practice for concrete-filled steel tubular structure[M].Beijing: Science Press,2007.

[11]李茂华,邢海军,胡晓光,等. 输电线路钢管塔小角度K形节点承载力研究[J].建筑结构.2013,43(5):48-53.

LI Maohua, XING Haijun, HU Xiaoguang, et al. Research on load-carrying capacity of smaller angle K-joints for power transmission steel tubular tower[J].Building Structure. 2013,43(5):48-53.

[12]陈娟. 圆钢管混凝土T型相贯节点动力性能试验和理论研究[D].抗州：浙江大学,2011. 


CHEN Juan. Experimental and theoretical study of dynamic performance of concrete-filled steel tubular T-joints[D]. Hangzhou: Zhejiang University， 2011.

相似文献/References:

[1]赵鸿铁,武启明,薛建阳,等.型钢混凝土异形柱框架角节点的承载力及其有限元分析[J].西安建筑科技大学学报(自然科学版),2011,43(01):1.[doi:DOI:10.15986/j.1006-7930.2011.01.016]
　ZHAO Hong-tie,WU Qi-ming,XUE Jian-yang,et al.ZHAO Hong-tie , WU Qi-ming , XUE Jian-yang , LIU Yi[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2011,43(01):1.[doi:DOI:10.15986/j.1006-7930.2011.01.016]

备注/Memo

备注/Memo:
收稿日期:2017-03-23修改稿日期:2018-01-19

基金项目:国家自然科学基金项目(11172131)

第一作者:高春彦(1978-)，女，博士生，副教授，从事组合结构和结构抗震性能研究.E-mail: gao-197844@163.com
更新日期/Last Update: 2018-03-15