[1]苏明周,金峰华,王 喆.竖向荷载下套管节点装配式交错桁架受力性能研究[J].西安建筑科技大学学报：自然版,2015,47(06):781-787.[doi:10.15986/j.1006-7930.2015.06. 003]
　SU Mingzhou,JIN Fenghua,WANG Zhe.Study on the mechanical behavior of assembly steel staggered truss structures with sleeve tube joint under vertical load[J].J.Xi’an Univ. of Arch. & Tech.：Natural Science Edition,2015,47(06):781-787.[doi:10.15986/j.1006-7930.2015.06. 003]
点击复制

竖向荷载下套管节点装配式交错桁架受力性能研究()
分享到：

西安建筑科技大学学报：自然版[ISSN:1006-7930/CN:61-1295/TU]

卷:
47
期数:
2015年06期
页码:
781-787
栏目:
出版日期:
2016-01-15

文章信息/Info

Title:
Study on the mechanical behavior of assembly steel staggered truss structures with sleeve tube joint under vertical load
文章编号:
1006-7930(2015)06-0781-07
作者:
苏明周1; 金峰华1; 王 喆2
(1. 西安建筑科技大学土木工程学院,陕西 西安 710055 ; 2. 中国建筑标准设计研究院有限公司, 北京 10048 )
Author(s):
SU Mingzhou1;  JIN Fenghua1;  WANG Zhe2
(1. School of Civil Engineering, Xian Univ. of Arch. & Tech., Xian 710055, China; 2. China Institute of Building Standard Design & Research Co. Ltd., Beijing 10048, China)
关键词:
装配式交错桁架体系; 套管节点; 承载能力; 非线性有限元分析; 受力性能
Keywords:
Assembly steel staggered truss system;  sleeve tube joint;  bearing capacity;  nonlinear finite element analysis;  mechanical behavior
分类号:
TU312.1 TU317.1
DOI:
10.15986/j.1006-7930.2015.06. 003
文献标志码:
A
摘要:
为研究竖向荷载下桁架与方钢管混凝土柱套管节点装配式交错桁架的受力性能，按实际受力和等强原则设计了2种不同套管节点形式的1/2比例缩尺交错桁架模型试件，并对其进行了竖向静力加载试验研究，得到了试件的破坏形态、承载力、刚度以及应变分布规律．采用ABAQUS建立了试验试件的有限元模型，以轴压比和混凝土强度为参数，研究了其对交错桁架承载力的影响．结果表明：与按实际受力设计节点的交错桁架结构相比，按等强设计节点的刚度和承载能力都较大，节点宜按等强设计；减小轴压比或提高混凝土强度均会提高结构竖向极限承载力，但差别不大．
Abstract:
In order to study the mechanical behavior of assembly steel staggered truss structures with sleeve tube joint of truss to concrete filled tube column under vertical load, two half scaled specimens were designed, one by the actual internal force, and the other by the full strength. Experiments were conducted to research the failure mode, load bearing capacity, stiffness and strain distribution of the specimens. The finite element models of test specimens were established by using finite element software ABAQUS, and nonlinear analysis were considered to study the influence of compression ratio of column and the concrete strength in the steel tube to the bearing capacity. Results revealed that the joint designed by full strength had larger elastic stiffness and higher bearing capacity than that designed by actual load, so the joint designed in terms of full strength is recommended. Decreasing the compression ratio of column or increasing the concrete strength in the steel tube can slightly improve the load bearing capacity of the structure

参考文献/References:

References

[1] BAKKE H P, KLOIBER L A, NUNH A C. Staggered truss building system[J]. Civil Engineering, 1969, 39(11): 56-59.

[2] HASSLER A E. Erecting the staggered truss system: A view from the field[J]. Engineering Journal, AISC, 1986, 23(4): 166-172.

[3] GUPTA R P, GOELS C. Dynamic analysis of staggered truss framing system [J]. Journal of the Structural Division, 1972, 98(7): 1475-1492.

[4] GOEL S C, ITANI A M. Seismic behavior of open-web truss-moment frames[J]. Journal of Structural Engineering, 1994, 120(6): 1763-1780.

[5] 潘英, 周绪红. 交错桁架体系的抗震性能动力分析[J].土木工程学报, 2002, 35(4): 12-16.

PAN Ying, ZHOU Xuhong. Aseismic behavior of the staggered-truss system[J]. China Civil Engineering Journal, 2002, 35(4): 12-16.

[6] 周绪红, 莫涛, 刘永健, 等. 高层钢结构交错桁架结构的试验研究[J]. 建筑结构学报, 2006, 27(5): 86-92.

ZHOU Xuhong, MO Tao LIU Yongjian, et al. Experimental study on high-rise staggered truss steel structure[ J]. Journal of Building Structures, 2006, 27(5): 86-92.

[7] 冉红东. 钢交错桁架结构体系在循环荷载作用下的破坏机理及抗震设计对策[D]. 西安: 西安建筑科技大学,2008.

RAN Hongdong. Collapse Mechanism and design criterion of steel staggered truss system under cyclic load[D]. Xi′an: Xi′an Univ. of Arch. & Tech., 2008.

[8] 赵宝成, 计明明, 顾强, 等. 被动消能交错桁架滞回性能试验[J]. 沈阳建筑大学学报(自然科学版), 2013,29(1): 7-15.

ZHAO Baocheng, JI Mingming, GU Qiang, et al. Experimental investigation of hysteretic behavior of passive energy dissipation staggered truss[J]. Journal of Shenyang Jianzhu University (Natural Science ) , 2013, 29(1): 7-15.

[9] WEXLER N, LIN F B. Staggered Truss Framing Systems, Steel Design Guide Series 14[M]. AISC, New York, 2002.

备注/Memo

备注/Memo:
收稿日期：2015-07-13 修改稿日期：2015-12-04
基金项目：“十二五”科技支撑计划课题基金资助项目(2013BAJ10B03-0)
作者简介：苏明周(1971-)，男，教授，博士，博导，主要从事钢结构稳定与钢结构抗震、新型钢结构体系受力性能和设计理论研究．E-mail：sumingzhou@163.com
更新日期/Last Update: 2016-01-29