[1]梁兴文,王照耀,于 婧,等.钢筋混凝土剪力墙结构多塑性铰区合理布置研究[J].西安建筑科技大学学报(自然科学版),2018,50(02):169-0175.[doi:10.15986/j.1006-7930.2018.02.003]
 LIANG Xingwen,WANG Zhaoyao,YU Jing,et al.Research on reasonable arrangement of multi-plastic hinge region in[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2018,50(02):169-0175.[doi:10.15986/j.1006-7930.2018.02.003]
点击复制

钢筋混凝土剪力墙结构多塑性铰区合理布置研究()
分享到:

西安建筑科技大学学报(自然科学版)[ISSN:1006-7930/CN:61-1295/TU]

卷:
50
期数:
2018年02期
页码:
169-0175
栏目:
出版日期:
2018-05-28

文章信息/Info

Title:
Research on reasonable arrangement of multi-plastic hinge region in
文章编号:
1006-7930(2018)02-0169-07
作者:
梁兴文1王照耀1于 婧1吴继伟2
(1.西安建筑科技大学 土木工程学院,陕西 西安 710055;2.台州职业技术学院 建筑工程学院,浙江 台州 31800)
Author(s):
LIANG Xingwen1 WANG Zhaoyao1 YU Jing1 WU Jiwei2
(1School of Civil Engineering, Xi′an Univ of Arch & Tech, Xi′an 710055, China;
2Taizhou Vocational and Technical College,Institute of Building Engineering,Zhejiang Taizhou 318000,China)

关键词:
剪力墙结构塑性铰抗震设计高阶振型效应时程分析
Keywords:
shear wall structure plastic hinge seismic design higher mode effects time history analysis
分类号:
TU375
DOI:
10.15986/j.1006-7930.2018.02.003
文献标志码:
A
摘要:
基于Panagiotou等提出的双塑性铰区设计概念,分别对6种不同塑性铰区数量和布置位置的模型进行非线性时程分析,对比罕遇地震作用下不同模型的受力情况。结果表明:塑性铰区数量超过3个时,结构的地震内力基本保持不变;当塑性铰区数量确定时,均匀布置使结构受高阶振型影响最小;沿高度方向均匀布置3个
Abstract:
The design concept of multi-plastic hinge region provides a new seismic idea of shear wall structure in high seismic areas. In order to achieve the balance of economy and security, it is necessary to determine the reasonable arrangement of multi-plastic hinge region. Based on the concept of dual-plastic hinge design put forward by Panagiotou et al.,the nonlinear time history analysis was carried out on 6 multi-plastic hinge region models of different quantity and arrangement respectively, comparing the seismic demand of different models. The results showed that when the number of plastic hinge region exceeds three, the seismic demands of the structure almost remain unchanged. When the number of plastic hinge region remained the same, the plastic hinge region located in different position had different influence of seismic internal force. When the plastic hinge region were uniform arranged, it is the most effective for reduction of the effect of higher modes. Arranging three plastic hinge region evenly along the height direction will significantly reduce the seismic demands of the structure under rare earthquakes, enhance the seismic performance of the structure, and produce good economic benefits

参考文献/References:

参考文献References
[1]中华人民共和国住房和城乡建设部建筑抗震设计规范:GB 50011-2010[S]北京:中国建筑工业出版社,2010.
Ministry of Housing and UrbanRural Development of People′s Republic of China. Code for seismic design of building: GB 50011-2010[S] Beijing: China Architecture & Building Press,2010.
[2]中华人民共和国住房和城乡建设部 混凝土结构设计规范:GB 50010-2010 [S] 北京:中国建筑工业出版社,2010
Ministry of Housing and UrbanRural Development of People′s Republic of China. Code for design of concrete structures:GB50010-2010[S] Beijing: China Architecture & Building Press,2010.
[3]中华人民共和国住房和城乡建设部高层建筑混凝土结构技术规程:JGJ 3-2010[S]北京:中国建筑工业出版社,2010
Ministry of Housing and UrbanRural Development of People′s Republic of China. Technical specification for concrete structures of tall building: JGJ 3-2010[S] Beijing: China Architecture & Building Press,2010
[4]KHEYRODDIN A, NADERPOUR H Nonlinear finite element analysis of composite RC shear walls[J]. Iranian Journal of Science and Technology, Transaction B Engineering,2008, 32(2): 79-89.
[5]ESMAILI O, EPACKACHI S, MIRGHADERI R, et al Rehabilitation of a highrise coupled shear wall system in a 56storey residential reinforced concrete building(Tehran Tower), based on nonlinear dynamic timehistory analyses[J] Structural Design of Tall and Special Buildings,2011, 20(8): 1035-1047.
[6]KLEMENCIC R,FRY J A,HOOPER J D,et al Performance based design of ductile concrete core wall buildings issues to consider before detailed analysis[J].Structural Design of Tall and Special Buildings,2007,16(5) : 599–614.
[7]MUNIR A, WARNITCHAI P The cause of unproportionately large higher mode contributions in the inelastic seismic responses of highrise corewall buildings[J] Earthquake Engineering & Structural Dynamics,2012, 41(15): 2195-2214.
[8]HIEU Lu, IMAN Ghorbanirenani, PIERRE Léger, et al Numerical modeling of slender reinforced concrete shear wall shaking table tests under highfrequency ground motions [J] Journal of Earthquake Engineering, 2013, 17(4):517-542.
[9]Ghorbanirenani I, Tremblay R, Léger P, et al Shake table testing of slender RC shear walls subjected to eastern North America seismic ground motions[J] Journal of Structural Engineering,2011,138(12): 1515-1529.
[10]ZEKIOGLU A, WILLFORD M, JIN L, et al Case study using the Los Angeles tall buildings structural design council guidelines: 40storey concrete core wall building[J] The Structural Design of Tall and Special Buildings, 2007, 16(5): 583-597.
[11]PANAGIOTOU M, RESTREPO J Dualplastic hinge design concept for reducing highermode effects on highrise cantilever wall buildings[J] Earthquake Engineering & Structural Dynamics, 2009, 38(12):1359-1380.
[12]Berkeley C A. PERFORM3D User guide[M]//Nonlinear analysis and performance assessment for 3D structures. Version 4. UC Berkeley:Computers and Structures, Inc 2006.
[13]GRANGE S, KOTRONIS P, MAZARS J Numerical modelling of the seismic behaviour of a 7story building: NEES benchmark[J] Materials and Structures, 2009, 42(10): 1433-1442.
[14]SCHOTANUS M I J, MAFFEI J R Computer modeling and effective stiffness of concrete wall buildings[C]//Proceedings of the International FIB Symposium on Tailor Made Concrete Structures, Berlin:Research Gafe 2008,939-945

备注/Memo

备注/Memo:
收稿日期:2017-02-21 :2018-3-26
基金项目:国家自然科学基金资助项目(50578016)
第一作者:梁兴文(192-),男,硕士,教授,主要从事建筑结构及抗震研究E-mail: liangxingwen2000@163.com
更新日期/Last Update: 2018-05-28