[1]王 朋,于 彬,史庆轩,等.钢筋混凝土板柱节点冲切破坏模型及承载力分析[J].西安建筑科技大学学报(自然科学版),2020,52(06):852-859.[doi:10.15986/j.1006-7930.2020.06.011 ]
　WANG Peng,YU Bin,SHI Qingxuan,et al.Punching failure models and bearing capacity analysis of reinforced concrete slab-column connections[J].J. Xi'an Univ. of Arch. & Tech.(Natural Science Edition),2020,52(06):852-859.[doi:10.15986/j.1006-7930.2020.06.011 ]
点击复制

钢筋混凝土板柱节点冲切破坏模型及承载力分析()
分享到：

西安建筑科技大学学报（自然科学版）[ISSN:1006-7930/CN:61-1295/TU]

卷:
52
期数:
2020年06期
页码:
852-859
栏目:
出版日期:
2020-12-20

文章信息/Info

Title:
Punching failure models and bearing capacity analysis of reinforced concrete slab-column connections
文章编号:
1006-7930(2020)06-0852-08
作者:
王 朋1; 2; 3; 于 彬2; 史庆轩1; 2; 3; 张 鹏2
(1.西安建筑科技大学 西部绿色建筑国家重点实验室,陕西 西安 710055; 2.西安建筑科技大学 土木工程学院,陕西 西安 710055; 3.西安建筑科技大学 结构工程与抗震教育部重点实验室,陕西 西安 710055)
Author(s):
WANG Peng1; 2; 3;  YU Bin2;  SHI Qingxuan1; 2; 3;  ZHANG Peng2
(1.State Key Laboratory of Green Building in Western China, Xi'an Univ. of Arch. & Tech.,Xi'an 710055,China; 2.School of Civil Engineering, Xi'an Univ. of Arch. & Tech., Xi'an 710055,China; 3.Key Lab of Structural Engineering and Earthquake Resistance, Ministry of Education,Xi'an Univ. of Arch. & Arch.,Xi'an 710055,China)
关键词:
钢筋混凝土;  板柱节点;  破坏模型;  冲切承载力
Keywords:
reinforced concrete;  slab-column connections;  failure models;  punching shear capacity
分类号:
TU398+.1
DOI:
10.15986/j.1006-7930.2020.06.011
文献标志码:
A
摘要:
板柱结构是建筑结构中常用的结构形式之一,它具有结构体系简单、传力途径明确等一系列优点,但根据工程应用发现板柱结构的节点处容易发生脆性特性显著的冲切破坏.近百年来,国内外学者对板柱节点冲切破坏机理进行了大量研究,以期发现其破坏机理和破坏准则,目前学者们提出了多个冲切破坏模型.本文选取了较具有代表性的七种冲切破坏模型,对比分析各模型的传力机制及破坏准则; 同时,筛选国内外已完成的202个钢筋混凝土板柱节点冲切破坏试验数据,采用前述七种冲切破坏模型承载力公式计算冲切承载力,并对计算结果进行统计分析.结果表明:目前现有的破坏模型对板柱节点的冲切破坏机理和破坏准则并未形成统一认识,各模型冲切承载力计算公式所采用的影响因素以及影响因素在计算中的贡献程度有较大差异. 计算结果还表明冲切承载力与(f'c)1/3、ρ1/2有较好的吻合关系,而我国规范中计算公式并未考虑纵向钢筋配筋率的影响,混凝土强度的贡献也不同,这一发现可为进一步完善规范做出参考.
Abstract:
The slab-column structure is one of the commonly used structural styles in the construction structure, which has a series of advantages such as simple structure system, simple and clear transmission way, etc. However, according to the engineering application, it is found that the connections of slab-column structure are prone to punching failure. In the past 100 years, scholars all over the world have been studying the punching failure mechanism of slab-column connections in order to find out its failure mechanism and failure criterion. At present, scholars have proposed several failure models. In this paper, seven typical punching failure models are selected to compare and analyze the force transfer mechanism and failure criteria of each model. At the same time, the test data of punching failure of 202 reinforced concrete slab-column connections were screened, the punching shear capacity was calculated by using the aforementioned seven punching failure model formulas, and the calculated results were statistically analyzed. The results show that the existing failure models have not formed a unified understanding of the failure mechanism and failure criteria of the slab-column connections, and the influencing factors used in the calculation formula of the punching shear capacity of each model and the contribution degree of the influencing factors in the calculation are quite different. The results also showed that the punching shear capacity was in good agreement with (f'c)1/3 and ρ1/2. However, The calculation formula does not take into account the influence of longitudinal reinforcement ratio and the contribution of concrete strength is different in Chinese codes. This finding may be a reference for further improvement of the codes.

参考文献/References:

[1]KINNUNEN S, NYLANDER H. Punching of concrete slabs without shear reinforcement[M]. Elander, Tr-ansactions of the Royal Institute of Technology Stoc-kholm, 1960:79-84.
[2]BRSTRUP M W, NIELSEN M P, JENSEN B C, et al. Axisymmetric punching of plain and reinforced concrete[M].Structural Research Laboratory, Technical University of Denmark, 1976: 1-33.
[3]ALEXANDER S D B, SIMMONDS S H. Ultimate strength of slab-column connections[J]. ACI Structural Journal, 1987, 84(3): 255-261.
[4]KOTSOVOS G M, KOTSOVOS M D. Flat Slab wi-thout shear reinforcement: Criteria for punching shear[J]. Structural Engineer, 2009, 87(23/24):31-33.
[5]SHEHATA I A. Rational method for designing RC slabs to resist punching[J]. Journal of Structural Eng-ineering, 1990,116(7): 2055-2057.
[6]JIANG D H, SHEN J H. Strength of concrete slabs in punching shear[J].Journal of Structural Engineering, 1986, 112(12): 2578-2791.
[7]严宗达. 用双剪强度理论解混凝土板冲切的轴对称问题[J]. 工程力学, 1996, 13(1): 1-7.
YAN Zongda. Solution of the axisymmetrical punching problem of concrete slab by the twin shear strength theory[J]. Engineering Mechanics, 1996, 13(1):1-7.
[8]魏雪英,杨政, 于澍, 等. 用统一强度理论求解轴对称混凝土板的冲切强度[J]. 工程力学, 2002,15(9):92-96.
WEI Xueying, YANG Zheng, YU Shu, et al. Soluti-on of axisymmetrical punching strength of concrete slabs with the unified strength theory[J]. Engineering Mechanics, 2002, 15(9): 92-96.
[9]易伟建, 刘彪. 基于塑性理论的钢筋混凝土板冲切开裂滑移模型[J]. 西安建筑科技大学学报(自然科学版), 2017, 49(1): 42-47.
YI Weijian, LIU Biao. Crack slip model for punching capacity of reinforced concrete slab based on the plastic theory[J]. J. Xi'an Univ. of Arch. & Tech.,(Natural Science Edition), 2017, 49(1): 42-47.
[10]ALEXANDER S D B, SIMMONDS S H. Bond model for concentric punching shear[J].ACI Structural Journal, 1992, 89(3): 325-328.
[11]KOTSOVOS M D, PAVLOVIC M N. Ultimate limit state design of concrete structures: A New Approach[J]. Thomas T elford, 1999:164.
[12]MUTTONI A. Punching shear strength of reinforced concrete slabs without transverse reinforcement[J]. ACI Structural Journal, 2008, 105(42): 440-445.
[13]BOLLINGER K. Load-carrying behaviour and reinfo-rcement of axisymmetrically loaded reinforced concre-te Plates[D].Dortmund:Abteilung Bauwesen der Universitat,1985: 262.
[14]PARK H, CHOI K, WIGHT JK. Strain-based shear strength model for slender beams without web reinfo-rcement[J]. ACI Structural Journal, 2006, 103(6):783-793.
[15]PARK H G, CHOI K, CHUNG L. Strain-based strength model for direct punching shear of interior slabcolumn connections[J].Engineering Structures, 2011, 33(3): 1062-1068.
[16]BROMS C E. Tangential strain theory for punching failure of flat slabs[J]. ACI Structural Journal, 2016,113(1): 95-98.
[17]MARZOUK H, HUSSEIN A. Experimental investigation on the behavior of high-strength concrete slabs[J]. ACI Structural Journal, 1991, 88(6): 701-713.
[18]易伟建, 杨开. 钢筋混凝土板受冲切承载力可靠度分析[J]. 建筑结构, 2014, 44(14): 1-2.
YI Weijian, YANG Kai. Reliability analysis of punc-hing shear capacity of reinforced concrete slabs [J]. Building Structure, 2014, 44(14): 1-2.
[19]SAGASETA J, TASSINARI L, RUIZ M F, et al. P-unching of flat slabs supported on rectangular colum-ns[J]. Engineering Structures, 2014, 77: 17-20.
[20]易伟建, 邹品增, 邓清. 柱截面形状对板柱节点受冲切性能影响的试验研究[J]. 土木工程学报, 2016, 49(5): 87-90.
YI Weijian, ZOU Pinzeng, DENG Qing. Experiment-al study of the effects of cross-sectional shape of co-lumn on punching shear performance of slab-column connection[J]. China Civil Engineering Journal, 2016,49(5): 87-90.
[21]易伟建, 洪枫, 彭检. 钢筋混凝土板柱节点抗冲切试验研究[J]. 建筑结构, 2016, 46(15): 11-18.
YI Weijian, HONG Feng, PENG Jian. Experimental investigation of punching shear failure of reinforced concrete slab-column connections[J].Building Structure, 2016, 46(15): 11-18.
[22]REGAN P E. Symmetric punching of reinforced con-crete slabs[J]. Magazine of Concrete Research, 1986, 38(136): 115-128.
[23]YOSHIO KAKUTA, AKIO ITOH, YOSHIO FUJITA.Experimental study on punching strength ofreinforceed concrete slabs[J]. Proceedings of the Japan Society of Civil Engineers, 1974, 229: 105-115.

相似文献/References:

[1]杨 勇,张雪昭,焦卫丽.焊接箍筋混凝土框架柱抗震性能试验研究[J].西安建筑科技大学学报(自然科学版),2014,46(03):323.[doi:10.15986/j.1006-7930.2014.03.004]
　YANG Yong,ZHANG Xuezhao,JIAO Weili.Experimental study on seismic performance of reinforced concrete frame columns with welding stirrups[J].J. Xi'an Univ. of Arch. & Tech.(Natural Science Edition),2014,46(06):323.[doi:10.15986/j.1006-7930.2014.03.004]
[2]程凯凯,姚继涛.钢筋混凝土预制构件裂缝宽度检验的可靠性分析[J].西安建筑科技大学学报(自然科学版),2014,46(03):376.[doi:10.15986/j.1006-7930.2014.03.012]
　CHENG Kaikai,YAO Jitao.Reliability analysis of crack width inspection for prefabricated members of reinforced concrete[J].J. Xi'an Univ. of Arch. & Tech.(Natural Science Edition),2014,46(06):376.[doi:10.15986/j.1006-7930.2014.03.012]
[3]栾 娟,郝宪武,段瑞芳.基于吊拉协同方法的钢筋混凝土系杆拱加固效果研究[J].西安建筑科技大学学报(自然科学版),2018,50(02):214.[doi:10.15986/j.1006-7930.2018.02.010]
　LUAN Juan,HAO Xianwu,DUAN Ruifang.Reinforcement effect of reinforced concrete tied arch based on[J].J. Xi'an Univ. of Arch. & Tech.(Natural Science Edition),2018,50(06):214.[doi:10.15986/j.1006-7930.2018.02.010]
[4]祝明桥,颜泽峰,陈 林,等.面向双层交通的混凝土箱梁桥弹性试验研究[J].西安建筑科技大学学报(自然科学版),2019,51(02):198.[doi:10.15986/j.1006-7930.2019.02.007]
　ZHU Mingqiao,YAN Zefeng,CHEN Lin,et al.Experimental study of the elastic behavior of a novel RC box girder[J].J. Xi'an Univ. of Arch. & Tech.(Natural Science Edition),2019,51(06):198.[doi:10.15986/j.1006-7930.2019.02.007]
[5]鹿 婷,金祖权,陈兆毅,等.杂散电流与氯盐作用下埋地混凝土中钢筋锈蚀研究[J].西安建筑科技大学学报(自然科学版),2023,55(04):484.[doi:10.15986/j.1006-7930.2023.04.002 ]
　LU Ting,JIN Zuquan,CHEN Zhaoyi,et al.Study on corrosion of reinforcement in buried concrete under the action of stray current and chlorine salt[J].J. Xi'an Univ. of Arch. & Tech.(Natural Science Edition),2023,55(06):484.[doi:10.15986/j.1006-7930.2023.04.002 ]
[6]董 征,付传清,陆晨涛,等.基于钢筋加速非均匀锈蚀的混凝土保护层胀裂预测[J].西安建筑科技大学学报(自然科学版),2023,55(04):598.[doi:10.15986/j.1006-7930.2023.04.016 ]
　DONG Zheng,FU Chuanqing,LU Chentao,et al.Prediction of concrete cover cracking based on accelerated non-uniform corrosion of reinforcing steel bars[J].J. Xi'an Univ. of Arch. & Tech.(Natural Science Edition),2023,55(06):598.[doi:10.15986/j.1006-7930.2023.04.016 ]

备注/Memo

备注/Memo:
收稿日期:2020-07-09 修改稿日期:2020-11-16
基金项目:国家自然科学基金资助项目(51878540,51608434); 国家重点研发计划基金资助项目(2017YFC0703406)
第一作者:王 朋(1987-),男,博士,副教授,主要从事钢-混凝土组合结构与混合结构、工程结构抗震研究.E-mail:wangpeng@xauat.edu.cn 通信作者:于 彬(1997-),男,硕士研究生,主要从事钢-混凝土组合结构与混合结构研究.E-mail:a1070000@163.com

更新日期/Last Update: 2020-12-20