[1]张 铮,陈学超,庄金平,等.H 形截面6061-T6 铝合金轴心受压构件试验及计算方法研究[J].西安建筑科技大学学报：自然版,2016,48(02):195-201,206.[doi:10.15986/j.1006-7930.2016.02.008]
　ZHANG Zheng,CHEN Xuechao,ZHUANG Jinping,et al.Experimental investigation and numerical method research on axially loaded H-section 6061-T6 aluminium compression members[J].J.Xi’an Univ. of Arch. & Tech.：Natural Science Edition,2016,48(02):195-201,206.[doi:10.15986/j.1006-7930.2016.02.008]
点击复制

H 形截面6061-T6 铝合金轴心受压构件试验及计算方法研究()
分享到：

西安建筑科技大学学报：自然版[ISSN:1006-7930/CN:61-1295/TU]

卷:
48
期数:
2016年02期
页码:
195-201,206
栏目:
出版日期:
2016-04-28

文章信息/Info

Title:
Experimental investigation and numerical method research on axially loaded H-section 6061-T6 aluminium compression members
文章编号:
1006-7930(2016)02-0195-07
作者:
张 铮1; 2; 陈学超3; 庄金平1; 2; 郑秀梅1
1. 福建工程学院土木工程学院, 福建 福州 350118；2. 福建省土木工程新技术与信息化重点实验室，福建 福州 350118；3. 福州大学土木工程学院, 福建 福州 350116
Author(s):
ZHANG Zheng1; 2;  CHEN Xuechao3;  ZHUANG Jinping1; 2;  ZHENG Xiumei1
 1. School of Civil Engineering, Fujian University of Technology, Fuzhou 350118, China; 2. Fujian Provincial Key Laboratory of Advanced Technology and Informatization in Civil Engineering, Fuzhou 350118, China; 3. College of Civil Engineering, Fuzhou University, Fuzhou 350116, China
关键词:
铝合金轴心受压构件; H 形截面; 6061-T6; 稳定系数; 柱子曲线
Keywords:
axially loaded aluminium compression members;  H-section;  6061-T6;  stability coefficient;  column curve
分类号:
TU395
DOI:
10.15986/j.1006-7930.2016.02.008
文献标志码:
A
摘要:
以长细比为主要参数，测试了6 个两端铰支的H 形截面6061-T6 铝合金挤压型材轴压构件的稳定承载力，所有试件均在强轴平面内发生了整体弯曲屈曲，得到了实测稳定系数．同时进行了铝合金材料的性能测试，获得了材性数据．建立了有限元分析模型，并经由试验结果的验证．进行了参数分析，并据此建议了新的柱子曲线．将GB50429、EN1999 和建议的柱子曲线与参数分析结果和国内现有试验数据分别进行了比较，发现这两部规范的计算结果很接近且均过于保守，而建议的柱子曲线与参数分析和试验结果均吻合最好且总体偏于安全，可供工程应用和规范修订参考．
Abstract:
Stability tests were conducted on axially loaded extruded H-section 6061-T6 aluminum compression members. The main parameters varied in the tests are slenderness ratio. All 6 specimens that were hinged at both ends and tested failed by overall flexural buckling in the plane of the major axis. The measured stability coefficients were determined. At the same time, the performances of aluminum alloy material used in test were surveyed, and the material property data were obtained. The finite element analysis model was established and verified by the test results. A series of parametric analysis was carried out, and on the basis of this a new column curve was proposed by a nonlinear
fitting. The computational column curves of GB50429, EN1999 and the proposal were compared with the parametric analysis results and the domestic existing test data at home. It is found that the two codes are very close and both are too conservative. Meanwhile, the proposed column curve is in agreement with the parametric analysis results and the experimental results and are overall safety, which can provide useful information for engineering application and specification revision of such aluminium structures.

参考文献/References:

[1] Federico M. Mazzolani. Aluminium structural design[M].New York: Springer-Verlag Wien, 2003.

[2] Design of aluminium structures-general structural rules: EN1999-1-1:2007 [S]. Brussels: CEN, 2007.

[3] Aluminum design manual 2005: Specifications for aluminum structures[S]. Arlington: AA, Inc., 2005.

[4] 沈祖炎, 郭小农. 对称截面铝合金挤压型材压杆的稳定系数[J]. 建筑结构学报, 2001, 22(4): 31-36.

SHEN Zhuyan, GUO Xiaonong. Column curves of aluminum alloy extruded members with symmetrical sections[J].Journal of Building Structures,2001,22(4): 31-36.

[5] 李明, 陈扬骥, 钱若军, 等. 工字形铝合金轴压构件稳定系数的试验研究[J]. 工业建筑, 2001, 31(1): 52-54.

LI Ming, CHEN Yangji, QIAN Ruojun, et al. Experimental research on stability parameters for I-section aluminium alloy bars loaded by axial compressive force[J].Industrial Construction, 2001, 30(1): 52-54.

[6] 金鑫. 单轴对称截面铝合金压杆极限承载力研究[D].上海: 同济大学, 2005.

JIN Xin. Study on resistance of uniaxial symmetrical aluminum alloy compression members[D]. Shanghai: Tongji University, 2005.

[7] 石永久, 程明, 王元清. 铝合金轴心受压构件的整体稳定性研究[J]. 山东建筑工程学院学报, 2005, 20(5):11-16.

SHI Yongjiu, CHENG Ming, WANG Yuanqing. Research of stability of aluminum alloy axial compression members[J]. Journal of Shandong University of Architecture and Engineering, 2005, 20(5): 11-16.

[8] 吴芸, 张其林. 纵向焊接铝合金柱设计方法研究[J]. 土木工程学报, 2007, 40(4): 21-26.

WU Yun, ZHANG Qilin. A study on the design method for aluminum columns with longitudinal welds[J]. China Civil Engineering Journal, 2007, 40(4): 21-26.

[9] 郭小农, 沈祖炎, 李元齐, 等. 铝合金轴心受压构件理论和试验研究[J]. 建筑结构学报, 2007, 28(6): 118-127.

GUO Xiaonong, SHEN Zhuyan, LI Yuanqi, et al. Theoretical and experimental research on aluminum alloy members under axial compression [J]. Journal of Building Structures, 2007, 28(6): 118-127.

[10] 翟希梅, 吴海, 王誉瑾, 等. 铝合金轴心受压构件的稳定性研究与数值模拟[J]. 哈尔滨工业大学学报, 2011,43(12): 1-6.

ZAI Ximei, WU Hai, WANG Yujin, et al. Stability research and numerical simulation of high strength aluminum alloy column in compression [J]. Journal of Harbin Institute of Technology, 2011, 43(12): 1-6.

[11] 谭金涛, 张伟, 汤雪锋, 等. 工字型铝合金轴心受压构件中美设计规范对比[J]. 四川建筑科学研究, 2014,40(1): 61-64.

TAN Jintao, ZHANG Wei, TANG Xuefeng, et al. Comparison between Chinese code and American code of aluminum alloy member under axially load [J]. Sichuan Building Science, 2014, 40(1): 61-64.

[12] 铝合金结构设计规范:GB50429-2007[S]. 北京: 中国标准出版社, 2007.

Code for design of aluminium structures:GB50429-2007, [S]. Beijing: Standards Press of China, 2007.

[13] 金属材料室温拉伸试验方法: GB/T 228-2002[S]. 北京: 中国标准出版社, 2002.

Metallic materials-Tensile testing at ambient temperature: GB/T 228-2002, [S]. Beijing: Standards Press of China, 2002.

[14] 郭小农, 沈祖炎, 李元齐, 等. 国产结构用铝合金材料本构关系及物理力学性能研究[J]. 建筑结构学报, 2007, 28(6): 110-117.

GUO Xiaonong, SHEN Zhuyan, LI Yuanqi, et al. Stress strain relationship and physical mechanical properties of domestic structural aluminum [J]. Journal of Building Structures, 2007, 28(6): 110-117.

备注/Memo

备注/Memo:
收稿日期：2015-07-08 修改稿日期：2016-04-10
基金项目：国家自然科学基金资助项目(51478119)，福建省高校杰出青年科研人才培育计划资助项目(JA13209)
作者简介：张铮(1978－)，男，博士，副教授，主要从事钢结构和组合结构方面的研究．E-mail：frp_creep@sina.com
更新日期/Last Update: 2016-05-22