[1]冉红东,朱兵,赵道程,等.双角钢组合截面构件在往复弯曲下的恢复力模型研究[J].西安建筑科技大学学报(自然科学版),2017,49(06):827-834.[doi:10.15986/j.1006-7930.2017.06.009]
　RAN Hongdong,ZHU Bing,ZHAO Daocheng,et al.Study on restoring force model of double-angle built-up members under cyclic bending[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2017,49(06):827-834.[doi:10.15986/j.1006-7930.2017.06.009]
点击复制

双角钢组合截面构件在往复弯曲下的恢复力模型研究()
分享到：

西安建筑科技大学学报（自然科学版）[ISSN:1006-7930/CN:61-1295/TU]

卷:
49
期数:
2017年06期
页码:
827-834
栏目:
出版日期:
2017-12-31

文章信息/Info

Title:
Study on restoring force model of double-angle built-up members under cyclic bending
文章编号:
1006-7930(2017)06-0827-08
作者:
冉红东1; 朱兵2; 赵道程3; 弓欢学1; 杨靖4
(1.西安建筑科技大学 土木工程学院,陕西 西安 710055；2.中冶京诚工程技术有限公司，北京 100176；3.中冶建筑研究总院有限公司，北京 100088；4.西安鹏程爆破工程有限公司，陕西 西安 710065)
Author(s):
RAN Hongdong1;  ZHU Bing2;  ZHAO Daocheng3;  GONG Huanxue1;  YANG Jing4
(1. School of Civil Engineering, Xi′an Univ. of Arch. & Tech., Xi′an 710055,China; 2. Capital Engineering & Research Incorporation Ltd, Beijing 100176,China; 3. Central Research Institute of Building and Construction of China Metallurgical Group Corporation, Beijing 100088, China; 4. Xi′an Pengcheng Blasting Engineering Co. Ltd, Xi′an 710065, China)
关键词:
延性交错桁架钢框架结构; 双角钢组合截面; 往复弯曲; 骨架曲线; 恢复力模型
Keywords:
special staggered truss steel frame structure;  double-angle built-up members;  cyclic bending;  skeleton curves;  restoring force model
分类号:
TU391
DOI:
10.15986/j.1006-7930.2017.06.009
文献标志码:
A
摘要:
为建立延性交错桁架钢框架结构双角钢组合截面弦杆在往复弯曲下的恢复力模型，对6个双角钢组合截面足尺试件进行了低周往复加载试验，研究了填板间距及加劲肋布置对构件滞回性能的影响.通过对试验数据的回归分析，得到了试件的骨架曲线及刚度退化规律，确定了双角钢组合截面弦杆的恢复力模型，其骨架曲线为弹性阶段、强化阶段和承载力退化阶段组成的三折线模型.最后，进行了计算骨架曲线、恢复力模型与试验骨架曲线、滞回曲线的对比分析，结果吻合较好.计算结果表明，提出的恢复力模型可以良好的表达延性交错桁架钢框架结构双角钢组合截面弦杆的承载力和刚度退化等特征，可为结构的非线性动力分析提供参考.
Abstract:
To establish the restoring force model of double-angle built-up chords under cyclic bending in special staggered truss steel frame structure, six full-size double-angle built-up specimens were tested under cyclic bending, and the influence of the stitch spacing and stiffeners settings on the hysteretic behavior of the specimens were studied. Through analysis of test dates, the skeleton curve and rigidity degradation rule of the specimens were obtained and the restoring force models were determined as well. The three-liner skeleton curve of the restoring force was composed of the elastic stage, the reinforcement stage as well as bearing-degradation stage. Finally, the calculating skeleton curve and the restoring force model with the test skeleton curve and hysteretic curve were compared. The calculating model showed good agreement with the test curve. It showed that the calculating restoring force model can well express the bearing-capacity and rigidity degradation characteristics of the double-angle built-up chords in special staggered truss steel frame structure and can offer reference for the nonlinear dynamic analysis of the structure.

参考文献/References:

[1]姚谦峰. 地震工程[M]. 北京: 中国建筑工业出版社,2001:198. YAO Qianfeng. Earthquake engineering[M]. Beijing: China Building Industry Press,2001:198. [2]李国强,李杰. 地震工程学导论[M]. 北京: 地震出版社,1992. LI Guoqiang, LI Jie. Introduction to earthquake engineering[M]. Beijing: Earthquake Press,1992. [3]冉红东. 钢交错桁架结构体系在循环荷载作用下的破坏机理及抗震设计对策[D].西安: 西安建筑科技大学,2008:48-65. RAN Hongdong. Collapse mechanism and design criteria of steel staggered truss framing structure system under cyclic loading [D]. Xi′an：Xi′an Univ. of Arch. & Tech.,2008：48-65. [4]周绪红,周期石. 水平荷载作用下交错桁架结构的内力和侧移计算[J].建筑结构学报,2004,25(4):66-71. ZHOU Xuhong, ZHOU Qishi. Calculation of internal forces and drift of staggered truss structures under lateral loads[J]. Journal of Building Structures,2004,25(4):66-71. [5]陈向荣,宗智芳,冉红东. 基于能量平衡的延性交错桁架塑性设计方法[J].地震工程与工程振动,2015,35(4):236-243. CHEN Xiangrong,ZONG Zhifang, RAN Hongdong. Plastic design of special staggered truss based on energy balance [J]. Earthquake engineering and engineering dynamics,2015,35(4):236-243. [6]GUSTAVO J. PARRA. MONTESINOS Subhash C Goel, KWANG Yeon Kim. Behavior of steel double-channel built up chords of special truss moment frames under reversed cyclic bending [J].Journal of Structural Engineering,2006,132(9):1343-1351. [7]肖岩,周涛,李华. 局部约束轧制H型钢柱的抗震性能研究[J]. 建筑结构学报,2008,29(2):118-124. XIAO Yan, ZHOU Tao, LI Hua. Experimental study of confined hotrolled Hshape steel column under cyclic loading[J]. Journal of Building Structures,2008,29(2):118124. [8]FARHANG Aslani, SUBHASH C. Goel. Stitch spacing and local buckling in seismic resistant double angle braces Journal of Structural Engineering, 1991,8(117):2442-2463. [9]赵仕兴,李正良. 双角钢十字组合截面压杆承载力研究[J]. 钢结构,2012,1(27):5-10. ZHAO Shixing, LI Zhengliang. Study on ultimate strength of eccentric compression members with combined angle iron crosssection[J]. Steel Construction, 2012,1(27):5-10. [10]中华人民共和国建设部. 钢结构设计规范: GB 50017-2003 [S]. 北京: 中国计划出版社,2003. Ministry of Construction of People′s Republic of China: Code for design of steel structures : GB 50017-2003 [S]. Beijing: China Planning Press,2003. [11]中国工程建设标准化协会. 交错桁架钢框架结构技术规程: CECS 323-2012 [S]. 北京: 中国建筑工业出版社,2012. China Association for Engineering Construction Standardization. Technical specification for staggered truss steel framing system: ECS 323-2012 [S]. Beijing: China Architecture & Building Press, 2012. [12]Specification for structure steel buildings-load and resistance factor design:AISC：1999[S].Chicago:American Institute of Steel Construction, Inc, 1999. [13]中华人民共和国建设部. 建筑抗震试验方法规程: JGJ 101-96 [S]. 北京: 中国建筑工业出版社, 1996. Ministry of Construction of People′s Republic of China:Specification of testing methods for earthquake resistant building: JGJ 101-1996 [S]. Beijing: China Architecture & Building Press, 1996.

备注/Memo

备注/Memo:
收稿日期:2016-12-16 修改稿日期:2017-11-14 基金项目:国家自然科学基金青年科学基金项目(51208412)；陕西省教育厅重点实验室项目(15JS049) 第一作者:冉红东(1977—)，男，博士，副教授，主要从事钢结构稳定及抗震研究. E-mail: ranhd@163.com
更新日期/Last Update: 2018-02-11