[1]董 武,冯忠绪,王振鹏,等.围流与对流相结合的搅拌机的设计及试验研究[J].西安建筑科技大学学报(自然科学版),2018,50(02):295-300.[doi:10.15986/j.1006-7930.2018.02.021]
 DONG Wu,FENG Zhongxu,WANG Zhenpeng,et al.Design and experimental study of wai flow combined with convective flow mixer[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2018,50(02):295-300.[doi:10.15986/j.1006-7930.2018.02.021]
点击复制

围流与对流相结合的搅拌机的设计及试验研究()
分享到:

西安建筑科技大学学报(自然科学版)[ISSN:1006-7930/CN:61-1295/TU]

卷:
50
期数:
2018年02期
页码:
295-300
栏目:
出版日期:
2018-05-28

文章信息/Info

Title:
Design and experimental study of wai flow combined with convective flow mixer

文章编号:
1006-7930(2018)0-0295-06
作者:
董 武冯忠绪王振鹏赵 悟 姚运仕
(长安大学 道路施工技术与装备教育部重点实验室 陕西 西安 710064)
Author(s):
DONG WuFENG ZhongxuWANG ZhenpengZHAO Wu YAO Yunshi
(Key Laboratory of Highway Construction Technology and Equipment of Ministry of Education,
Chang′an University,Xi′an 710064, China)

关键词:
机械工程双卧轴搅拌机叶片排列围流对流搅拌均匀性
Keywords:
mechanical engineeringtwin-shaft mixerarrangement pattern of bladewai flowconvective flow mixing uniformity
分类号:
U415.522
DOI:
10.15986/j.1006-7930.2018.02.021
文献标志码:
A
摘要:
为了提高双卧轴搅拌机的搅拌强度与效率,设计了围流与对流相结合的新型搅拌机通过对围流与对流相结合的料流运动特点及叶片排列形式的理论分析,确定了在轴向大围流的基础上在搅拌缸两端设置对流区的总体方案;为了使物料在轴向有更多的推搅频次,并提高围流与对流的发生频次,确定搅拌机的拌缸为“宽短型”,单轴搅拌臂安装相位角为60°,双轴搅拌臂采用正正平行非连续排列,搅拌叶片安装角取55°设计方案应用在100 L搅拌机上与围流为主的普通搅拌机进行搅拌性能对比试验,结果表明:采用围流与对流相结合的搅拌机料流有较高频次的围流运动,又有两个强烈混合的物料对流漩涡区,有效增加了搅拌强度,物料搅拌均匀所需搅拌时间比同类普通搅拌机减少约20%,提高了搅拌效率
Abstract:
In order to improve the mixing intensity and efficiency of twinshaft mixer,a wai flow combined with convective flow mixer was designed Through the study of the characteristics of material flow and the theoretical analysis on arrangement pattern of the blades, two convective flow areas at both ends of mixing cylinder were set up. In order to improve the mixing frequency of mixture in axial and improve the mixing frequency of the wai flow and convective flow,wide and short mixing cylinder was confirmed. The installation phase angle of singleshaft mixing arms was 60° and the twinshaft mixing arms were aligned to be positivepositive parallelly and nonsuccessive,the installation angle of mixing blade was 55°The design scheme was applied to the 100 L mixer. Comparison mixing performance test with ordinary wai flow mixer was carried out Results showed that the wai flow combined with convective flow mixer not only has highfrequency circular wai flow,but also has two intensively mixing swirl areas of mixture by convective flow,which improved the mixing intensity and the mixing time was reduced by 20% compared with the normal twinshaft mixer The mixing efficiency is improved

参考文献/References:

References
[1] 王振鹏.60L双卧轴搅拌机的设计与参数优化 [D].西安:长安大学,2016.
WANG Zhenpeng.Design of the 60L double horizontal shaft mixer and research on the paramerters optimization[D]. Xi'an:Chang'an University,2016.
[2] KEMMANN C. What twin-shaft mixing can do for you[J].Concrete Producer,2004,22(10):47-50 .
[3] YAO Y S,FENG Z X ,CHEN S B.Strength of concrete reinforced using double-blade mixer[J]. Magazine of Concrete Research,2013,65 (13):787-792.
[4] 赵 悟.搅拌装置参数优化的研究[D].西安: 长安大学,2005.
ZHAO Wu. Study on optimization of mixing device parameters[D]. Xi'an: Chang'an University,2005.
[5] 王卫中.双卧轴搅拌机工作装置的试验研究 [D].西安:长安大学,2004.
WANG Weizhong. Research on working device of double-shaft-mixer[D]. Xi'an:Chang'an University,2004.
[6] 冯忠绪,王卫中,赵立军,等.搅拌机参数优化的试验[J].长安大学报(自然科学版),2008,28(6):89-91,110.
FENG Zhongxu,WANG Weizhong,ZHAO Lijun,et al.Test on parameter optimization of mixer[J].Journal of Chang'an University(Natural Science Edition),2008,28(6):89-91,110.
[7] 宋学锋,王锟铭.制备参数对矿渣矿物聚合物透水混凝土性能的影响[J].西安建筑科技大学学报(自然科学版),2017,49(2):284-288.
SONG Xuefeng,WANG Kunming.Influence of preparation parameter on properties of slag-geopolymer pervious concrete[J]. J. Xi′an Univ. of Arch. & Tech (Natural Science Edition),2017,49(2):284-288.
[8] 赵利军,冯忠绪,双卧轴搅拌机叶片排列的试验[J].长安大学学报(自然科学版),2004,24(2):94-96.
ZHAO Lijun,FENG Zhongxu.Test of blades arrangement
[9] HEMALAHA T,SUNDAR K R R,MURTHY A R,et al.Influence of mixing protocol on fresh and hardened properties of self-compacting concrete[J].Construction and Building Materials,2015,98:119-127.
[10] 赵利军,余志龙,徐鹏杰,等.返回叶片数量及排布方式对混凝土搅拌均匀性的影响[J].长安大学报(自然科学版),2016,36(4):103-110.
ZHAO Lijun,YU Zhilong, XU Pengjie, et al. Influence of number and arrangement pattern of reversing blade on mixing uniformity of concrete[J].Journal of Chang'an University (Natural Science Edition),2016,36(4):103-110.
[11] 赵利军.搅拌低效区及其消除方法的研究 [D].西安:长安大学,2005.
Zhao Lijun. Research on mixing inefficient zone and its eliminating methods [D]. Xi'an:Chang'an University,2005.
[12] 尹小琴,赵守明,谢 俊,等.双卧轴搅拌机搅拌臂数目理论分析 [J].武汉理工大学学报,2010,32(23),95-98.
YIN Xiaoqin, ZHAO Shouming, XIE Jun, et al. The oretical analysis on the number of mixing arms of twin-shaft mixer[J]. 2005. Journal of Wuhan University of Technology,2010,32(23):95-98.
[13] 王卫中,冯忠绪,双卧轴搅拌机搅拌臂布置形式的研究[J].中国工程机械学报,2004,2(4):437-440.
WANG Weizhong,FENG Zhonxu,Research on mixing arm'
[14] 冯忠绪,李 彰,王卫中,等.搅拌机搅拌臂数目与叶片面积的确定方法[J].长安大学学报(自然科学版),2009,29(4):106-110.
FENG Zhongxu,LI Zhang,WANG Weizhong,et al. Method for determining number of mixing arm and area of mixing blade in mixer [J] Journal of Chang'
[15] GB/T 9142-2000 混凝土搅拌机[S].北京:中国标准出版社,2000.

备注/Memo

备注/Memo:
收稿日期:2017-10-31 修改稿日期:2018-03-27
基金项目:国家自然科学基金资助项目(50678026);陕西省重大科技创新专项资金计划项目(2008ZKC0116);中央高校基金(310825151044)
第一作者:董武(1979-),男,工程师,博士研究生,主要从事混凝土搅拌理论及试验研究.E-mail: comdw@chd.edu.cn
更新日期/Last Update: 2018-05-28