[1]黄会荣,贺明辉,张 希.旋挖钻机桅杆瞬态动力学与疲劳研究[J].西安建筑科技大学学报(自然科学版),2021,53(03):445-451.[doi:10.15986/j.1006-7930.2021.03.017]
　HUANG Huirong,HE Minghui,ZHANG Xi.Transient dynamics and fatigue analysis of the mast of rotary drilling rig[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2021,53(03):445-451.[doi:10.15986/j.1006-7930.2021.03.017]
点击复制

旋挖钻机桅杆瞬态动力学与疲劳研究()
分享到：

西安建筑科技大学学报（自然科学版）[ISSN:1006-7930/CN:61-1295/TU]

卷:
53
期数:
2021年03期
页码:
445-451
栏目:
出版日期:
2021-06-28

文章信息/Info

Title:
Transient dynamics and fatigue analysis of the mast of rotary drilling rig
文章编号:
1006-7930(2021)03-0445-07
作者:
黄会荣1; 贺明辉2; 张 希1
(1.西京学院 土木工程学院,陕西 西安 710123; 2.西安建筑科技大学 机电工程学院,陕西 西安 710055; 3.西安陕鼓动力股份有限公司,陕西 西安710075)
Author(s):
HUANG Huirong1; HE Minghui2; ZHANG Xi1
(1.School of Civil Engineering,Xijing university,Xi’an 710123,China; 2.School of Mechanical and Electrical Engineering,Xi’an Univ. of Arch. & Tech.,Xi’an 710055,China; 3.Xi’an Shaangu Power Co. Ltd.,Xi’an 710075,China)
关键词:
旋挖钻机;  桅杆;  瞬态动力学分析;  疲劳分析
Keywords:
rotary drilling rig;  mast;  transient dynamics analysis;  fatigue analysis
分类号:
TU67
DOI:
10.15986/j.1006-7930.2021.03.017
文献标志码:
A
摘要:
为了得到旋挖钻机入岩时桅杆的疲劳寿命与切削深度之间的变化规律,根据短螺旋钻头入岩的理论,建立旋挖钻机钻头入岩时载荷的数学模型,针对组合岩石,模拟短螺旋钻头的工作载荷,然后将得到的载荷应用到桅杆的瞬态动力学响应分析中,确定随机载荷作用下桅杆的危险部位.利用Miner线性疲劳损伤理论,计算得到桅杆危险部位的疲劳寿命.结果表明:在旋挖钻机入岩时的切削深度允许范围内,桅杆危险部位的疲劳寿命随着切削深度的减小而增大,且切削深度减小的幅度相同时,桅杆危险部位疲劳寿命增加幅度的逐渐增大.
Abstract:
In order to get the change rules of the fatigue life of mast and the cutting thickness when the rotary drilling rig digs into rock,this paper establishes the mathematical model of loads for the drill bit based on the theory of short auger bit into the rock,which simulates the load of short auger bit into the composite rock in MATLAB,then applies the obtained load to the analysis of the transient dynamic response of the masts,and obtains the stress of a node of mast. The fatigue life of mast is calculated with Miner fatigue damage theory. The results show: in the range of cutting thickness,the stress of the mast increases with the decrease of cutting thickness. And with the same decreasing amplitude in cutting thickness,the stress on the mast decreases gradually.

参考文献/References:

[1]江涛,游义平.旋挖钻机调桅机构动态特性的一体化建模分析[J].同济大学学报(自然科学版),2012,40(5):730-734.
JIANG Tao,YOU Yiping. Integrated model-based analysis of mast mechanism of rotary drilling rig and its dynamic characteristics[J].Journal of Tongji University(Natural Science),2012,40(5):730-734.
[2]李晓豁,姜丽丽.掘进机截割硬岩的载荷模拟研究[J]. 中国工程机械学报,2008,6(4): 416-417.
LI Xiaohuo,JIANG Lili. Excavator Loading Simulation for Hard-rock Cutting[J].Chinese Journal of Construction Machinery,2008,6(4): 416-417.
[3]罗春雷,丁吉,宋长春,等.基于随机过程理论短螺旋钻头载荷的数学模型[J].中南大学学报(自然科学版),2012,43(12):4702- 4706.
LUO Chunlei,DING Ji,SONG Changchun,et al. Mathematical Model of Loads for Short Helix Bit Based on Random Process Theory[J].Journal of Central South University(Science and Technology),2012,43(12): 4702- 4706.
[4]王想,王清峰,谭正生.纵轴式截割头截齿布置对破岩载荷规律的影响[J].工程设计学报,2012,19(1):40-42.
WANG Xiang,WANG Qingfeng,TAN Zhengsheng. The Effects of Picks Arrangement on Loads Law of rock Cutting with Longitudinal Cutting Head[J].Chinese Journal of Engineering Design,2012,19(1):40-42.
[5]贺明辉. 基于ANSYS的旋挖钻机桅杆疲劳分析[D]. 西安: 西安建筑科技大学,2017.
HE Minghui. Fatigue analysis of the mast for rotary drilling rig based on ANSYS[D]. Xi’an: Xi’an Univ. of Arch. & Tech.,2017.
[6]LIU Songyong,DU changlong,CUI Xinxia. Research on the cutting force of a pick[J].Mining Science and Technogy,2009,19(4): 514-517.
[7]GOKAN R M,GUNES N. A semi-empirical approach to cutting force prediction for point-attactpicks[J]. Journal of the South African Institute of Mining & Metallurgy,2005,105(4): 257-263.
[8]李晓豁,葛怀挺.连续采煤机截齿随机载荷的数学模型[J].中国工程机械学报,2006,4(3):262-264.
LI Xiaohuo,GE Huaiting. Mathematical model of stochastic pick loads for a continuous miner[J].Chinese Journal of Construction Machinery,2006,4(3):262-264.
[9]王子,苏铁熊,王军.基于ANSYS的V型发动机曲轴瞬态动力学分析[J].机电工程技术,2014,43(12): 190-193.
WANG Zi,SU Tiexiong,WANG Jun. Transient kinetic analysis of V-type engine crankshaft based on ANSYS[J]. Mechanical & Electrical Engineering Technology,2014,43(12): 190-193.
[10]吴永红.旋挖钻机钻桅有限元强度分析及其结构参数优化[D].长沙:中南大学,2010.
WU Yonghong. Finite element strength analysis and structural parameter optimization of drill mast of rotary drilling rig[D].Changsha: Central South University,2010.
[11]赵少汴. 抗疲劳设计手册[M]. 北京: 机械工业出版社,2015.
ZHAO Shaobian. Anti-fatigue design manual[M]. Beijing: China Machine Press,2015.
[12]杨晓华,姚卫星,段成美. 确定性疲劳累积损伤理论进展[J].中国工程科学,2003,5(4): 81-87.
YANG Xiaohua,YAO Weixing. DUAN Chengmei. Theoretical Progress of Deterministic Fatigue Accumulation Injury[J].Engineering Science,2003,5(4): 81-87.
(编辑 吴海西 沈 波)

相似文献/References:

[1]张立君,刘先珊,牛万保,等.旋挖机钻进过程的力学响应特征及地层强度确定[J].西安建筑科技大学学报(自然科学版),2023,55(05):667.[doi:10.15986/j.1006-7930.2023.05.006]
　ZHANG Lijun,LIU Xianshan,NIU Wanbao,et al.Characteristic of mechanical response for drilling fragmentation by rotary drilling rigs and determination of the strata strength[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2023,55(03):667.[doi:10.15986/j.1006-7930.2023.05.006]

备注/Memo

备注/Memo:
收稿日期:2019-01-08 修改稿日期:2021-05-10
基金项目:陕西省自然科学基金项目(2017JM5122)
第一作者:黄会荣(1963-),女,教授,主要从事工程机械的现代设计理论与方法,钢结构理论与设计方面的研究.E-mail: xianjiandajiejie@163.com
更新日期/Last Update: 2021-06-28