[1]史庆轩,王 峰,王 朋,等.斜交网格X型节点轴压承载力性能研究[J].西安建筑科技大学学报(自然科学版),2017,49(02):155-163.[doi:10.15986/j.1003-7930.2017.02.001]
 SHI Qingxuan,WANG Feng,WANG Peng,et al.Investigation of axial bearing capacity of X-nodes in diagrid structures[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2017,49(02):155-163.[doi:10.15986/j.1003-7930.2017.02.001]
点击复制

斜交网格X型节点轴压承载力性能研究()
分享到:

西安建筑科技大学学报(自然科学版)[ISSN:1006-7930/CN:61-1295/TU]

卷:
49
期数:
2017年02期
页码:
155-163
栏目:
出版日期:
2017-04-28

文章信息/Info

Title:
Investigation of axial bearing capacity of X-nodes in diagrid structures
文章编号:
1006-7930(2017)02-0155-09
作者:
史庆轩王 峰王 朋吴超锋
(西安建筑科技大学土木工程学院,陕西 西安 710055 )
Author(s):
SHI Qingxuan WANG Feng WANG Peng WU Chaofeng
(School of Civil Engineering, Xian Univ. of Arch. & Tech., Xian 710055, China )
关键词:
斜交网格结构X型节点钢管混凝土非线性分析轴压承载力
Keywords:
diagrid structure s X-nodes concrete-filled steel tube nonlinear analysis compressive bearing capacity
分类号:
TU317+.1
DOI:
10.15986/j.1003-7930.2017.02.001
文献标志码:
A
摘要:
采用ABAQUS分析软件对斜交网格X型节点进行轴压荷载作用下的非线性分析,依据轴压荷载作用下节点各组成部分的应力分布情况及钢管混凝土短柱工作机理和Mises屈服准则,提出了该类型节点的承载力计算公式。同时,以相贯角度、宽厚比、竖向连接板厚度、衬板厚度、混凝土强度、加强环厚度为控制参数,分析其对斜交网格X型节点承载力及公式适用性的影响。研究表明:采用竖向连接板、衬板、加强环较好的改善了对节点区混凝土的约束作用;相贯角度、宽厚比、混凝土强度对节点承载力影响较大,竖向连接板厚度、衬板厚度、加强环厚度对承载力影响相对较小;计算公式的参数选取合理,计算值精确度较高,可用于工程中构件承载力的计算。
Abstract:
Analysis software of ABAQUS is used to nonlinear analysis for X-nodes of diagrid structure s under axial compress ion load . The calculation formula of bearing capacity for the nodes is proposed based on the stress distribution of each component of the nodes under axial compressive load , the working mechanism of concrete-filled steel tubular short columns and the yield criterion of Mises. Then, according to the controls parametric of intersecting angle, width-thickness ratio, thickness of vertical connecting plate and lining plate, concrete strength and thickness of stiffening ring, which effect to the applicability of the calculation formula and the bearing capacity for the X-nodes of diagrid structure . The research shows that vertical connecting plate, lining plate and stiffening ring of the nodes could all improve the confinement effect of concrete . The parametric of calculation formula of bearing capacity is reasonable and the precision of calculated results is high. I ntersecting angle, width-thickness ratio and concrete strength all have great influence on the bearing capacity of the X-nodes, while thickness of vertical connecting plate, lining plate and stiffening ring all have little influence on the bearing capacity of the X-nodes.

参考文献/References:

Reference

[1] 容柏生. 国内高层建筑结构设计的若干进展[J]. 建筑结构, 2007, 37(9): 1-5, 34.

RONG Baisheng. Progress of High-rise Building’s Structural Design in China[J]. Building Structure, 2007, 37(09): 1-5, 34.

[2] 徐培福, 王翠坤, 肖从真. 中国高层建筑结构发展与展望[J]. 建筑结构, 2009, 39(9): 28-32.

XU Peifu, WANG Cuikun, XIAO Congzhen. Developme-

nt and prospect of high-rise building structures in China[J]. Building Structure, 2009, 39(9):28-32.

[3] 李真. 180m的生态环境摩天楼瑞士再保险公司大厦[J]. 时代建筑, 2005(4): 74-81.

LI Zhen. Ecological 180m: environmental skyscraper of the swiss re[J]. Time Architecture, 2005(4): 74-81.

[4] 傅学怡, 吴兵, 陈贤川, 等. 卡塔尔某超高层建筑结构设计研究综述[J]. 建筑结构学报, 2008, 29(1): 1-9, 15.

FU Xueyi, WU Bing C HEN Xianchuan, et al. Summariza-

ion of research on the structural design of a super high-rise building in Qatar[J]. Journal of Building Structures, 2008, 29(1): 1-9, 15.

[5] MOON K S, C ONNOR J J, FERNANDEZ J E. Diagrid structural system for tall building: characteristics and methodology for preliminary design[J]. The Structural Desi-

gn of Tall and Special Buildings, 2007, 16(2): 205-230.

[6] BAKER W, B ESJAK C, P AWLIKOWSKI J, et al. 555m tall lotte super tower, Seoul, Korea[C]//Seoul, IABSE Congress Report, 2007: 472-473.

[7] 方小丹, 韩小雷, 伟宏, 等. 广州西塔巨型斜交网格平面相贯节点试验[J]. 建筑结构学报, 2012, 31(1): 56-62.

FANG Xiaodan, HAN Xiaolei, WEI Hong, et al. Experime-

ntal study on planar intersecting connections in huge obliquely crossing lattice of Guangzhou West Tower[J]. Journal of Building Structures, 2012 ,31 (1): 56-62.

[8] HU H T, H UANG C S, C HEN Z L. Finite element analysis of CFT columns subjected to an axial compressive force and bending moment in combination[J]. Journal of Constructio-

nal Steel Research, 2005, 61(12): 1692-1712.

[9] HAN Linhai, LIU Wei, Y ANG Youfu. Behaviour of concr ete filled steel tubular stub columns subjected to axially local compression[J]. Journal of Constructional Steel Research, 2008, 64(3): 377-387.

[10] 季静, 方小丹, 韩小雷, 等. 钢管混凝土空间相贯节点试验与研究[J]. 工程力学, 2009, 26(5): 102-109.

JI Jing, F ANG Xiaodan, HAN Xiaolei ,et al. Experiment and study on the CFST space intersecting connection[J]. Enginnering Mechanics, 2009, 26(5): 102-109.

[11] HAN Xiaolei, HUANG Chao, J I Jing, et al. Experimental and numerical investigation of the axial behavior of connection in CFST diagrid structures[J]. Tsinghua Science and Technology, 2008, 13(S1): 108-113.

[12] 李威. 圆钢管混凝土柱—钢梁外环板式框架节点抗震性能研究[D]. 北京: 清华大学, 2011.

LI Wei. Study on the seismic performance of circular concrete-filled steel tubular column to steel beam joint with external diaphragm[D]. Beijing: Tsinghua University, 2011.

[13] 中华人民共和国住房和城乡建设部. 混凝土结构设计规范: GB 50010-2010[S]. 北京: 中国建筑工业出版社, 2010.

Ministry of Housing and Urban-Rural Construction of the P. R. C. Code for design of concrete structures: GB 50010-2010[S]. Beijing: China Architecture & Building Press, 2010.

[14] 韩林海. 钢管混凝土结构-理论与试践[M]. 北京: 科学出版社, 2004.

HAN Linhai. Concrete filled steel tubular structure – theory and practice[M]. Beijing: Science Press, 2004.

[15] 过镇海. 钢筋混凝土原理[M]. 北京: 清华大学出版社, 2013.

GUO zhenhai. Principle of reinforced concrete[M]. Beijing: Tsinghua University Press, 2013.

[16] 张玉芬, 赵均海, 刘一颖. 基于双剪统一强度理论的复式钢管混凝土轴压承载力计算[J]. 力学与实践, 2012, 34(3): 36-42.

更新日期/Last Update: 2017-06-08