[1]黄丽华,杨文斌,徐 嘉.冷弯薄壁槽钢轴压屈曲承载力设计方法比较[J].西安建筑科技大学学报(自然科学版),2020,52(02):177-183.[doi:10.15986/j.1006-7930.2020.02.004]
 HUANG Lihua,YANG Wenbin,XU Jia.Comparison of design methods for axially buckling loads of cold-formed thin-walled channels[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2020,52(02):177-183.[doi:10.15986/j.1006-7930.2020.02.004]
点击复制

冷弯薄壁槽钢轴压屈曲承载力设计方法比较()
分享到:

西安建筑科技大学学报(自然科学版)[ISSN:1006-7930/CN:61-1295/TU]

卷:
52
期数:
2020年02期
页码:
177-183
栏目:
出版日期:
2020-04-25

文章信息/Info

Title:
Comparison of design methods for axially buckling loads of cold-formed thin-walled channels
文章编号:
1006-7930(2020)02-0177-07
作者:
黄丽华杨文斌徐 嘉
(大连理工大学 建设工程学部,辽宁 大连 116024)
Author(s):
HUANG LihuaYANG Wenbin XU Jia
(Faculty of Infrastructure Engineering, Dalian University of Technology, Dalian 116024, China)
关键词:
冷弯薄壁型钢 轴压承载力 有效宽度法 直接强度法 槽形截面
Keywords:
Cold-formed thin-walled steel axial compression capacity effective width method direct strength method channel section
分类号:
TU392.1
DOI:
10.15986/j.1006-7930.2020.02.004
文献标志码:
A
摘要:
在各国轻钢结构设计规范中,冷弯薄壁型钢轴压承载力的计算主要基于有效宽度法和直接强度法.本文通过研究美国钢铁协会(AISI)规范和中国冷弯钢规范(GB 50018—2014征求意见稿)中有效宽度法和直接强度法的计算公式,以76根常规槽形截面试验杆件为对象,对比基于不同计算方法得到的轴压承载力,分析两国规范中基于两种算法计算结果的精度、可靠性和差异性.计算结果表明:中国规范(意见稿)的直接强度法和美国规范的有效宽度法计算结果和试件试验承载力更接近,中国规范(意见稿)的有效宽度法的计算结果偏保守,而美国规范的直接强度法计算的承载力偏危险且离散性最大
Abstract:
In the light steel structure design codes of various countries, the calculation of the axially buckling loads of cold-formed thin-walled steel members is mainly based on the effective width method and direct strength method. In this paper, through the study of the formulas in American Iron and Steel Institute(AISI)and the Chinese Cold-formed Steel Specification(GB 50018—2014 draft), 76 specimens of regular channel sections are taken as the objects, the comparison of axially buckling loads obtained from the different calculation methods with the experiment results was conducted. The accuracy, reliability and the differences of calculation results based on the algorithms in the two countries’ specifications are analyzed. Results show that the calculation results of the direct strength method in the Chinese code(draft)and the effective width method in the American code are closer to the bearing capacity of the specimens. The calculation results of the effective width method in the Chinese code(draft)are conservative, while the calculation results of the direct strength method in the American code are dangerous and discrete

参考文献/References:

[1] CHEN Ju, HE Yong, JIN Weiliang.Stub column tests of thin-walled complex section with intermediate Stiffeners[J].Thin-walled structures,2010,48(6):423-429.
[2] 陈骥.冷弯薄壁型钢构件的直接强度设计法[J].建筑钢结构进展,2003,5(4):5-13.
CHEN Ji. Direct strength design method for cold-formed thin-walled steel members[J].Progress of building Steel Structures, 2003,5(4):5-13.
[3] American Iron and Steel Institute. North American specification for the design of cold-formed steel structural members: S100—2016 [S].Washington D C: American Iron and Steel Institute, 2016.
[4] 中南建筑设计院股份有限公司.冷弯型钢结构技术规范:GB 50018—2014(征求意见稿)[S]. 2016.
Central South Aochitectual Design Lnstitute co.LTD. Technical Code of Cold-Formed Steel Structures: GB 50018—2014(Exposure Draft)[S]. 2016.
[5] KARMAN T, SECHLER E E, DONNEL L H.The strength of thin plates in compression[J.Transactions of the ASME,1932,54(5):53-56.
[6] WINTER G.Strength of thin steel compression flanges[J]. Transactions of the ASCE, 1947,112: 527-554.
[7] PEKOZ T. Development of a unified approach to the design of cold-formed steel members[R]. Washington DC: American Iron and Steel Institute, 1986: 9-26.
[8] 陈骥.钢结构稳定理论与设计[M].5版. 北京:科学出版社, 2011.
CHEN Ji. Stability theory and design of steel structure[M]. 5th edi. Beijing: Science Press, 2011.
[9] 中华人民共和国住房与城乡建设部.冷弯薄壁型钢结构技术规范:GB 50018—2002[S].北京:中国计划出版社,2002.
Ministry of Construction of P. R. China. Technical code of cold-formed thin-walled steel structures: GB 50018—2002[S]. Beijing: China Planning Press, 2002.
[10]SCHAFER B W, PEKOZ T. Direct strength prediction of cold-formed steel members using numerical elastic buckling solutions[C]//14th International Specialty Conference on Cold-Formed Steel Structures,St.Louis:Missouri, 1998: 137-144.
[11]SCHAFER B W. Local, Distortional, Euler buckling of thin-walled columns[J]. Journal of Structural Engineering,2002,128(3):289-299.
[12]YOUNG B, RASMUSSEN K.Tests of fixed-ended plain channel columns[J].Journal of Structural Engineering,1998, 124(2):131-139.
[13]YOUNG B, RASMUSSEN K. Design of lipped channel columns[J].Journal of Structural Engineering, 1998,124(2):140-148.
[14]YOUNG B, SILVESTRE N, CAMOTIM D. Cold-formed steel lipped channel columns influenced by local-distortional interaction: strength and DSM design[J]. Journal of Structural Engineering, 2012,139(6): 1059-1074.
[15]KWON Y B, KIM B S, HANCOCK G J. Compression tests of high strength cold-formed steel channels with buckling interaction[J]. Journal of Constructional Steel Research, 2009, 65(2): 278-289.
[16]LOUGHLAN J, YIDRIS N, JONES K.The Failure of thin-walled lipped channel compression members due to coupled local-distortional interactions and material yielding[J]. Thin-Walled Structures, 2012, 61(6):14-21.
[17]BEBIANO R, SILVESTRE N, CAMOTIM D. GBTUL-a code for the buckling analysis of cold-formed steel members[C]//19th International Specialty Conference on Cold-Formed Steel Structures. St.Louis,Missouri,U.S.A: 2008:61-79.

相似文献/References:

[1]郝际平,刘 斌,邵大余,等.冷弯薄壁型钢结构体系中自攻螺钉连接的抗剪性能试验研究[J].西安建筑科技大学学报(自然科学版),2014,46(06):769.[doi:10.15986/j.1006-7930.2014.06.001]
 HAO Jiping,LIU Bin,SHAO Dayu,et al.Experimental study on shear behavior of screw connections in cold-formed thin-wall steel structures[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2014,46(02):769.[doi:10.15986/j.1006-7930.2014.06.001]
[2]王 朋,丁耀宗,史庆轩,等.基于统一强度理论的FRP-混凝土-钢管组合圆柱轴压承载力计算[J].西安建筑科技大学学报(自然科学版),2020,52(02):233.[doi:10.15986/j.1006-7930.2020.02.012]
 WANG Peng,DING Yaozong,SHI Qingxuan,et al.Calculation of axial bearing capacity of FRP-concrete-steel tube circular composite column based on the twin shear unified strength theory[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2020,52(02):233.[doi:10.15986/j.1006-7930.2020.02.012]
[3]谢洪平,贾振宏,韩 超,等.环状钢骨-钢管混凝土柱轴压性能试验研究[J].西安建筑科技大学学报(自然科学版),2022,54(04):524.[doi:10.15986/j.1006-7930.2022.04.007]
 XIE Hongping,JIA Zhenhong,HAN Chao,et al.Experimental study on the axial compressive bearing capacity of concrete-filled steel tubular stub column reinforced with annular steel[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2022,54(02):524.[doi:10.15986/j.1006-7930.2022.04.007]

备注/Memo

备注/Memo:
收稿日期:2019-07-13 修改稿日期:2020-03-25
基金项目:国家自然科学基金项目面上项目(51678115)
第一作者:黄丽华(1967-),女,工学硕士,教授,从事薄壁构件的稳定性研究.E-mail:lhhang@dlut.edu.cn
更新日期/Last Update: 2020-04-25