[1]忻 嘉,靳金平,杨建华,等.“华龙一号”某核安全相关厂房基底隔震设计与分析研究[J].西安建筑科技大学学报(自然科学版),2023,55(02):255-261.[doi:10.15986/j.1006-7930.2023.02.014 ]
 XIN Jia,JIN Jinping,YANG Jianhua,et al.Design and analysis of base isolation of a nuclear safety-related plant in Hualong One[J].J. Xi'an Univ. of Arch. & Tech.(Natural Science Edition),2023,55(02):255-261.[doi:10.15986/j.1006-7930.2023.02.014 ]
点击复制

“华龙一号”某核安全相关厂房基底隔震设计与分析研究()
分享到:

西安建筑科技大学学报(自然科学版)[ISSN:1006-7930/CN:61-1295/TU]

卷:
55
期数:
2023年02期
页码:
255-261
栏目:
出版日期:
2023-04-28

文章信息/Info

Title:
Design and analysis of base isolation of a nuclear safety-related plant in Hualong One
文章编号:
1006-7930(2023)02-0255-07
作者:
忻 嘉靳金平杨建华隋春光王海龙
(中国核电工程有限公司 北京核工程研究设计院, 北京 100840)
Author(s):
XIN Jia JIN Jinping YANG Jianhua SUI Chunguang WANG Hailong
(China Nuclear Power Engineering Co.,Ltd., Beijing Institute of Nuclear Engineering, Beijing 100840, China)
关键词:
华龙一号 核电厂 核安全相关 基底隔震 减震效果
Keywords:
Hualong One nuclear power plant nuclear safety related base isolation damping effect
分类号:
TU4
DOI:
10.15986/j.1006-7930.2023.02.014
文献标志码:
A
摘要:
基底隔震技术是减小结构地震响应的一种有效方式.本文以“华龙一号”某核安全相关厂房为工程背景,开展基底隔震技术的工程设计与研究.本文从厂房概况、地震输入参数、基底隔震布置方案和隔震支座性能参数的确定入手,对隔震层安全性分析、隔震结构自振特性、隔震结构减震效果等方面分别进行了论述.通过分析研究发现,采用隔震技术能够有效降低结构及其附属设备的水平向地震响应,提高结构及其附属设备的抗震安全裕度,有利于高烈度地震地区核电厂的选址建设.作为国内首次将基底隔震应用于核电厂中的核安全相关厂房,本研究为后续核电厂的隔震设计与研究提供了良好的工程借鉴意义和有益的设计经验.
Abstract:
Base isolation technique is an effective way to reduce the seismic response of structures.In this paper, the engineering design and research of base isolation technology are carried out based on the engineering background of a nuclear safety-related plant in Hualong One.Starting from the determination of the general situation of the plant, the seismic input parameters, the base isolation layout scheme and the performance parameters of the isolation bearing, the safety analysis of the isolation layer, the natural vibration characteristics of the isolation structure and the damping effect of the isolation structure are discussed respectively.The analysis shows that the seismic isolation technology can effectively reduce the horizontal seismic response of the structure and its auxiliary equipment, improve the seismic safety margin of the structure and its auxiliary equipment, and is beneficial to the site construction of nuclear power plants in high-intensity earthquake areas.As the first application of base isolation in nuclear safety-related plant in China, this study provides a good engineering reference and useful design experience for subsequent nuclear power plant isolation design and research.

参考文献/References:

[1] 谢礼立,翟长海.核电工程应用隔震技术的可行性探讨 [J].地震工程与工程振动, 2012, 32(1):1-10.
XIE Lili, ZHAI Changhai.Feasibility study on application of isolation technology in nuclear power engineering[J].Earthquake engineering and Engineering Vibration, 2012, 32(2):1-10.
[2]杨青涛,魏陆顺.ANSYS软件隔震结构分析的二次开发 [J].低温建筑技术, 2012, 67(1):1-10.
YANG Qingtao, WEI Changshun.Secondary development of ANSYS software isolation structure analysis[J].Low Temperature Architecture Technology, 2012, 67(2):1-10.
[3]中国地震局. 核电厂抗震设计标准:GB 50267—2019 [S].北京:中国计划出版社, 2019.
China Seismological Bureau.Standard for seismic design of nuclear power plants: GB 50267-2019[S].Beijing: China Planning Press, 2019.
[4]国家能源局. 核电厂结构隔震设计技术规程:NB/T 20627-2021 [S].北京:中国计划出版社, 2021.
National Energy Administration.Design Criteria for Seismic Isolation of Structures in Nuclear Power Plant: NB/T 20627-2021[S].Beijing: China Planning Press, 2021.
[5]中华人民共和国住房和城乡建设部. 建筑橡胶隔震支座:JGT 118—2018 [S].北京:标准出版社, 2018.
Ministry of Housing and Urban-Rural Development of the People's Republic of China.Rubber isolation bearing for building: JGT 118—2018[S].Beijing: China Standards Press, 2018.
[6]中华人民共和国住房和城乡建设部. 建筑隔震设计标准:GB/T 51408—2021[S].北京:中国计划出版社, 2021.
Ministry of Housing and Urban-Rural Development of the People's Republic of China.Standard for seismic isolation design of buildings: GB/T 51408—2021[S].Beijing: China Planning Press, 2021.
[7]中华人民共和国住房和城乡建设部.建筑抗震设计规范(2016年版):GB 50011-2010[S].北京:中国建筑工业出版社, 2010.
Ministry of Housing and Urban-Rural Development of the People's Republic of China.Code for seismic design of buildings(2016 version): GB 50011-2010[S].Beijing: China Architecture & Building Press, 2010.

备注/Memo

备注/Memo:
收稿日期:2022-07-11修改稿日期:2023-02-23
第一作者:忻 嘉(1983—),男,硕士,高级工程师,主要从事核电厂结构设计与研究.E-mail: 601906372@qq.com
更新日期/Last Update: 2023-04-20