[1]付小超,温东辉,张文莹.开口冷弯厚壁型钢组合截面轴压构件抗震性能研究[J].西安建筑科技大学学报(自然科学版),2023,55(06):810-818.[doi:10.15986/j.1006-7930.2023.06.003]
　FU Xiaochao,WEN Donghui,ZHANG Wenying.Study on the seismic behaviors of opening cold-formed thick-walled steel built-up sections under the axial cyclic loading[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2023,55(06):810-818.[doi:10.15986/j.1006-7930.2023.06.003]
点击复制

开口冷弯厚壁型钢组合截面轴压构件抗震性能研究()
分享到：

西安建筑科技大学学报（自然科学版）[ISSN:1006-7930/CN:61-1295/TU]

卷:
55
期数:
2023年06期
页码:
810-818
栏目:
出版日期:
2023-12-28

文章信息/Info

Title:
Study on the seismic behaviors of opening cold-formed thick-walled steel built-up sections under the axial cyclic loading
文章编号:
1006-7930(2023)06-0810-09
作者:
付小超1; 温东辉2; 张文莹3
（1.上海城建职业学院 数字建造学院，上海 200438；2.太原学院 建筑与环境工程系，山西 太原 030032；3.北京工业大学 城市建设学部，北京 100124）
Author(s):
FU Xiaochao1;  WEN Donghui2;  ZHANG Wenying3
（1.Digital Construction Institute, Shanghai Urban Construction Vocational College, Shanghai 200438, China; 2.Department of Architecture and Environmental Engineering, Taiyuan University, Taiyuan 030032, China; 3.Faculty of Architecture, Civil and Transportation Engineering, Beijing University of Technology, Beijing 100124, China）
关键词:
冷弯厚壁型钢; 组合截面; 滞回; 宽厚比; 长细比
Keywords:
cold-formed thick-walled steel;  built-up sections;  hysteretic;  width-thickness ratio;  slenderness ratio
分类号:
TU391
DOI:
10.15986/j.1006-7930.2023.06.003
文献标志码:
A
摘要:
为研究开口冷弯厚壁型钢组合截面构件在轴向滞回荷载作用下的抗震性能，选取了3根由壁厚t=3 mm、8 mm冷弯单槽钢组合而成的工字形组合截面构件，对其进行轴向滞回加载试验.分析不同试验现象及破坏模式，初步讨论了长细比、宽厚比对构件抗震性能影响，并与单截构件性能对比.在与试验结果对比吻合度较好的基础上，建立精确的ANSYS有限元模型，选取不同腹板宽厚比（h/t=20~50）、不同长细比（λy=30~90）的构件进行参数化分析.研究结果表明：组合截面构件延性较单截面构件要好，失稳破坏延后；宽厚比、长细比是影响冷弯型钢抗震性能的两个主要因素，宽厚比（h/t）越大抗震性能越差，长细比（λy）越大抗震性能同样也越差，设计时应尽量避免选择长细比和宽厚比均较大的构件.
Abstract:
In order to investigate the hysteretic behaviors of opening cold-formed thick-walled steel built-up sections under the axial cyclic loading, three cold-formed steel columns were tested which the thickness of the web is 3 mm and 8 mm. On the basis of compared with the test results, a finite element method（FEM）in ANSYS was established. The influence of widththickness ratio（h/t）rang from 20 to 50 for web and slenderness ratio about the weak axis y（λy）rang from 30 to 90 of such members were investigated by FEM. Analysis results indicated that the ductility of built-up sections member is better than single section member, and the widththickness ratio and the slenderness ratio about the weak axis y are the most important factors to affect the hysteretic behaviors. So, the coldformed steels which with great width-thickness ratio（h/t）and great slenderness ratio（λy）should be avoided in designing, because they will lead to poor seismic performance.

参考文献/References:

［1］南晶晶, 凌利改, 田国平. 冷弯型钢在国内外的发展及其在建筑结构中的应用［J］. 水利与建筑工程学报, 2009, 7(2): 117-119

 NAN Jingjing, LING Ligai, TIAN Guoping. Development of cold bending steel at home and abroad and its application in construction［J］. Journal of Water Resources and Architectural Engineering, 2009, 7(2): 117-119.
［2］李元齐, 徐厚军. 我国冷弯型钢结构发展现状及展望 ［J］. 建筑结构, 2019, 49(19): 91-101.
 LI Yuanqi, XU Houjun. Research and development of cold-formed steel structures in China ［J］. Building Structure, 2019, 49(19): 91-101.
［3］湖北省发展计划委员会. 冷弯薄壁型钢结构技术规范：GB 50018—2002 ［S］. 北京: 中国计划出版社, 2002.
 Hubei Provincial Development Planning Commission. Technical code of coldformed thinwall steel structures: GB 50018—2002 ［S］. Beijing, China Plan Publishing Company, 2002.
［4］陈雪庭, 张中权. 冷弯薄壁型钢结构构件［M］. 北京：中国铁道出版社, 1990: 5-7.
 CHEN Xueting, ZHANG Zhongquan. Cold-formed thin-walled steel structures ［M］. Beijing:China Railway Publishing House, 1990: 5-7.
［5］American Iron and Steel Institute. North American specifications for the design of cold-formed steel structural members: AISI S100—2018 ［S］. Washington D. C.: American Iron and Steel Institute, 2018.
［6］Council of Standards Australia, Council of Standards New Zealand. Cold-formed steel structures: AS/NZS4600: 2005［S］. Sydney: Council of Standards Australia, 2005.
［7］Britain Standard Institute. BS EN 199316: 2006 Eurocode 3: Design of steel structures ［S］. London: Britain Standards Institute, 2006.
［8］赵一婕,张其林. 冷弯薄壁型钢组合截面构件研究现状［J］. 施工技术, 2013, 42(15): 1-8.
 ZHAO Yijie, ZHANG Qilin. State of the cold-formed thinwailed built-up section members ［J］. Construction Technology, 2013, 42(15): 1-8.
［9］郑娟, 王征明, 李振存. 冷弯薄壁型钢组合截面柱轴心受压承载力研究 ［J］. 结构工程师, 2020, 36(5): 135-144.
 ZHENG Juan, WANG Zhengming, LI Zhencun. Study on axial compression bearing capacity of cold-formed thin-walled steel composite section column［J］. Structural Engineres, 2020, 36(5): 135-144.
［10］冉红东,梁文龙. 双槽钢组合截面悬臂构件在往复弯曲下滞回性能研究［J］. 建筑结构,2016,46(7):56-63.
 RAN Hongdong, LIANG Wenlong. Hysteretic behavior study of cantilever member with double-channel steel composite section under reversed cyclic bending ［J］. Building Structure, 2016, 46(7): 56-63.
［11］YOUNG B, CHEN J. Design of cold-formed steel built-up closed sections with intermediate stiffeners ［J］．Journal of Structural Engineering：ASCE, 2008, 134(5): 727-737．
［12］WHITTLE J, RAMSEYER c．Buckling capacities of axially loaded cold-formed built-up C-channels ［J］．Thin Walled Structures, 2009, 47(2): 190-201．
［13］付小超, 李元齐, 沈祖炎. 开口冷弯厚壁型钢轴压构件抗震性能研究 ［J］. 河北工程大学学报(自然科学版), 2016, 33(3): 1-7.
 FU Xiaochao, LI Yuanqi, SHEN Zuyan. Research on the seismic behaviors of opening cold-formed thick-walled steel under the axial cyclic loading ［J］. Journal of Hebei University of Engineering (Natural Science Edition), 2016, 33(3): 1-7.
［14］LI Gongwen, LI Yuanqi. Investigation on the hysteretic behavior of axially loaded cold-formed thick-walled steel members ［J］. Structures, 2022, 38: 1411-1425.
［15］李元齐, 吴雨杭. 冷弯型钢轻钢集成体系建筑工业化建造技术发展现状与展望 ［J］. 四川建筑科学研究, 2021, 47(3): 1-19.
 LI Yuanqi, WU Yuhang. State-of-the-arts on industrialized construction technology of light-weight steel integrated buildings using cold-formed steels ［J］. Sichuan Building Science, 2021, 47(3): 1-19.
［16］中国钢铁工业协会. 通用冷弯开口型钢尺寸、外形、重量及允许偏差：GB/T 6723—2008 ［S］. 北京: 中国标准出版社, 2008.
 China Iron & Steel Association. Cold forming sectional steel-Open sectional steel for general structure-Dimensions, shape weight and permissible tolerances:GB/T 6723—2008［S］. Beijing, Standards Press of China, 2008.
［17］中华人民共和国住房和城乡建设部. 低层冷弯薄壁型钢房屋建筑技术规程：JGJ 227—2011 ［S］. 北京: 中国建筑工业出版社, 2011.
 Housing and UrbanRural Development of the People′s Republic of China. Technical specification for lowrise coldformed thinwalled steel buildings：JGJ 227—2011［S］. Beijing, China Architecture & Building Press, 2011.
［18］European Convention for Constructional Steelwork. Recommended testing procedure for assesing the hehavior of structural steel elements under cyclic poads:ECCS-45［S］.Brussels:European Convention for Constructional Steelwork,1986.
［19］FU Xiaochao, LI Yuanqi. Research on the hysteretic behaviors of cold-formed thick-walled steel columns under the axial cyclic loading ［C］//8th STESSA International Conference on Behavior of Steel Structures in Seismic Areas. Shanghai: Tongji University, 2015: 441-448.
［20］付小超. 开口冷弯厚壁型钢钢结构抗震性能研究: ［D］. 上海：同济大学，2017.
 FU Xiaochao. Research on seismic performance of open-section cold-formed thick-walled steel members ［D］. Shanghai: Tongji University, 2017.

备注/Memo

备注/Memo:
收稿日期:2022-06-30修回日期:2022-09-14
基金项目:国家自然科学基金青年项目（52008008）；上海城建职业学院校级科研项目（cjky202317）；2023年上海高校青年教师培养资助计划入选项目
第一作者:付小超（1983—），男，博士，工程师，主要研究方向为冷弯厚壁型钢结构.E-mail: fxc-nc@163.com
更新日期/Last Update: 2024-02-04