[1]段留省,陈向荣.基于FEM的足尺落地式浅圆钢筒仓静态贮料作用分析[J].西安建筑科技大学学报:自然科学版,2012,44(01):50-54.[doi:10.15986/j.1006-7930.2012.01.009]
　DUAN Liu-sheng,CHEN Xiang-rong.FEM analysis of static action exerted by stored materials in a full scale squat cylindrical steel silo with flat bottom[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2012,44(01):50-54.[doi:10.15986/j.1006-7930.2012.01.009]
点击复制

基于FEM的足尺落地式浅圆钢筒仓静态贮料作用分析()
分享到：

西安建筑科技大学学报:自然科学版[ISSN:1006-7930/CN:61-1295/TU]

卷:
44
期数:
2012年01期
页码:
50-54
栏目:
出版日期:
2012-02-29

文章信息/Info

Title:
FEM analysis of static action exerted by stored materials in a full scale squat cylindrical steel silo with flat bottom
文章编号:
1006-7930(2012)01-0055-05
作者:
段留省1; 2; 陈向荣1; 2
(1.西安建筑科技大学土木工程学院,陕西 西安 710055; 2.西部建筑科技国家重点实验室 筹 ,陕西 西安 710055)
Author(s):
DUAN Liu-sheng1; 2;  CHEN Xiang-rong1; 2
(1.School of Civil Engineering, Xian Univ. of Arch. & Tech., Xian 710055,China; 2.State Key Laboratory of Architecture Science and Technology in West China(XAUAT),Xian 710055,China)
关键词:
钢筒仓; 落地式; 静态侧压力; 贮料; 接触; FEM
Keywords:
steel silo;  flat-bottom;  static pressure;  stored material;  contact;  FEM
分类号:
TU22
DOI:
10.15986/j.1006-7930.2012.01.009
文献标志码:
A
摘要:
准确计算贮料对仓壁的作用,是大直径浅圆钢筒仓安全设计的前提.为此,采用有限单元法(FEM)对足尺落地式浅圆钢筒仓的静态贮料作用进行了数值模拟分析,包括小麦、铁矿石散粒、石英砂和水泥散料,其本构关系服从Drucker-Prager屈服非关联流动准则.采用3-D模型同时模拟了贮料和筒仓,建立考虑变形的面-面接触对,以更好地反映贮料对仓壁的静态作用.将FEM模拟值与国内外筒仓规范的计算结果进行了对比分析,并讨论了贮料力学参数的影响,表明FEM可作为一种准确、可靠的钢筒仓静态贮料作用计算工具
Abstract:
Silos design is based on accurated evaluating static action exerted by stored materials. In order to analyse the interaction between silo and stored materials in full scale squat circular steel silo with flat bottom, the finite element method(FEM)was chosen. Four kinds of stored materials are analyzed, including wheat, iron ore pellets, sand and cement. Thestored materials and silo were simulated simultaneously in three-dimensional model, assigned to the Drucker-Prager criterion of plasticity of the stored materials. For evaluating the static action reasonably, the contact pairs named surface-to-surface are selected. The results obtained from FEM were compared with ones from silo codes at home and abroad, meanwhile the influences of different parameters were also discussed. It was certified that FEM is an appropriate tool for evaluating the static action exerted by stored materials in squat circular steel silos

参考文献/References:

[1] 宋昌永.平底圆形钢筒仓稳定性设计——储料荷载[J].空间结构,2003,9(3):55-60.
SONG Chang-yong.Stability design of flat-bottom circular steel silos—silo loading[J].Spatial Structures,2003,9(3):55-60.
[2] AYUGA F,GUAITA M,AGUADO P.Static and dynamic silo loads using finite element models[J].Journal of Agricultural Engineering Research,2001(78):299-308.
[3] AYUGA F,GUAITA M,AGUADO P J,et al..Discharge and the eccentricity of the hopper influence on the silo wall pressures[J].Journal of Engineering Mechanics,2001(127):1067-1074.
[4] GUAITA M,COUTO A,Ayuga F.Numerical simulation of wall pressure during discharge of granular material from cylindrical silos with eccentric hoppers[J].Biosystems Engineering,2003(85):101-109.
[5] MARTMNEZ M A,ALFARO I,DOBLARI M.Simulation of axisymmetric discharging in metallic silos[J].Engineering Structures,2002(24):1561-1574.
[6] VIDAL P,COUTO A,AYUGA F,et al.Influence of hopper eccentricity on discharge of cylindrical mass flow silos with rigid walls[J].Journal of Engineering Mechanics,2006(132):1026-1033.
[7] VIDAL P,GGALLEGO E,GUAITA M,et al..Finite element analysis under different boundary conditions of the filling of cylindrical steel silos having an eccentric hopper[J].Journal of Constructional Steel Research,2008,64:480-492.
[8] HOLLER S,MESKOURIS K.Granular material silos under dynamic excitation:numerical simulation and experimental validation[J].Journal of Structural Engineering,2006(132):1573-1579.
[9] VIDAL P,GUAITA M,AYUGA F.Analysis of dynamic discharge pressures in cylindrical slender silos with a flat bottom or with a hopper:comparison with eurocode 1[J].Biosystems Engineering,2005,91:335-348.
[10] JUAN A,MORAN J M,GUERA M I,et al..Establishing stress state of cylindrical metal silos using finite element method:Comparison with ENV 1993[J].Thin-Walled Structures,2006,44:1192-1200.
[11] EN1991-4.European Committee for Standardization Eurocode1-Actions on structures-Part 4:Silos and tanks[J].London:British Standard Institute,2006.
[12] 中华人民共和国建设部,GB50322—2001粮食钢板筒仓设计规范[S].北京:中国计划出版社.2001.
Ministry of consturetion of P.R.China,GB50322—2001code for designing steel silos[S].Beijing:China Planning Press,2001.
[13] 苏明周,喻 岩.结构钢单向拉伸时的非线性应力应变曲线[J].西安建筑科技大学学报:自然科学版,1999,31(1):25-28.
SU Ming-zhou,YU Yan.Nonlinear tensile stress-strain curves of structural steel[J].J.Xi′an Univ.of Arch. & Tech.:Natural Science Edition,1999,31(1):25-28.
[14] MOYA F A,GUAITA M,AGUADO P.Mechanical properties of granular agricultural materials[J].Transactions of the ASAE,2002,45(5):1569-1577.
[15] CHEN J F,YU S K,OOI J Y,et al.Finite-element modeling of filling pressures in a full-scale silo[J].Journal of Engineering Mechanics,2001(127):1058-1066.
[16] GOODEY R J,BROWN C J,ROTTER J M.Verification of a 3-dimensional model for filling pressures in square thin-walled silos[J].Engineering Structures,2003(25):1773-1783.
[17] 杨代恒.钢筒仓设计研究及散料压力的数值模拟[D].杭州:浙江大学,2008.
YANG Dai-heng.Design reseach of steel silo and numerical simulation of bulk material pressure[D].Hangzhou:Zhejiang University,2008.

相似文献/References:

[1]杨应华,马 越.太阳辐射作用下钢筒仓结构温度场分析研究[J].西安建筑科技大学学报:自然科学版,2016,48(01):52.[doi:10.15986/j.1006-7930.2016.01.009]
　YANG Yinghua,MA Yue.A study on the temperature field of steel silos under solar radiation[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2016,48(01):52.[doi:10.15986/j.1006-7930.2016.01.009]

备注/Memo

备注/Memo:
收稿日期:2011-05-24 修改稿日期:2011-09-12
基金项目:国家自然科学基金资助项目(50878182)
作者简介:段留省(1985-),男,河南周口人,博士生,主要从事钢结构稳定、抗震与新型钢结构体系的研究
更新日期/Last Update: 2015-09-01