[1]王 兵,胡长明,葛召深,等.考虑初始缺陷的扣件式钢管模板支架极限承载力研究[J].西安建筑科技大学学报:自然科学版,2012,44(06):792-798.[doi:10.15986/j.1006-7930.2012.06.006]
　WANG Bing,HU Chang-ming,GE Zhao-shen,et al.Study on ultimate bearing capacity of fastener-style tubular steel false work with initial imperfection[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2012,44(06):792-798.[doi:10.15986/j.1006-7930.2012.06.006]
点击复制

考虑初始缺陷的扣件式钢管模板支架极限承载力研究()
分享到：

西安建筑科技大学学报:自然科学版[ISSN:1006-7930/CN:61-1295/TU]

卷:
44
期数:
2012年06期
页码:
792-798
栏目:
出版日期:
2012-12-31

文章信息/Info

Title:
Study on ultimate bearing capacity of fastener-style tubular steel false work with initial imperfection
文章编号:
1006-7930(2012)06-0792-07
作者:
王 兵1; 胡长明2; 葛召深3; 谭纪波1
(1.山东金柱集团有限公司,山东聊城252000;2.西安建筑科技大学,陕西西安710055; 3. 中国建筑科学研究院,北京100013)
Author(s):
WANG Bing1;  HU Chang-ming2;  GE Zhao-shen3;  TAN Ji-bo1
(1.Shandong Jinzhu Group CO., LTD, Liaocheng 252000 ,China; 2.Xian University of Architecture and Technology, Xian 710055,China; 3.China Academy of Building Research, Beijing 100013,China)
关键词:
扣件式钢管模板支架; 初始缺陷; 一致缺陷模态法; 随机缺陷模态法
Keywords:
fastener-style tubular steel falsework;  initial imperfection;  consistent mode imperfection method;  stochastic imperfection method
分类号:
TU312+.1
DOI:
10.15986/j.1006-7930.2012.06.006
文献标志码:
A
摘要:
以扣件式钢管模板支架整体稳定性试验模型为计算模型,结合材性试验和节点半刚性试验,在有限元软件ANSYS中建立了具有材料多线性随动强化和节点半刚性的整架模型.以实测缺陷为依据,对架体进行一致缺陷模态法和随机缺陷模态法的缺陷非线性稳定分析,结果证明了该有限元模型的正确性和一致缺陷模态法在分析扣件式钢管模板支架结构时的可行性,并指出扣件式钢管模板支架结构应属于缺陷敏感结构.通过对结构试验、一致缺陷模态法和随机缺陷模态法计算的结构失稳模态和荷载位移曲线的对比研究,验证了扣件式钢管模板支架结构的脆性失稳破坏特征,并得出了一些有意义的结论
Abstract:
A FEM with material multilinear kinematic hardening and node semi-rigid was established in ANSYS simulate test model of fastener-style tubular steel false work based on material characteristic and node semi-rigid experimentation. Based on the data of measured imperfection, both the consistent mode imperfection method and stochastic imperfection method were employed to analyze the stability of the imperfection model. The result proved the model’s correctness and consistent mode imperfection method’s feasibility. In analyzing the fastener-style tubular steel falsework, the paper points out that fastener-style tubular steel falsework should belong to imperfection-sensitive structure. The brittleness failure characteristic of fastener-style tubular steel falsework proved to be valid and several significant conclusion are deduced after the deformation mode and load-displacement curve of the test were analyzed consistent mode imperfection method and stochastic imperfection method all proved to be valid

参考文献/References:

[1] 糜嘉平.我国模板脚手架行业取得的成就及发展前景[J].施工技术,2009,38(4):16-18.
MI Jia-ping.Achievment and Development Prospect of Formwork and Scaffold Industry in China[J].Construction Technology,2009,38(4):16-18.
[2] 方立新,宣云干.扣式连接结构的节点半刚性模型探讨[J].江苏建筑,2008(1):24-25,35.
FANG Li-xin,XUAN Yun-gan.Study of the Mechanic Model in Semi-rigid Joist of Fastener-type Structure[J].Jiangshu construction,2008(1):24-25,35.
[3] 敖鸿斐,李国强.双排扣件式钢管脚手架整体极限承载力研究[J].力学季刊,2004,25(2):213-218
AO Hong-fei,LI Guo-qiang.Investigation of Over all Load bearing Stability Capacity of Tube-and-couple Scaffolds[J].CHINESE QUARTERLY OF MECHANICS,2004,25(2):213-218.
[4] 张卫红,刘建民,朱国卫.基于整架试验的扣件式钢管脚手架半刚性节点计算方法[J].山东建筑大学学报,2009,24(1):38-42.
ZHANG Wei-hong,LIU Jian-min,ZHU Guo-wei.A semi-rigid node calculation method for steel tubular scaffold with complete based on back-analysis of scaffold load-bearing experiments results[J].Journal of Shangdong Jianzhu University,2009,24(1):38-42.
[5] 袁雪霞,金伟良.扣件式钢管脚支架稳定承载能力研究[J].土木工程学报,2006,39(5):43-50.
YUAN Xue-xia,JIN Wei-liang.A study on the stability bearing capacity of fastener-style tubular steel formwork supports[J].China Civil Engineering Journal,2006,39(5):43-50.
[6] 陈绍蕃.钢结构设计原理[M].北京:科学出版社,2001.
CHEN Shao-fan.Design theory of steel structure[M].Beijing:Science Publishing,2001.
[7] 胡长明,葛召深.扣件式钢管模板支架静压变形特性的试验研究[J].工业建筑,2010,40(2):32-35.
HU Chang-ming,GE Zhao-shen.A study on distortion characteristic 0ffastener-style tubular steel formwork-supports under Static Compression[J].Industrial Construction,2010,40(2):32-35.
[8] 张化振.扣件式高大模板支架的节点半刚性和整体承载力研究[D].西安:西安建筑科技大学,2009.
ZHANG Hua-zhen.Semi-rigid Joint and Global Stability Capacity Research of High-formwork-supports with Couplers[D].Xi′an:Xi′an University of Architecture and Technology,2009.
[9] 沈世钊,陈 昕.网壳结构稳定性[M].北京:科学出版社,1999.
SHEN Shi-zhao,CHEN Xi.Stability of net-shell structure[M].Beijing:Science Publishing,1999.
[10] 陈 东,赵才其,王修信,等.板片空间结构的改进一致缺陷模态法[J].工业建筑,2007,37(s):504-507.
CHEN Dong,ZHAO Cai-qi,WANG Xiu-xin,et al..IMPROVED CONSISTENT IMPERFECT BUCKLING ANALYSIS METHOD FOR STABILITY ANALYSIS OF SHEET SPACE STRUCTURE[J].Industrial Construction,2007,37(s):504-507.
[11] 唐 敢,马 军,赵才其,等.板片结构稳定性分析的改进随机缺陷法[J].工业建筑,2004,34(11):10-13.
TANG Gan,MA Jun,ZHAO Cai-qi,et al.ADVANCED STOCHASTIC IMPERFECTIONS METHOD FOR STABILITY ANALYSIS OF SHEET SPACE STRUCTURE[J].Industrial Construction,2004,34(11):10-13.
[12] CEDERBAUM G,ARBOCZ J.On the reliability of imperfection-sensitive long isotropic cylindrical shells[J].Structural Safety,1996,18(1):1-9.
[13] SCHENK C A,SCHUELLER G I.Buckling analysis of cylindrical shells with random geometric imperfections[J].International Journal of Non-linear Mechanics,2003,38(7):1119-1132.
[14] OYESANYA M O.Influence of extra terms on asymptotic analysis of imperfection sensitivity of toroidal shell segment with random imperfection[J].Mechanics Research Communications,2005,32(4):444-453.
[15] 尹凌峰,黎德林,赵惠麟.基于缺陷分布变离散度空间网格的结构稳定性[J].东南大学学报:自然科学版,2007,37(6):1013-1017.
YIN Ling-feng,LI De-lin,ZHAO Hui-lin.Stability of spatial grid structure based on variable discrete degree of inperfection distribution.[J].Journal of Southeast University:Natural Science Edition,2007,37(6):1013-1017.
[16] 胡长明.扣件联接钢结构试验及其理论研究[D].西安:西安建筑科技大学,2008.
HU Chang-ming.Studies on Experiment and Theory of Steel Construetion Connected with Fasteners[D].Xi′an:Xi′an University of Architecture and Technology,2008.

相似文献/References:

[1]郝际平,袁昌鲁,钟炜辉.考虑支座转动约束作用三管梭形钢格构柱的稳定性研究[J].西安建筑科技大学学报:自然科学版,2013,45(04):457.[doi:10.15986/j.1006-7930.2013.04.001]
　HAO Ji-ping,YUAN Chang-lu,ZHONG Wei-hui.Research on stability of the 3-pipe shuttle-shaped steel latticed column with end restraints[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2013,45(06):457.[doi:10.15986/j.1006-7930.2013.04.001]
[2]赵　海１,白国良１,徐亚洲１,等.初始缺陷对超大型双曲冷却塔极限承载力的影响[J].西安建筑科技大学学报:自然科学版,2011,43(06):777.[doi:DOI:10.15986/j.1006-7930.2011.06.014]
　,,et al.Ｔｈｅ　ｉｎｆｌｕｅｎｃｅ　ｏｆ　ｉｎｉｔｉａｌ　ｉｍｐｅｒｆｅｃｔｉｏｎｓ　ｏｎ　ｔｈｅ　ｕｌｔｉｍａｔｅ　ｂｅａｒｉｎｇｃａｐａｃｉｔｙ　ｏｆ　ｓｕｐｅｒ－ｌａｒｇｅ　ｈｙｐｅｒｂｏｌｉｃ　ｃｏｏｌｉｎｇ　ｔｏｗｅｒｓ[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2011,43(06):777.[doi:DOI:10.15986/j.1006-7930.2011.06.014]

备注/Memo

备注/Memo:
收稿日期:2012-03-19 修改稿日期:2012-11-28
基金项目:国家自然科学基金面上项目(50978219)
作者简介:王 兵(1981-),男,山东聊城人,工程师,主要从事土木工程施工技术研究.
更新日期/Last Update: 2015-09-01