[1]马尤苏夫,王先铁,刘立达,等.方钢管混凝土框架内置开洞薄钢板剪力墙抗震性能试验研究[J].西安建筑科技大学学报(自然科学版),2016,48(05):681-690.[doi:10.15986/j.1006-7930.2016.05.011]
　MA Yousufu,WANG Xiantie,LIU Lida,et al.Study on the seismic behavior of concrete-filled square steel tubular frame-thin steel plate shear wall with openings[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2016,48(05):681-690.[doi:10.15986/j.1006-7930.2016.05.011]
点击复制

方钢管混凝土框架内置开洞薄钢板剪力墙抗震性能试验研究()
分享到：

西安建筑科技大学学报（自然科学版）[ISSN:1006-7930/CN:61-1295/TU]

卷:
48
期数:
2016年05期
页码:
681-690
栏目:
出版日期:
2016-10-31

文章信息/Info

Title:
Study on the seismic behavior of concrete-filled square steel tubular frame-thin steel plate shear wall with openings
文章编号:
1006-7930(2016)05-0681-10
作者:
马尤苏夫1; 王先铁2; 刘立达2; 贺 博2
(1. 西安科技大学建筑与土木工程学院,陕西 西安 710054;2. 西安建筑科技大学土木工程学院,陕西 西安 710055)
Author(s):
MA Yousufu1;  WANG Xiantie2;  LIU Lida2;  HE Bo2
(1. School of Architecture and Civil Engineering, Xian University of Science and Technology, Xian 710054, China; 2. School of Civil Engineering, Xian University of Architecture and Technology, Xian 710055, China)
关键词:
方钢管混凝土框架; 开洞薄钢板剪力墙; 抗震性能; 试验研究
Keywords:
concrete-filled square steel tubular frame;  steel plate shear wall with opening;  seismic behavior;  experimental study
分类号:
TU 398.2
DOI:
10.15986/j.1006-7930.2016.05.011
文献标志码:
A
摘要:
为研究方钢管混凝土框架内置开洞薄钢板剪力墙的抗震性能，对4个单跨2层1/3比例的方钢管混凝土框架内置薄钢板剪力墙试件进行了低周反复荷载试验，4个试件分别采用中部开洞、单侧开洞、两侧开洞和未开洞钢板剪力墙．研究了开洞形式对方钢管混凝土框架内置薄钢板剪力墙抗震性能的影响，并与方钢管混凝土框架内置未开洞薄钢板剪力墙进行对比．得到了试件的滞回曲线、骨架曲线、各阶段的荷载和位移值及抗震性能指标，分析了结构的破坏特征、延性、耗能能力、承载能力及刚度退化等力学性能．结果表明：4个试件均能够发挥钢板剪力墙的屈曲后强度，滞回性能稳定，延性较好，承载力退化平缓．中部开洞薄钢板剪力墙被加劲肋分隔为宽厚比较小的区格，耗能能力优于其余3个试件．洞口边缘构件端部连接焊缝撕裂影响了单侧开洞和两侧开洞钢板剪力墙性能的充分发挥．钢板剪力墙开洞一定程度上降低了结构承载力和抗侧刚度，但提高了耗能能力．钢板剪力墙洞口边缘构件应具有足够的强度、刚度及连接强度．
Abstract:
In order to study the seismic behavior of the concrete-filled square steel tubular frame(CFSST)-thin steel shear plate walls(SPSWs) with openings, four one-third scaled one-bay and two-story CFSST-SPSWs specimens were designed for quasi-static experiments. The SPSWs of specimens were with middle openings, one side opening, two side openings and with no opening, separately. The influences of opening on the seismic behavior of SPSWs were investigated for CFSST-SPSWs, which were compared with the CFSST-SPSWs without opening. The hysteretic loops, skeleton curves, the load and displacement values for different loading stages and seismic behavior index were obtained. The failure characteristic, ductility, energy dissipation capacity, load bearing and stiffness degradation were studied. The results show that the post-buckling strength of the SPSWs of four specimens is developed. All the specimens have stable hysteretic behavior, good ductility and stable load bearing capacity degradation. The SPSWs with middle openings are divided into small zone with smaller width-to-thickness ratio by stiffeners. The energy dissipation capacity of the SPSWs with middle openings is better than the others’. The load bearing capacity of SPSW with one side and two side opening is affected by the weld tearing of the stiffeners surrounding the openings. The openings of the SPSWs decrease the load bearing capacity and lateral stiffness, but improve the energy dissipation. The strength, stiffness and the connection of the stiffeners surrounding the openings should be adequate in develop ing the tension field.

参考文献/References:

[1] 郭彦林, 董全利. 钢板剪力墙的发展与现状研究[J]. 钢结构, 2005, 20(77): 1-6.

GUO Yanlin, DONG Quanli. Research and application of steel plate shear wall in high-rise building[J]. Steel Construction, 2005, 20(77): 1-6.

[2] THORBUM L J, KULAK G L, MONTGOMERY C J. Analysis of steel plate share walls[R]. Alberta, Canada: University of Alberta, 1983.

[3] 李峰, 李慧, 李振敏, 等. 交叉加劲肋钢板剪力墙低周反复荷载试验研究[J]. 西安建筑科技大学学报(自然科学版), 2009, 41(1): 57-62.

LI Feng, LI Hui, LI Zhenmin, et al. Cyclic test of diagonally stiffened steel plate shear wall[J]. J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition), 2009, 41(1): 57-62.

[4] 韩林海. 钢管混凝土结构[M]. 北京: 科学出版社, 2000.

HAN Linhai. Concrete-filled square steel tube structurer[M]. Beijing: Science Press, 2000.

[5] KAWAGUCHI J, MORINO S, SUGIMOTO T, et al. Experimental study on structural characteristics of portal frames consisting of square CFT columns[C]// Proceedings of the Conference Composite Construction in Steel and Concrete IV. Canada: American Society of Civil Engineers, 2002: 1503-1511.

[6] 王先铁, 郝际平, 周观根, 等. 方钢管混凝土柱-钢梁平面框架抗震性能试验研究[J]. 建筑结构学报, 2010, 31(8): 8-14.

WANG Xiantie, HAO Jiping, ZHOU Guangen, et al. Experimental research on seismic behavior of concrete-filled square steel tube columns and steel beam planar frames[J]. Journal of Building Structures, 2010, 31(8): 8-14.

[7] TOKO H, CHIAKI M. Experimental study on steel shear wall with slits[J]. Journal of Structural Engineering, 2003, 129(5): 586-595.

[8] CHOI I R, PARK H G. Steel plate shear walls with various infill plate designs[J]. Journal of Structural Engineering, 2009, 135(7): 785-796.

[9] 聂建国, 朱力, 樊健生, 等. 钢板剪力墙抗震性能试验研究[J]. 建筑结构学报, 2013, 34(1): 61-69.

NIE Jianguo, ZHU Li, FAN Jiansheng, et al. Experimental research on seismic behavior of steel plate shear walls[J]. Journal of Building Structure, 2013, 34(1): 61-69.

[10] 聂建国, 朱力, 樊健生, 等. 开洞加劲钢板剪力墙的抗侧承载力分析[J]. 建筑结构学报, 2013, 34(7): 79-88.

NIE Jianguo, ZHU Li, FAN Jiansheng, et al. Lateral force resistant capacity of stiffened steel plate shear walls with openings[J]. Journal of Building Structure, 2013, 34(7): 79-88.

[11] 朱力, 聂建国, 樊健生. 开洞加劲钢板剪力墙的抗侧刚度分析[J]. 工程力学, 2013, 30(9): 200-210.

ZHU Li, NIE Jianguo, FAN Jiansheng. Lateral stiffness of steel plate shear walls with openings[J]. Engineering Mechanics, 2013, 30(9): 200-263.

[12] 郝际平, 曹春华, 王迎春, 等. 开洞薄钢板剪力墙低周反复荷载试验研究[J]. 地震工程与工程振动, 2009, 29(2): 79-85.

HAO Jiping, CAO Chunhua, WANG yingchun, et al. Test On thin steel plate shear wall with opening under cyclic loading[J]. Journal of Earthquake Engineering and Engineering Vibration, 2009, 29(2): 79-85.

[13] 李峰. 钢板剪力墙抗震性能的试验与理论研究[D]. 西安: 西安建筑科技大学, 2011.

LI Feng. Experimental and theoretical investigation to earthquake resistant behavior of steel plate shear walls[D]. Xi’an: Xi’an Univ. of Arch. & Tech., 2011.

[14] AISC. Seismic provisions for structural steel buildings : ANSI/AISC 341-10 [S]. Chicago, USA: American Institute of Steel Construction, 2010.

[15] 童根树, 陶文登. 竖向槽钢加劲钢板剪力墙剪切屈曲[J]. 工程力学, 2013, 30(9): 1-9.

TONG Genshu, TAO Wendeng. Elastic shear buckling of shear walls strengthened vertically by closed section stiffeners[J]. Engineering Mechanics, 2013, 30(9): 1-9.

[16] 王先铁, 马尤苏夫, 郝际平, 等. 钢板剪力墙边缘构件的计算方法研究[J]. 工程力学, 2014, 31(8): 175-182.

WANG Xiantie, MA Yousufu, HAO Jiping, et al. Calculation methods for boundary elements in steel plate shear walls[J]. Engineering Mechanics, 2014, 31(8): 175-182.

[17] 中华人民共和国住房和城乡建设部. 建筑抗震试验规程: JGJ/T 101-2015[S]. 北京: 中国建筑工业出版社, 2015.

Ministry of housing and urban-rural development of the People’s Republic of China. Specification for seismic test of buildings: JGJ/T 101-2015[S]. Beijing: China Architecture & Building Press, 2015.

[18] 熊仲明, 王社良. 土木工程结构试验[M]. 北京: 中国建筑工业出版社, 2006.
XIONG Zhongming, WANG Sheliang. Structure test of civil engineering[M]. Beijing: China Architecture & Building Press, 2006.

[19] 姚振纲, 刘祖华. 建筑结构试验[M]. 上海: 同济大学出版社, 1996.

YAO Zhengang, LIU Zuhua. Test of building structure[M]. Shanghai: Tongji University Press, 1996.

[20] 王先铁, 白连平, 王连坤, 等. 方钢管混凝土框架-十字加劲薄钢板剪力墙的力学性能研究[J]. 地震工程与工程震动, 2013, 33(2): 103-109.

WANG Xiantie, BAI Lianping, WANG Liankun, et al. Study on mechanical behavior of concrete-filled square steel tubular frame-cross-stiffened thin steel plate shear walls[J]. Journal of Earthquake Engineering and Engineering Vibration, 2013, 33(2): 103-109.

相似文献/References:

[1]王先铁,王东石,李海广,等.方钢管混凝土框架-单侧开洞薄钢板剪力墙滞回性能研究[J].西安建筑科技大学学报(自然科学版),2015,47(03):333.[doi:10.15986/j.1006-7930.2015.03.005]
　WANG Xiantie,WANG Dongshi,LI Haiguang,et al.Research on the hysteretic behavior of concrete-filled square steel tubular frame-thin steel plate shear walls with side opening[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2015,47(05):333.[doi:10.15986/j.1006-7930.2015.03.005]
[2]王先铁,杨航东,王连坤,等.方钢管混凝土框架-两边连接薄钢板剪力墙 力学性能研究[J].西安建筑科技大学学报(自然科学版),2014,46(05):665.[doi:10.15986/j.1006-7930.2004.05.008]
　WANG Xiantie,YANG Hangdong,WANG Liankun,et al.Mechanical behavior study of concrete-filled square steel tubular frame-thin steel plate shear walls with two-side connections[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2014,46(05):665.[doi:10.15986/j.1006-7930.2004.05.008]
[3]王先铁,刘立达,高娅静,等.方钢管混凝土框架-斜加劲薄钢板剪力墙的抗震性能试验研究[J].西安建筑科技大学学报(自然科学版),2015,47(04):503.[doi:10.15986/j.1006-7930.2015.04.008]
　WANG Xiantie,LIU Lida,GAO Yajing,et al.Study on the seismic behavior of concrete-filled square steel tubular frame-thin steel plate shear walls with diagonal stiffeners[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2015,47(05):503.[doi:10.15986/j.1006-7930.2015.04.008]
[4]王先铁,储召文,杨航东,等.方钢管混凝土框架-两侧开洞薄钢板剪力墙的力学性能研究[J].西安建筑科技大学学报(自然科学版),2015,47(05):635.[doi:DOI: 10.15986/j.1006-7930.2015.05.005]
　WANG Xiantie,CHU Zhaowen,YANG Hangdong,et al.Study on the mechanical behavior of concrete-filled square steel tubularframe-thin steel plate shear walls with bilateral openings[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2015,47(05):635.[doi:DOI: 10.15986/j.1006-7930.2015.05.005]
[5]王先铁,周绪红,宋文俊,等.方钢管混凝土框架-斜十字加劲薄钢板剪力墙低周反复荷载试验研究[J].西安建筑科技大学学报(自然科学版),2016,48(01):63.[doi:10.15986/j.1006-7930.2016.01.011]
　WANG Xiantie,ZHOU Xuhong,SONG Wenjun,et al.Cyclic loading test study on concrete-filled square steel tubular frame-diagonally cross stiffened thin steel plate shear walls[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2016,48(05):63.[doi:10.15986/j.1006-7930.2016.01.011]
[6]王先铁,周绪红,储召文,等.方钢管混凝土框架内置侧边开洞薄钢板剪力墙的抗侧承载力研究[J].西安建筑科技大学学报(自然科学版),2017,49(03):350.[doi:10.15986/j.1006-7930.2017.03.007]
　WANG Xiantie,ZHOU Xuhong,CHU Zhaowen,et al.Study on lateral resistance capacity of concrete-filled square steel tubular frame-thin steel plate shear wall with side opening[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2017,49(05):350.[doi:10.15986/j.1006-7930.2017.03.007]

备注/Memo

备注/Memo:
基金项目：国家自然科学基金项目资助(51108369)；2015年西安市建设科技计划项目(SJW2015-12)
收稿日期：2016-01-08 修改稿日期：2016-10-12
作者简介：马尤苏夫(1987－)，男，博士，讲师，主要从事钢结构和组合结构研究．E-mail: yusuf@126.com
更新日期/Last Update: 2016-11-24