[1]陈向荣,陈 星.单轴对称圆孔蜂窝梁弯扭屈曲承载力的简化计算[J].西安建筑科技大学学报：自然版,2015,47(05):649-654.[doi:DOI：10.15986/j.1006-7930.2015.05.007]
　CHEN Xiangrong,CHEN Xing.Simplified calculation on lateral buckling resistance of monosymmetric cellular beam[J].J.Xi’an Univ. of Arch. & Tech.：Natural Science Edition,2015,47(05):649-654.[doi:DOI：10.15986/j.1006-7930.2015.05.007]
点击复制

单轴对称圆孔蜂窝梁弯扭屈曲承载力的简化计算()
分享到：

西安建筑科技大学学报：自然版[ISSN:1006-7930/CN:61-1295/TU]

卷:
47
期数:
2015年05期
页码:
649-654
栏目:
出版日期:
2015-10-29

文章信息/Info

Title:
Simplified calculation on lateral buckling resistance of monosymmetric cellular beam
文章编号:
1006-7930(2015)05-0649-06
作者:
陈向荣; 陈 星
(西安建筑科技大学土木工程学院,陕西 西安710055)
Author(s):
CHEN Xiangrong;  CHEN Xing
(School of Civil Engineering, Xi’an Univ. of Arch. & Tech., Xi’an 710055, China)
关键词:
蜂窝梁; 单轴对称; 弯扭屈曲; 残余应力; 非线性回归分析
Keywords:
cellular beam;  monosymmetric;  lateral buckling;  residual stress;  nonlinear regression analysis
分类号:
TU392.1
DOI:
DOI：10.15986/j.1006-7930.2015.05.007
文献标志码:
A
摘要:
对存在初始缺陷的单轴对称圆孔蜂窝梁的弯扭屈曲整体稳定性能进行参数研究，提出新的简化设计方法．通过ANSYS建立有限元模型，在与国外试验数据差距较小的基础上，分析不同孔高比、距高比及跨高比的单轴对称圆孔蜂窝梁中残余应力的影响程度及规律，并将各构件稳定承载力与规范公式所得当量单轴对称实腹梁的稳定承载力比较，发现跨高比与残余应力对稳定承载力的影响程度成正比；距高比、跨高比不同的单轴对称圆孔蜂窝梁与规范所得实腹梁的稳定承载力具有某种特定联系；提出单轴对称圆孔蜂窝梁稳定承载力折减系数，通过非线性回归分析得到稳定承载力简化计算公式．经有限元验证，对于任意参数的单轴对称圆孔蜂窝梁，此公式均能精确、快速地算得稳定承载力，在设计中可参考使用以提高设计效率．
Abstract:
Lateral buckling resistance of monosymmetric cellular beams(MCB) is the focus of this research. Comparing with experiment results, FEM models were established with ANSYS to analyze the rule and degree to which residual stress affects lateral buckling resistance of MCBs with varied span, opening rate and pitch of holes. Obtained resistances of MCBs were contrasted with the ones of equivalent solid webbed beams(ESBs). It is found that the Length-Height Ratio is proportional to extend of residual stress impact of lateral buckling resistances. Moreover, there is a connection between the lateral buckling resistance of ESBs and the ones of MCBs with varied Pitch-Height Ratio and Length-Height Ratio. After nonlinear regression analysis, the reduction factor and a new simplified calculation are proposed. Identification shows that the calculation could figure out lateral buckling resistance of MCBs with random parameters in a correct and rapid way. Consider ed these, the simplified calculation could be applied to designing.

参考文献/References:

参考文献 References
[1] LIU T CH, CHUNG K F．Steel beams with large web
openings of various shapes and sizes finite element investigation[
J]．Journal of Constructional Steel Research, 2001,
57(1): 1159 -1176．
[2] 陈绍蕃．单轴对称工形截面无支撑简支梁的稳定承载能
力[J]． 钢结构, 2008, 23(08): 14-19．
CHEN Shaofan. Buckling capacity of unbraced simplysupported
beams with monosymmetric I-section[J]. Steel
Structure, 2008, 23(08): 14-19.
[3] SRITAWAT KITIPORNCHAI, ALAIN D. Wong Chung.
Inelastic buckling of welded monosymmetric I-beams[J].
Journal of Structural Engineering, 1987, 113(4): 740-756.
[4] SWEEDAN, AMR M I. Elastic lateral stability of
I-shaped cellular steel beams[J]. Journal of Constructional
Steel Research, 2011, 67(2): 151-163.
[5] 陈骥．钢结构稳定理论与设计[M]．第5 版．北京: 科
学出版社, 2011．
CHEN Ji. Stability theory and design of steel construction[
M]. 5th. ed. Beijing: Science Press, 2011.
[6] 张壮南, 张耀春．残余应力对单轴对称工字梁稳定承载
力的影响[J]．哈尔滨工业大学学报, 2007, 39(12):
1864-1868．
ZHANG Zhuangnan, ZHANG Yaochun. Effects of welding
residual stresses on the stability capacity of the
monosymmetric I-beams[J]. Journal of Harbin Institute of
Technology, 2007, 39(12): 1864-1868.
[7] 张利若, 陈绍蕃, 顾强．工形截面纯弯曲梁翼缘腹板的
相关屈曲[J]．西安建筑科技大学学报:自然科学版,
1996,28(4):86-91．
ZHANG Liruo, CHEN Shaofan, GU Qiang. Interaction of
local buckling in welded I-section steel beams[J]. J. Xi’an
Univ. of Arch. & Tech. (Natural Science Edition), 1996,
28(4): 86-91.
[8] FU dingfa, ZHOU changqing, LI can. Effect of welding
sequence on residual stress in thin-walled octagonal
pipe−plate structure[J]. Transactions of Nonferrous Metals
Society of China, 2014, 24(3): 657-664.
[9] DELPHINE S, JAN B. Lateral–torsional buckling resistance
of cellular beams[J]. Journal of Constructional
Steel Research, 2015, 105(10): 119-128.
[10] 中华人民共和国建设部. GB50017-2003 钢结构设计规
范[S]. 北京: 中国计划出版社, 2003.
Ministry of Development of the People’s Republic of
China.GB50017-2003 Code for design of steel structures[
S]. Beijing: China Planning Press, 2003.

备注/Memo

备注/Memo:
收稿日期：2015-05-29 修改稿日期：2015-10-12
基金项目：国家自然科学青年基金项目资助（51208412）；住房和城乡建设部科学基金资助（2014-k2-015）；陕西省教育厅重点实验室资助项目（15JS049）
作者简介：陈向荣（1972-），女，副教授，硕导，主要从事钢结构理论与钢结构稳定研究． E-mail:cxr90@126.com
更新日期/Last Update: 2015-12-14