[1]侯炜 陈彬 蔡振玲 郭子熊.一种新型连梁拟静力加载方案及其试验验证[J].西安建筑科技大学学报(自然科学版),2017,49(02):207-214.[doi:10.15986/j.1003-7930.2017.02.008]
 HOU Wei,CHEN Bin,CHAI Zhenlin,et al.A new pseudo-static loading program of coupling beams and its test verification[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2017,49(02):207-214.[doi:10.15986/j.1003-7930.2017.02.008]
点击复制

一种新型连梁拟静力加载方案及其试验验证()
分享到:

西安建筑科技大学学报(自然科学版)[ISSN:1006-7930/CN:61-1295/TU]

卷:
49
期数:
2017年02期
页码:
207-214
栏目:
出版日期:
2017-04-28

文章信息/Info

Title:
A new pseudo-static loading program of coupling beams and its test verification
文章编号:
1006-7930(2017)02-0207-08
作者:
侯炜12 陈彬12 蔡振玲12 郭子熊12
(1.华侨大学土木工程学院,福建 厦门 361021 ;2. 福建省结构工程与防灾重点实验室,福建 厦门 361021 )
Author(s):
HOU Wei12 CHEN Bin 1 CHAI Zhenlin 12 GUO Zixiong12
(1. School of Civil Engineering, Huaqiao University, Xiamen 361021, China; 2. Key Laboratory for Structure Engineering and Disaster Prevention of Fujian Province, Xiamen 361021, China)
关键词:
连梁边界条件拟静力试验加载装置
Keywords:
coupling beam boundary condition pseudo-static test loading device
分类号:
TU398
DOI:
10.15986/j.1003-7930.2017.02.008
文献标志码:
A
摘要:
连梁作为剪力墙结构和核心筒的重要耗能构件,在房屋抵抗地震中起到第一道防线的作用。由于模拟连梁真实的边界条件和受力状态较难实现,所以连梁低周反复加载试验成为最难的结构试验之一。针对实现试件平动以及对中加载等问题,各国学者也提出了不同的加载方案。本文首先对已有加载方案和试验装置进行综述,借此考察和分析现有试验条件的优缺点,并自行加工制作了一套可实现连梁边界条件和受力形式的加载装置。该加载装置在试件一侧布置两个竖向作动器从而能够保证连梁保持上下转角一致,并监控作动器受力情况,结果表明两个竖向加载器对试验的受力影响较小。通过对内嵌钢板混凝土组合连梁的低周反复荷载试验,验证了该加载装置的可行性和适用性,试验结果达到预期目标,数据可靠,该试验方案可供选择使用。
Abstract:
As an important energy dissipation component of coupling shear wall system and core tube, the coupling beam played the first seismic line function in the building. Simulating the real boundary condition and the stress state of the coupling beam is difficult to accomplish, so the reversed cyclic loads test of the coupling beam is to become the one of the most difficult structural tests. Scholars of different countries have put forward different loading method to the issues such as the specimen keeps horizontal, align to load and so on. This paper summarizes the previous loading method and test device, and takes the investigation and analysis of the advantages and disadvantages of previous tests , then designed and manufactured a suitable loading device to realize the boundary condition of the coupling beam. Loading device installed at both sides of the two vertical actuator to ensure the both side of the coupling beam to keep some angle. Load of the vertical actuator is recorded in the process, and analyze the change of loading. Two vertical actors have less influence on the force of test. The reversed cyclic loading test of embedded steel plate reinforced concrete coupling beams was conducted using this loading program. The feasibility and applicability of the loading device are proved . T he test results is shown that the loading device can achieve the expected goal and that the data are reliable. The new loading program is an alternative program

参考文献/References:

Reference s

[1] KWAN A K H , ZHAO Z Z. Testing of coupling beams with equal end rotations maintained and local joint deformation allowed [J]. Structures & Buildings, 2002, 152(1):67-78.

[2] TEGOS I A, PENELIS G G. Seismic resistance of short columns and coupling beams reinforced with inclined bars [J]. Aci Structural Journal, 1988, 85(1):82-88.

[3] BARNEY G. B, SHIU K. N, RABBAT B G, et al. Earthquake resistance structure walls – test of coupling beams [R]. Skokie, Illinois:Portland Cement Association,1975

[4] CIUHANDU G C, TUDOR D . The effect of the restraint shrinkage on the behavior of coupling beams of shear walls, subjected to horizontal alternating loading in duma [C] //Proceedings of the 10th European conference on earthquake engineering. Vienna, Austria:1994

[5] PAULAY T , BINNY J R . Diagonally reinforced coupling beams of shear walls [J]. American Concrete Institute, Special publication, Farmington Hills, 1974, 42:579-598

[6] GALANO L, VIGNOLI A. Seismic behavior of short coupling beams with different reinforcement layouts [J]. Aci Structural Journal, 2000, 97(6):876-885.

[7] GONG B, SHAHROOZ B M. Concrete- steel composite coupling beams. I: component testing [J]. Journal of Structural Engineering, 2001, 127(6):625-631.

[8] HARRIES K A, MITCHELL D, COOK W D , et al. Seismic response of steel beams coupling concrete walls [J]. Journal of Structural Engineering, 1993, 119(12):3611-3629.

[9] PARK W S, YUN H D. Seismic behaviour of coupling beams in a hybrid coupled shear walls [J]. Journal of Constructional Steel Research, 2005, 61(11):1492-1524.

[10] TASSIOS T P, MORETTI M, BEZAS A. On the behavior and ductility of reinforced concrete coupling beams of shear walls [J]. Aci Structural Journal, 1996, 93(6):711-720.

[11] 傅剑平,皮天祥,韦锋,等. 钢筋混凝土联肢墙小跨高比复合斜筋连梁抗震性能试验研究[J]. 土木工程学报, 2011, 2(4): 57-64.

FU Jianping, PI Tianxiang, Wei Feng, et al. Experimental study on seismic behaviors of small-aspect-ratio coupling beams in RC structure walls proportioned with combined slanting reinforcements [J]. China Civil Engineering Journal, 2011, 2(4):57-64.

[12] 皮天祥. 钢筋混凝土剪力墙小跨高比连梁抗震性能试验和设计方法研究[D].重庆:重庆大学, 2008.

PI Tianxiang. Experimental study on seismic behavior and design method study of small span-to-depth ratio coupling beams of seismic RC shear walls [D]. Chongqing: Chongqing University, 2008.

[13] Li X, LV H L, ZHANG G C, et al. Seismic behavior of replaceable steel truss coupling beams with buckling restrained webs [J]. Journal of Constructional Steel Research, 2015(104):167-176.

[14] HALIM T. cyclic behaviors of reinforced concrete coupling beams with and without axial restraint [D]. Taiwan: National Taiwan University of Science and Technology , 2012.

[15] 张刚. 钢板混凝土连梁抗震性能的试验研究[D]. 北京: 清华大学, 2005

ZHANG Gang. Experimental study on seismic behavior of steel plate reinforced concrete coupling beams [D]. Beijing: Tsinghua University, 2005 .

[16] SU R K L, LAM W Y, PAM H J. Experimental study of plate ‐reinforced composite deep coupling beams [J]. Structural Design of Tall & Special Buildings, 2009, 18(3):235-257.

[17] 张兴虎,赵建德,史庆轩,等, 一种多功能拟静力试验装置. 结构工程师, 2011, 27(S1): 249-254.

ZHANG Xinghu, ZHAO jiande, SHI Qingxuan, et al. A multifunction pseudo-static test device [J]. Structural Engineers, 2011, 27(S1): 249-254.

[18] SANG W H, CHANG S L, SHIN M, et al. Cyclic performance of precast coupling beams with bundled diagonal reinforcement [J]. Engineering Structures, 2015(93):142-151.

[19] 侯炜,陈彬,郭子雄等. 内嵌钢板混凝土组合连梁抗震性能试验研究[J]. 土木工程学报, 2017, 50(2): 9-18.

相似文献/References:

[1]李 亮,李国强.轴向均布荷载下弯剪型竖向悬臂杆的屈曲临界荷载简化算法[J].西安建筑科技大学学报(自然科学版),2013,45(06):817.[doi:10.15986/j.1006-7930.2013.06.011]
 LI Liang,LI Guo-qiang.Simplified algorithm of buckling critical load for shear-bending cantilever rounder axially uniformly distributed load[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2013,45(02):817.[doi:10.15986/j.1006-7930.2013.06.011]
[2]康亚明,贾延,罗玉财,等.三轴压缩时岩石破裂面方位角理论值与实验值研究[J].西安建筑科技大学学报(自然科学版),2017,49(05):665.[doi:10.15986/j.1006-7930.2017.05.008]
 KANG Yaming,JIA Yan,LUO Yucai,et al.Research on the heoretical and experimental value of azimuth angle of the fracture surface for the rock subjected to triaxial Compression[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2017,49(02):665.[doi:10.15986/j.1006-7930.2017.05.008]
[3]康亚明,贾 延,罗玉财.立方体测混凝土抗压强度时的破裂形态与机制[J].西安建筑科技大学学报(自然科学版),2018,50(02):202.
 KANG Yaming,JIA Yan,LUO Yucai.Fracture morphology and mechanism of concrete cube test blocks subjected to compression failure[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2018,50(02):202.

更新日期/Last Update: 2017-06-09