[1]史晓鹏,程 欣.薄柔H形截面钢构件短柱轴压试验研究[J].西安建筑科技大学学报(自然科学版),2022,54(05):675-683.[doi:10.15986/j.1006-7930.2022.05.005 ]
 SHI Xiaopeng,CHENG Xin.Experimental study on slender H-section steel stub columns under axial compression[J].J. Xi'an Univ. of Arch. & Tech.(Natural Science Edition),2022,54(05):675-683.[doi:10.15986/j.1006-7930.2022.05.005 ]
点击复制

薄柔H形截面钢构件短柱轴压试验研究()
分享到:

西安建筑科技大学学报(自然科学版)[ISSN:1006-7930/CN:61-1295/TU]

卷:
54
期数:
2022年05期
页码:
675-683
栏目:
出版日期:
2022-10-28

文章信息/Info

Title:
Experimental study on slender H-section steel stub columns under axial compression
文章编号:
1006-7930(2022)05-0675-09
作者:
史晓鹏程 欣
(太原理工大学 土木工程学院,山西 太原 030024)
Author(s):
SHI Xiaopeng CHENG Xin
(College of Civil Engineering, Taiyuan University of Technology, Taiyuan 030024, China)
关键词:
H形截面钢构件 轴压 局部屈曲 板件相关作用 极限承载力
Keywords:
H-section steel members axial pressure local buckling plate interaction ultimate bearing capacity
分类号:
TU391
DOI:
10.15986/j.1006-7930.2022.05.005
文献标志码:
A
摘要:
随着轻钢结构的推广与应用,具有良好经济效益和环保性能的薄柔H形截面钢构件在轻量化低多层钢框架体系中的应用受到广泛关注.为研究薄柔H形截面钢构件的轴向力学性能,以宽厚比作为主要控制参数调整板件的相对强弱关系,采用Q355B钢材设计制作了6根焊接H形截面短柱,并对其进行了轴压试验.分析了试件的破坏过程、屈曲特征、延性以及极限承载力等.试验结果表明:不同宽厚比组配下H形截面钢构件局部屈曲特征差异明显,而局部屈曲特征直接影响了板件的应力发展; 同时构件的延性与宽厚比组配直接相关,呈现两种典型特征; 规范ANSI/AISC360-16对于薄柔H形截面轴压构件的计算结果偏于保守,合理的宽厚比组配下薄柔H形截面钢构件具有较强的屈曲后承载力.
Abstract:
With the popularization and application of light steel structures, the application of slender H-section steel components with good economic benefits and environmental performance in lightweight low-layer steel frame systems has attracted widespread attention. In order to study the axial mechanical properties of slender H-section steel members, the width-thickness ratio was used as the main control parameter to adjust the relative strength of the plates. Six welded H-section stub columns were designed and fabricated with Q355B steel, and axial compression tests were carried out. Based on the test results, the failure process, buckling characteristics, ductility and ultimate bearing capacity of specimens were analyzed. The test results show that the local buckling characteristics of H-section steel members with different width-thickness ratios are significantly different, and the local buckling characteristics directly affect the stress development of the plate. The ductility of the component is directly related to the combination of the width-thickness ratio, showing two characteristics. The calculation results of ANSI/AISC360-16 for slender H-section axial compression members are conservative, and with reasonable width-thickness ratio the slender H-section steel members can have strong post-buckling load-bearing capacity.

参考文献/References:

[1]陈以一, 王伟, 童乐为, 等. 装配式钢结构住宅建筑的技术研发和市场培育[J]. 住宅产业, 2012(12):32-35.
CHEN Yiyi, WANG Wei, TONG Lewei, et al. Technology research and development and market cultivation of prefabricated steel structure residential buildings[J]. Housing Industry, 2012(12):32-35.
[2]周绪红, 王宇航. 我国钢结构住宅产业化发展的现状、问题与对策[J]. 土木工程学报, 2019,52(1):1-7.
ZHOU Xuhong, WANG Yuhang. Status, problems and countermeasures of industrialization development of steel structural residence in China[J]. China Civil Engineering Journal, 2019,52(1):1-7.
[3]HASHAM A S, RASMUSSEN K. Section capacity of thin-walled I-section beam-columns[J]. Journal of Structural Engineering, 1998,124(4):351-359.
[4]HASHAM A S, RASMUSSEN K. Interaction curves for locally buckled I-section beam-columns[J]. Journal of Constructional Steel Research, 1998,58(2):213-241.
[5]SALEM A H, El Aghoury M, El Dib F F, et al. Post local buckling strength of bi-axially loaded slender I-section columns[J]. Thin-walled Structures, 2005,43(7):1003-1019.
[6]陈以一, 周锋, 陈城. 宽肢薄腹H形截面钢柱的滞回性能[J]. 世界地震工程, 2002(4):23-29.
CHEN Yiyi,ZHOU Feng,CHEN Cheng. Research on the hysteretic behaViour of H-shaped steel columns with big width-to-thickness ratio plates.[J]. World Earthquake Engineering, 2002(4):23-29.
[7]陈以一, 马越, 赵静, 等. 薄柔高频焊接H钢柱的实验和抗震承载力评价[J]. 同济大学学报(自然科学版), 2006,34(11):1421-1426.
CHEN Yiyi,MA Yue,ZHAO Jing, et al. Tests on high-frequency welded H steel columns with slendes elements and its evaluation of seismic resistance[J]. Journal of Tongji University(Natural Science), 2006, 34(11): 1421-1426.
[8]赵静. 薄柔截面H形钢构件抗震性能研究[D]. 上海:同济大学, 2004.
ZHAO Jing. Research on seismic performance of thin flexible section H-shaped steel members[D]. Shanghai:Tongji University, 2004.
[9]周江. 焊接H型截面钢构件弹塑性相关屈曲试验与有限元分析[D]. 上海: 同济大学土木工程学院, 2012.
ZHOU Jiang. Elastic-plastic interactive buckling test and finite element analysis of welded H-section steel members[D]. Shanghai:Tongji University, 2012.
[10]CHENG X, CHEN Y, PAN L. Experimental study on steel beam-columns composed of slender H-sections under cyclic bending[J]. Journal of Constructional Steel Research, 2013, 88: 279-288.
[11]陈以一, 何雅雯. 基于广义塑性铰线法的压弯钢构件极限承载力计算[J]. 建筑科学与工程学报, 2016,33(6):14-23.
CHEN Yiyi, HE Yawen. Calculation of ultimate bearing capacity of steel beam-columns based on generalized yield line method[J]. Journal of Architecture and Civil Engineering, 2016,33(6):14-23.
[12]CHENG X, CHEN Y. Ultimate strength of H-sections under combined compression and uniaxial bending considering plate interaction[J]. Journal of Constructional Steel Research, 2018,143(4):196-207.
[13]金阳, 童根树. 考虑翼缘约束的工字形截面腹板的弹性屈曲[J]. 浙江大学学报(工学版), 2009,43(10):1883-1891.
JIN Yang, TONG Genshu. Elastic buckling of web restrained by flanges in I-section members[J]. Journal of Zhejiang University(Engineering Science), 2009,43(10):1883-1891.
[14]YESHEWAWORK Abebe D, CHOI J H. Nonlinear inelastic buckling behavior and residual strength of H-section steel column[J]. Advanced Materials Research, 2013,671-674:927-935.
[15]王彦博, 李国强, 陈素文, 等. Q460钢焊接H形柱轴心受压极限承载力试验研究[J]. 土木工程学报, 2012,45(6):58-64.
WANG Yanbo, LI Guoqiang, CHEN Suwen, et al. Experimental study on the ultimate bearing capacity of axially compressed high strength steel of H-section columns[J]. China Civil Engineering Journal, 2012,45(6):58-64.
[16]施刚, 林错错, 周文静, 等. 960 MPa高强度钢材轴心受压构件局部稳定试验研究[J]. 建筑结构学报, 2014,35(1):126-135.
SHI Gang, LIN Cuocuo, ZHOU Wenjing, et al. Experimental study on local buckling of 960 MPa high strength steel columns under axial compression[J]. Journal of Building Structures, 2014,35(1):126-135.
[17]LEE K, LEE M, OH Y, et al. A comparative study on stub columns with various steel grades subjected to concentric axial loading[J]. International Journal of Steel Structures, 2015,15(1):103-114.
[18]SUN Y, ZHAO O. Material response and local stability of high-chromium stainless steel welded I-sections[J]. Engineering Structures, 2019,178:212-226.
[19]SUN Y, LIANG Y, ZHAO O. Testing, numerical modelling and design of S690 high strength steel welded I-section stub columns[J]. Journal of Constructional Steel Research, 2019,159:521-533.
[20]GÉRARD L, LI L, KETTLER M, et al. Steel I-sections resistance under compression or bending by the overall interaction concept[J]. Journal of constructional steel research, 2021,182:106644.
[21]邓长根, 周江. H型截面钢构件相关屈曲及腹板高厚比限值[C].武汉:中国钢结构协会结构稳定与疲劳分会, 2012.
DENG Changgen, ZHOU Jiang. Analysis of local interactive buckling of H-section members and web height to thickness ratio limit[C]. Wuhan:Institute of Structural Stability and Fatigue, China Steel Construction Society, 2012.
[22]崔凡承, 邓长根, 陈以一. H形截面轴压钢构件弹塑性局部屈曲分析[C]. 合肥: 中国钢结构协会结构稳定与疲劳分会, 2014.
CUI Fancheng, DENG Changgen, CHEN Yiyi. Elasto-plastic local buckling analysis of H-section steel members under axial compression[C]. Hefei: Institute of Structural Stability and Fatigue, China Steel Construction Society, 2014.
[23]戎子涵, 童根树, 李忠学. H形截面轴心压杆的板件宽厚比限值[J]. 低温建筑技术, 2018,40(3):70-76.
RONG Zihan, TONG Genshu, LI Zhongxue. Limiting width-thickness ratios of plate elements in H-section axially compressed members[J]. Low Temperature Architecture Technology, 2018,40(3):70-76.
[24]中华人民共和国住房和城乡建设部, 中华人民共和国质量监督检验检疫总局. 钢结构设计标准:GB50017—2017[S]. 北京: 中国建筑工业出版社, 2017.
Ministry of Housing and Urban-Rural Development of the People's Republic of China, General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Standard for design of steel structures: GB50017-2017[S]. Beijing: China Architecture & Building Press, 2017.
[25]European Committee for Standardization. Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting[S]. Brussels: ECN, 2006.
[26]中华人民共和国国家市场监督管理总局, 中国国家标准化管理委员会. 钢及钢产品力学性能试验取样位置及试样制备:GB/T 2975-2018[S]. 北京:中国标准出版社, 2018.
State Administration for Market Regulation, Standardization Administration of the People's Republic of China. Steel and steel products-Location and preparation of samples and test pieces for mechanical testing:GB/T 2975-2018[S]. Beijing:Standards Press of China, 2018.
[27]中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. 金属材料 拉伸试验 第1部分:室温试验方法:GB/T 228.1-2010[S]. 北京:中国标准出版社, 2010.
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. Metallic materials-Tensile testing-Part 1: Method of test at room temperature: GB/T 228.1-2010[S]. Beijing: Standards Press of China, 2010.
[28]European Committee for Standardization. Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings[S]. Brussels: CEN, 2005.
[29]American Institute of Steel Construction. Specification for Structural Steel Buildings: ANSI/AISC 360-16[S]. Chicago, Illinois: AISC, 2016.

相似文献/References:

[1]成 彤,李宁景,陈光明,等.带纤维编织网增强ECC层钢管混凝土轴压力学性能试验研究[J].西安建筑科技大学学报(自然科学版),2022,54(02):202.[doi:10.15986/j.1006-7930.2022.02.006]
 CHENG Tong,LI Ningjing,CHEN Guangming,et al.Experimental study on axial compressive mechanical properties of concrete-filled steel tube with ECC layer reinforced by textile[J].J. Xi'an Univ. of Arch. & Tech.(Natural Science Edition),2022,54(05):202.[doi:10.15986/j.1006-7930.2022.02.006]
[2]陈光明,赵 程,成 彤,等.持载对FRP-混凝土-钢双壁空心柱轴压承载能力影响[J].西安建筑科技大学学报(自然科学版),2022,54(02):284.[doi:10.15986/j.1006-7930.2022.02.016]
 CHEN Guangming,ZHAO Cheng,CHENG Tong,et al.Effects of sustained load on the axial load-carrying capacity of hybrid FRP-concrete-steel double-skin tubular column[J].J. Xi'an Univ. of Arch. & Tech.(Natural Science Edition),2022,54(05):284.[doi:10.15986/j.1006-7930.2022.02.016]

备注/Memo

备注/Memo:
收稿日期:2021-07-13修改稿日期:2022-08-22
基金项目:国家自然科学基金面上项目(51978437); 山西省基础研究计划优秀青年培育项目(202103021222007)
第一作者:史晓鹏(1998—), 男, 硕士生, 主要从事钢结构的研究.E-mail:shixiaopengax@163.com
通信作者:程 欣(1986—), 女, 博士, 副教授, 主要从事钢结构的研究.E-mail:xchengtyut@126.com.
更新日期/Last Update: 2022-10-28