参考文献/References:
[1] 祖坤,熊二刚,宋良英,等.高强混凝土构件力学性能研究综述[J].硅酸盐通报,2019,38(10):3178-3192.
ZU Kun, XIONG Ergang, SONG Liangying, et al. Review on mechanical properties of high-strength concrete members[J]. Bulletin of the Chinese Ceramic Society, 2019, 38(10):3178-3192.
[2]张国军,白国良,刘伯权.高强混凝土框架柱的研究与进展[J].西安建筑科技大学学报(自然科学版),2002,34(1):53-56.
ZAHNG Guojun, BAI Guoliang, LIU Boquan. Developing status of study on high-strength concrete frame column [J]. J of Xi'an Univ. of Arch. & Tech.(Natural Science Edition), 2002,34(1):5556.
[3]WEST J, IBRAHIM A Hindi.Analytical compressive stress-strain model for high-strength concrete confined with cross-spirals[J].Engineering Structures, 2016, 113: 362-379.
[4]LI Y, CAO S, JING D.Analytical compressive stress-strain model for concrete confined with high-strength multiple-tied-spiral transverse reinforcement[J].The Structural Design of Tall and Special Buildings, 2017:e1416.
[5]MA C K, AWANG A Z, OMAR W. Flexural ductility design of confined high-strength concrete columns: Theoretical modelling [J].Measurement, 2016,78: 42-48.
[6]柯晓军,苏益声,陈宗平,等.钢筋高强混凝土框架柱轴压比限值的确定方法[J].广西大学学报(自然科学版),2016,41(1):114-121.
KE Xiaojun, SU Yisheng, CHEN Zongping,et al. Determination of limit value of axial compression ratio of reinforced high-strength concrete columns [J]. Journal of Guangxi University(Natural Science Edition), 2016,41(1):114-121.
[7]中华人民共和国住房和城乡建设部. 混凝土结构设计规范: GB 50010-2010[S].北京:中国建筑工业出版社,2011.
Ministry of Housing and Urban-Rural Construction of the People's Republic of China. Code for design of concrete structures: GB 50010-2010[S].Beijing: China Architecture &Building Press,2011.
[8]解咏平,贾磊.钢筋混凝土柱极限位移的计算方法及试验研究[J].建筑结构,2014,44(15):66-70.
XIE Yongping, JIA Lei. Calculation method and experimental study on the ultimate displacement of reinforced concrete columns[J].Building Structure2014, 44(15):66-70.
[9]过镇海,时旭东.钢筋混凝土原理和分析[M].北京:清华大学出版社,2003:215-231.
GUO Zhenhai,SHI Xudong.Reinforced concrete theory and analyze[M].Beijing: Tsinghua University Press,2003:215-256.
[10]肖潇.配置高强钢筋的高强混凝土压弯构件的抗震性能研究[M].哈尔滨:哈尔滨工业大学出版社.2017:23-29.
XIAO Xiao. Study on seismic performance of high-strength concrete compression-bending members with high-strength steel bars[M].Harbin: Harbin Institute of Technology Press, 2017:23-29.
[11]SEZEN H,SETZLER E J. Reinforcement slip in reinforced concrete columns[J].ACI Structural Journal,2008,105(5): 280-289.
[12]马颖,张勤,贡金鑫.钢筋混凝土柱弯剪破坏恢复力模型骨架曲线[J].建筑结构学报,2012,33(10):116-125.
MA Ying, ZHANG Qin, GONG Jinxin. Skeleton curves of restoring force model of reinforced concrete columns failed in flexure-shear [J], Journal of Building Structures,2012,33(10):116-125.
[13]杨坤,史庆轩,赵均海.高强箍筋高强混凝土柱的塑性铰长度[J].工程力学,2013,30(2):254-259.
YANG Kun, SHI Qingxuan, ZHAO Junhai. Plastic hinge length of high-strength concrete columns confined by high-strength stirrups[J].Engineering Mechanics, 2013, 30(2):254-259.
[14]肖同亮,邱洪兴.钢-BFRP复合筋混凝土柱试验与骨架曲线模型研究[J].振动、测试与诊断,2018,38(6):1205-1210,1295.
XIAO Tongliang, QIU Hongxing. Seismic performance test and skeleton curve model study concrete columns reinforced by steel-basalt fiber reinforced polymer(BFRP)composite bars[J].Journal of Vibration, Measurement & Diagnosis,2018,38(6):1205-1210,1295.
[15]PARK R, PAULAY T. Reinforced concrete structures[M].New York: John Wiley & Sons,1974:315-319.
相似文献/References:
[1]薛建阳,柯晓军,陈宗平,等.型钢高强混凝土柱保护层厚度确定方法[J].西安建筑科技大学学报(自然科学版),2014,46(01):1.[doi:10.15986/j.1006-7930.2014.01.001]
XUE Jianyang,KE Xiaojun,CHEN Zongping,et al.Determination methods of concrete cover thickness of steel reinforced high-strength concrete columns[J].J. Xi'an Univ. of Arch. & Tech.(Natural Science Edition),2014,46(06):1.[doi:10.15986/j.1006-7930.2014.01.001]
[2]张智吉,张品乐,刘俊雄,等.高强钢筋高强混凝土短肢剪力墙地震损伤性能与损伤模型研究[J].西安建筑科技大学学报(自然科学版),2022,54(01):45.[doi:10.15986/j.1006-7930.2022.01.006
]
ZHANG Zhiji,ZHANG Pinle,LIU Junxiong,et al.Research on seismic damage performance and seismic damage model of high-strength steel bar and high-strength concrete short-limb shear wall[J].J. Xi'an Univ. of Arch. & Tech.(Natural Science Edition),2022,54(06):45.[doi:10.15986/j.1006-7930.2022.01.006
]