[1]易伟建,刘 彪.混凝土板柱节点偏心冲切极限分析[J].西安建筑科技大学学报(自然科学版),2018,50(02):162-0168.[doi:10.15986/j.1006-7930.2018.0.002]
　YI Weijian,L IU Biao.Ultimate strength analysis of punching shear capacity under eccentrically load of concrete slab - column connections[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2018,50(02):162-0168.[doi:10.15986/j.1006-7930.2018.0.002]
点击复制

混凝土板柱节点偏心冲切极限分析()
分享到：

西安建筑科技大学学报（自然科学版）[ISSN:1006-7930/CN:61-1295/TU]

卷:
50
期数:
2018年02期
页码:
162-0168
栏目:
出版日期:
2018-05-28

文章信息/Info

Title:
Ultimate strength analysis of punching shear capacity under eccentrically load of concrete slab - column connections
文章编号:
1006-7930(2018)02-0162-07
作者:
易伟建; 刘 彪
(湖南大学 土木工程学院,湖南 长沙 410082)
Author(s):
YI Weijian ; L IU Biao
(School of Civil Engineering , Hunan University , Changsha 410082, China)
关键词:
偏心冲切; 极限分析; 板柱节点; Mohr-Coulomb准则
Keywords:
eccentrically capacity of punching shear; ultimate strength analysis; slab-column connections; Mohr-Coulomb Criterion
分类号:
TU375
DOI:
10.15986/j.1006-7930.2018.0.002
文献标志码:
A
摘要:
将轴向力和弯矩共同作用下的板柱节点冲切转化为一个偏心作用力效应，基于塑性极限分析的方法，提出平动-旋转复合运动机构模型分析节点的偏心冲切，推演求出了偏载作用下的承载力的泛函表达式；通过构造的破坏曲面近似求出了节点在偏载作用下的抗冲切承载力的最小值，对计算结果进行了简化拟合，并与规范和其他的计算方法进行了比较；试验数据分析表明平动-旋转复合运动机构模型相比与偏心剪应力模型能更好的反应柱子尺寸与板厚的比值对承载力的影响，并基于试验数据对公式进行了部分调整，计算结果与试验结果吻合良好。
Abstract:
The plate under the action of axial force and moment punching problem is transformed into a node eccentric force effect, Based on the plastic limit analysis method, the translational-rotational compound motion mechanism model is proposed to analyze the ultimate bearing capacity of slab - column connections, and the functional is deduced. The proximate bearing capacity under partial load was calcuated with the assumed yield surface,furthermore,the results were appropriately simplified ,also calculation method proposed in this paper and other calculation methods introduced in our existing specification are compared and evaluated ；the comparison of the calculation method shows that the composite motion mechanism model can reflect the influence of the ratio of column to plate thickness on the bearing capacity more accurately than the eccentric shear stress model.the adjusted method proposed in this paper is accurate to the test results well.

参考文献/References:

参考文献References
[1]易伟建 混凝土结构试验与理论研究 [M] 北京: 科学出版社, 2012:286291.
YI Weijian Experimental and theoretical research on concrete structure [M] Beijing: Science Press, 2012:286291.
[2]中华人民共和国建设部混凝土结构设计规范:GB500102010 [S]  北京: 中国建筑工业出版社, 2010.
Ministry of Construction of the PRC Code for Design of Concrete Structure: GB500102010[S], Beijing: China Architecture Industry Press, 2010.
[3]ISLAM S, PARK R Tests on slabcolumn connections with shear and unbalanced flexure [J] Journal of the Structural Division, 1976, 102(3): 549568.
[4]PARK R, ISLAM S Strength of slabcolumn connections with shear and unbalanced flexure [J] Journal of the Structural Division, 1976, 102(1): 549568.
[5]DILGER W H, GHALI A Shear reinforcement for concrete slabs [J] Journal of the Structural Division, 1981, 107(12): 24032420.
[6]马云昌, 吕西林 钢筋混凝土板柱节点的抗震性能研究 [J] 建筑结构学报, 2001, 22(4): 4954.
MA Yunchang, LV Xilin Study on seismic behavior of reinforced concrete slab joints [J] Journal of Building Structures, 2001, 22(4): 4954.
[7]TIAN Y Behavior and modeling of reinforced concrete slabcolumn connections [M] AUSTIN:THE UNIVERSITY OF TEXAS AT AUSTIN, 2007: 146162.
[8]洪小滔 偏载下钢筋混凝土板柱节点冲切破坏试验研究 [D]; 长沙:湖南大学, 2013: 2056.
HONGXiaotao Experimental Study on Punching Shear Failure ofReinforced Concrete SlabColumn Connections with Eccentric Loading [D]; Changsha:Hunan University, 2013: 2056.
[9]CHOI K K, SHIN D W, PARK HG ShearStrength Model for SlabColumn Connections Subjected to Unbalanced Moment [J] ACI Structural Journal, 2014, 111(3): 491152.
[10]BRASTRUP M W, NIELSEN M P, JENSEN B C, et al Axisymmetric punching of plain and reinforced concrete[R] Copenhagen:Structural Research Laboratory, Technical University of Denmark, 1976: 112.
[11]JIANG D H, SHEN J H Strength of concrete slabs in punching shear [J] Journal of Structural Engineering, 1986, 112(12): 25782591.
[12]周朝阳 塑性理论在混合材料复杂结构复合受力极限分析中的应用[C]//第二届全国结构工程学术会议论文集. 北京: 清华大学出版社, 1993, 338343.
ZHOU Zhaoyang Application of plasticity theory to limit analysis of composite structure under complex loading; A collection of papers on the second National Academic Conference on Structural Engineering[C]. Changsha: Tsinghua University press 1993: 338343.
[13]SALIM W, SEBASTIAN W Plasticity model for predicting punching shear strengths of reinforced concrete slabs [J] Structural Journal, 2002, 99(6): 827835.
[14]易伟建, 刘彪 基于塑性理论的钢筋混凝土板冲切开裂滑移模型[J] 西安建筑科技大学学报(自然科学版), 2017, 49(1): 42－47.
YI Weijian , LIU Biao Crack slip model for punching capacity of reinforced concrete slab based on the plastic theory[J] J Xi′an Univ of Arch & Tech(Natural Science Edition), 2017, 49(1): 42－47.

相似文献/References:

[1]吴耀鹏,白国良.平面刚架极限分析的解析法研究[J].西安建筑科技大学学报(自然科学版),2011,43(05):644.[doi:DOI :10.15986/j .1006-7930.2011.05.003]
　WU Y ao-peng,B A I Guo-l iang.Study on the analytical method of plane frame ultimate analysis[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2011,43(02):644.[doi:DOI :10.15986/j .1006-7930.2011.05.003]

备注/Memo

备注/Memo:
收稿日期：:2017-0509修改稿日期:2018-03-27
基金项目：国家自然科学基金(51338004；51178175)
第一作者：易伟建(1954-)，男，博士，教授，博士生导师，主要从事混凝土的基本理论研究.E-mail: wjy@hnu.edu.cn
更新日期/Last Update: 2018-05-28