参考文献/References:
References
[ 1] Kennedy G E , Slammar F .Tur n-up and turn-down in hot rolling[ J] .Iro n and S teel Enginee r Year Boo k , 1958(3):
233-241 .
[ 2] Tanaka E, Tso nokaw a K, Fukada T .Curling and bow ing o f ro lled strips [ J] .T rans.Jpn .Inst .Met ., 1963(4):
124-133 .
[ 3] Johnso n W , Needham G .An ex perimenta l study in asymmetric r olling [ J] .Pr oc .Int .Mech Eng ., 1965, 180
(31):270-275.
[ 4] Po spiech J .A note o n the influence of some facto r s affecting cur vature in the flat ro lling of strip [ J] .J .Mech .
Wo rking Technol , 1987(15):69-80.
[ 5] Ma sui T , Kaseda Y, Ando K .Wa rp contr ol in strip pr ocessing plant [ J] .I ron S teel Inst .Jpn .Int ., 1991 , 31 (3):
[ 6] Jeswie t J, Greene P G .Ex perimenta l mea surement of cur l in r olling [ J] .Journal of Materials Processing Technology
, 1998, 84 (3):202-209.
[ 7] 胡衍生, 程晓茹, 李虎兴, 等.中厚板轧制头部弯曲的试验研究[ J] .武汉科技大学学报, 2003 , 26(1):3-4, 38 .
H U Yan-she ng , CH ENG Xiao-ru , LI H u-x ing , et al .Experimental Research of the Head-Dow n Bending of Plate
[ J] .J .o f Wuha n Uni .of Sci.& Tech ., 2003, 26(1):3-4 , 38 .
[ 8] 刘长瑞, 薛小莲, 王北玲, 等.入口侧辊板非对称接触轧制时的变形效应[ J] .金属成形工艺, 2002 , 20(6):18-20,
29 .
LIU Chang-rui, XUE Xiao-lian, WANG Bei-ling , e t al .The Deforming Effect of Non-symmetr y Contact Ro uing in
Entry Roll [ J] .M ETAL FORMING TECHNOLOGY , 2002 , 20(6):18-20, 29 .
[ 9] 庞玉华, 赵永团, 刘长瑞, 等.板带轧制头部翘曲影响因素的正交实验[ J] .有色金属, 2006 , 59(4):60-62, 72 .
PANG Yu -hua , ZHAO Yong-tuan , LIU Chang-rui , et al .Orthog onal Ex periment o n Influence Fac to rs for Rolling
End Curl of Plate and Sheet[ J] .Nonferro us Me ta ls , 2006, 59(4):60-62, 72 .
[ 10] 李 亮, 杜凤山, 郭振宇, 等.非对称板带热轧头部翘曲的分析与有限元模拟[ J] .冶金设备, 2003, 138(2):4-7,
31.
LI Lia ng , DU Feng-shan , GUO Zhen-yu .Analy tical and FEM Simulatio n of the Fr ont End Bending in Asymmetrical
Ho t Pla te Rolling [ J] .METALLURGICAL EQUIPM ENT , 2003 , 138(2):4-7 , 31 .
[ 11] 李学通, 杜凤山, 王敏婷, 等.板材轧制头部翘曲的非线性有限元研究[ J] .钢铁研究学报, 2005 , 17(5):44-47 .
LI Xue-to ng , DU Feng-shan , WANG Min-ting , e t al .Nonlinea r FEM Study o f Head End Curling in Plate Rolling
[ J] .Jo urnal of I ron and Steel Resear ch , 2005, 17(5):44-47 .
[ 12] 李学通, 杜凤山, 王敏婷, 等.热轧带钢头部翘曲有限元研究[ J] .重型机械, 2004(4):41-44.
LI Xue-to ng , DU Feng-shan, WANG Min-ting , et al .FEM research of strip head cur l on ho t mill [ J] .Heavy
M achinery , 2004(4):41-44 .
[ 13] 江定辉.采用“ 差动咬入法” 控制中厚板轧制板头弯曲[ J] .武汉科技大学学报:自然科学版, 2002 , 25(3):237-
238 .
JIANG Ding-hui .Co ntrol o f Head and Bending in Plate Ro lling by Differential Bite Method [ J] .J.o f Wuhan Uni.
o f Sci .& Tech., 2002, 25(3):237-238.
[ 14] 王玉姝, 徐 海.中厚板卷轧制过程中翘头原因分析和解决办法[ J] .宽厚板, 2006 , 12(5):4-5 , 8 .
WANG Yu-shu, XU H ai.Anallysis of Causes and Solutions o f Ski-up During Medium Plate Coil Rolling [ J] .
WIDE AND H EAVY PLATE, 2006 , 12(5):4-5 , 8 .
[ 15] 姜远军, 李庆江, 王 刚.热轧时铝板带头部产生翘曲原因分析及预防[ J] .轻合金加工技术, 2001, 29(9):18-19,
46.
JING Yuan-jun, LI Qing-jiang , WANG Gang .Prev ention a nd Analy sis of Producing Bending s o n Ends of Aluminum
Pla te during Ho t Ro lling [ J] .Lig ht Allo y Fabricatio n Technology , 2001, 29 (9):18-19 , 46 .
[ 16] 宋耀华, 张 翔, 王继平, 等.预防中厚板轧制头部下扣途径探讨[ J] .武钢技术, 2000, 38(4):24-28 .
SONG Yao-hua , ZH ANG Xiang , WANG Ji-ping , et al.DISCUSSION ON APPROACH TO PREVENTION AGAIN
DOWN BUCKING OF HEAD END OF PLATE [ J] .WISCO TECH NOLOGY, 2000 , 38 (4):24-28 .
[ 17] 闫晓强, 季怀忠, 孙复森, 等.中板轧制过程板坯弯曲生产与抑制之一[ J] .北京科技大学学报, 2000 , 22(5):475-
477 .
YAN Xiao-qiang , JI Huai-zhong , SUN Fu-sen , S UN Jua n, e t al.Fo rming and Curbing of Pla te Bending in Jobbing
Sheet Ro lling Process (1)[ J] .Journal of Univ ersity of Science and Techno lo gy Beijing , 2000, 22(5):475-
477 .
[ 18] 闫晓强, 李玉庆, 孙 娟, 等.中板轧制过程板坯弯曲生产与抑制之二[ J] .北京科技大学学报, 2000 , 22(6):547-
550 .
YAN Xiao-qiang , LI Yu-qing , S UN Jua n, e t al.Fo rming a nd Curbing o f Plate Bending in Jo bbing Sheet Rolling
Pro ce ss(2)[ J] .Jo ur nal of Univ ersity of Science and Technolog y Beijing , 2000, 22(6):547-550.
[ 19] 闫晓强, 李玉庆, 任天宝, 等.中板轧制过程板坯弯曲生产与抑制之三[ J] .北京科技大学学报, 2001, 23(1):75-
77.
YAN Xiao-qiang , LI Yu-qing , REN Tian-bao , et a l.Fo rming a nd Curbing of Plate Bending in Jobbing Sheet Rolling
Pr ocess(3)[ J] .Jo urnal of Univer sity of Science and Techno log y Beijing , 2001, 23(1):75-77 .
[ 20] 闫晓强, 袁晓江, 周 杰.中板轧制过程板坯弯曲生产与抑制之四[ J] .北京科技大学学报, 2001, 23(2):146-148.
YAN Xiao-qiang , YAN Xiao-jiang , ZH OU Jie .Fo rming and Cur bing o f Plate Bending in Jobbing Sheet Rolling
Pro ce ss (4)[ J] .Jo ur nal of Univ ersity of Science and Technolog y Beijing , 2001, 23(2):146-148.
[ 21] 闫晓强, 张扶民, 单为春, 等.中板轧制过程板坯弯曲生产与抑制之五[ J] .北京科技大学学报, 2001 , 23(5):463-
465 .
YAN Xiao-qiang , ZH ANG Fu-min, S HAN Wei-chun , et al.Forming and Cur bing o f Pla te Be nding in Jo bbing
Sheet Ro lling Process (5)[ J] .Journal of Unive rsity o f Science and Technolo gy Beijing , 2001 , 23(5):463-465 .
[ 22] 胡衍生, 程晓茹, 李虎兴, 等.中厚板制头部弯曲机理的探讨[ J] .钢铁, 2003, 39(6):28-31.
H U Yan-sheng , CHENG Xiao-r u, LI H u-x ing , et al .DISCUSSION ON FRONT ENDBENDING DUING
PLATE ROLLING [ J] .IRON AND S TEEL, 2003, 39(6):28-31.
[ 23] 杨 澄.带钢翘头(扣头)原因分析和改进[ C] ∥2008 年全国轧钢生产技术会议文集, 大连:232-236.
YANG Cheng .ANALYSIS OF THE REASONS FOR HEAD WARPING AND BENDING AND TH E IMPROVING
[ C] ∥The pro ceedings of 2008 natio nw ide ro lling techno lo gy meeting , Dalian:232-236.
[ 24] 曾庆亮, 赵济秀, 马建忠, 等.雪橇轧制和负荷平衡特性在中板轧机上的实现[ J] .轧钢, 2001 , 18(4):53-54 .
ZENG Qing-liang , ZHAO Ji-xiu, MA Jian-zhong , et al .Realization of the sledge rolling and the load balance in
the pla te mill [ J] .STEEL ROLLING , 2001, 18(4):53-54.
[ 25] 张清东, 孙 林, 陈先霖, 等.2800 四辊轧机板形控制功能完善及雪橇板控制参数优化[ J] .冶金设备, 2005 , 149
(1):10-13.
ZHANG Qing-do ng , SUN lin, CH EN Xian-lin, et al .Optimiza tion and Improv eme nt of Co ntr ol Pe rformance o f
Pla te Shape and Curling on a 2800mm 4- hig h Revering Pla te Mill [ J] .META LLURGICAL EQUIPM ENT .
2005, 149 (1):10-13 .