[1]王先铁,周清汉,白连平,等.不同屈服点薄钢板剪力墙的受力性能研究.[J].西安建筑科技大学学报:自然科学版,2014,46(04):492-496.[doi:10.15986/j.1006-7930.2014.04.006]
 WANG XiantieZHOU QinghanBAI LianpingMA YousufuZHOU ChaoYANG Hangdong.Mechanical behavior study of different yield point thin steel plate shear walls[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2014,46(04):492-496.[doi:10.15986/j.1006-7930.2014.04.006]
点击复制

不同屈服点薄钢板剪力墙的受力性能研究.()
分享到:

西安建筑科技大学学报:自然科学版[ISSN:1006-7930/CN:61-1295/TU]

卷:
46
期数:
2014年04期
页码:
492-496
栏目:
出版日期:
2014-08-31

文章信息/Info

Title:
Mechanical behavior study of different yield point thin steel plate shear walls
文章编号:
1006-7930(2014)04-0492-05
作者:
王先铁1周清汉1白连平2马尤苏夫1周超 1 杨航东1
(1. 西安建筑科技大学土木工程学院,陕西 西安 710055;2. 中国建筑科学研究院西北分院,陕西 西安 710061)
Author(s):
WANG Xiantie1ZHOU Qinghan1BAI Lianping2MA Yousufu1ZHOU Chao1YANG Hangdong1
(1. School of Civil Engineering, Xi’an Univ. of Arch. & Tech., Xi’an 710055,China; 2. Northwest Branch, Institution of Chinese Architecture Science, Xi’an 710061, China)
关键词:
薄钢板剪力墙不同屈服点剪力分配力学性能
Keywords:
thin steel plate shear walls different yield point distribution of shear mechanical behavior
分类号:
TU398.2
DOI:
10.15986/j.1006-7930.2014.04.006
文献标志码:
A
摘要:
采用有限元软件ABAQUS 6.10 对薄钢板剪力墙屈服点为235 N/mm2 和345 N/mm2 的钢框架-薄钢板剪力墙进行了非线性数值分析,对二者的承载力、刚度、剪力分配、滞回性能及延性等进行了研究.结果表明:薄钢板剪力墙屈服点对初始承载力、刚度和剪力分配影响很小;当薄钢板剪力墙屈服后,其屈服点越高,承载力和刚度亦越大,钢板剪力墙承担的剪力越多;高屈服点薄钢板剪力墙会增加受压柱的负担,使其屈曲位置上移,降低对薄钢板剪力墙的有效锚固;加载初始阶段, 低屈服点薄钢板剪力墙先于高屈服点薄钢板剪力墙屈服耗能;达到理想破坏的钢框架-薄钢板剪力墙具有很好的延性.
Abstract:
Nonlinear numerical analysis is conducted on the steel frame-thin steel plate shear walls with 235 N/mm2 or 345 N/mm2 yield point by using the finite element software ABAQUS 6.10. The load carrying capacity, stiffness, shears distribution, hysteretic behavior and ductility are investigated. Results obtained from this study are as follows: The yield point of thin steel plate shear walls has no influence on the initial load carrying capacity, stiffness and shears distribution. After the thin steel plate shear walls yield, the higher the yield point, the higher the bearing capacity; and the larger the stiffness, the more the distributed shear. Higher yield point thin steel plate shear wall will increase the tension action of compressed column, which will move up the column’s buckling and reduce the effective anchorage of steel plate shear walls. At initial loading stage, lower yield point steel plate shear walls yield earlier than higher yield strength steel. The thin steel plate shear walls with idealized failure mechanism have excellent ductility.

参考文献/References:

[1] 郭彦林, 董全利. 钢板剪力墙的发展与研究现状[J]. 钢结构, 2005, 20(1):1-6.

GUO Yanlin, DONG Quanli. Research and application of steel plate shear wall in high-rise buildings[J]. Steel Construction, 2005, 20(1):1-6.

[2] THORBURN L J , KULAK G L , MONTGOMERY C J. Analysis of steel plate shear walls[R]. Structural Engineering Report No. 107, Department of Civil Engineering, university of Alberta, Edmonton, Alberta, Canada, 1983.

[3] PARK H G, KWACK J H, JEON S W. Framed steel plate wall behavior under cyclic lateral loading[J]. Journal of Structural Engineering, 2007, 133(3):378-388.

[4] 陈国栋, 郭彦林, 范珍, 等. 钢板剪力墙低周反复荷载实验研究[J]. 建筑结构学报, 2004, 25(2):19-26.

CHEN Guodong, GUO Yanlin, FAN Zhen, et al. Cyclic test of steel plate shear walls[J]. Journal of Building Structures, 2004, 25(2):19-26.

[5] 王迎春, 郝际平, 曹春华, 等. 栓焊混合连接钢板剪力墙试验研究[J]. 建筑钢结构进展, 2009, 11(1):16-20.

WANG Yingchun, HAO Jiping, CAO Chunhua, et al. Experimental studies on steel plate shear walls with welded-bolted connection[J]. Progress in Steel Building Structures, 2009, 11(1):16-20.

[6] 郝际平, 曹春华, 李峰, 等. 开洞薄钢板剪力墙低周反复荷载试验研究[J]. 地震工程与工程振动, 2009, 29(2):79-85.

HAO Jiping, CAO Chunhua, LI Feng, et al. Cyclic test of thin steel plate shear wall with openings[J]. Journal of earthquake Engineering and Engineering Vibration, 2009, 29(2):79-85.

[7] 曹春华, 郝际平, 王迎春, 等. 开缝薄钢板剪力墙低周反复荷载试验研究[J]. 西安建筑科技大学学报:自然科学版, 2008, 40(1):46-52.

CAO Chunhua, HAO Jiping, LI Feng, WANG Yingchun, et al. Cyclic test of thin steel plate shear wall with slits[J]. J. Xi’an Univ. of Arch. & Tech.: Natural Science Edition, 2008, 40(1):46-52.

[8] 聂建国, 樊建生, 黄远. 钢板剪力墙的试验研究[J]. 建筑结构学报, 2010, 31(9):1-8.

NIE Jianguo, FAN Jiansheng, HUANG Yuan. Experimental research on steel plate shear wall[J]. Journal of Building Structure, 2010, 31(9):1-8.

[9] Dassault Systems Simulia Corp. ABAQUS analysis user’s manual version 6.10[M]. PROVIDENCE, RI: DASSAULT SYSTÈMES SIMULIA CORP, 2010.

[10] 李峰, 李慎, 郭宏超, 等. 钢板剪力墙抗震性能的试验研究[J]. 西安建筑科技大学学报:自然科学版, 2011, 43(5):623-630.

LI Feng, LI Shen, GUO Hongchao, et al. Experimental investigation of seismic performance of steel plate shear walls[J]. J. Xi’an Univ. of Arch. & Tech.: Natural Science Edition, 2011, 43(5):623-630.

[11] 陈国栋, 郭彦林. 十字加劲钢板剪力墙的抗剪极限承载力 [J]. 建筑结构学报, 2004, 25(1):71-78.

CHEN Guodong, GUO Yanlin. Ultimate shear carrying capacity of steel plate shear wall with cross stiffeners[J]. Journal of Building Structure, 2004, 25(1):71-78.

[12] VIAN D, BRUNEAU M. Steel plate shear walls for seismic design and retrofit of building structure[R]. Buffalo, N. Y.: Technical Rep. No. MCEER-05-0010, Multidisciplinary Center for Earthquake Engineering Research, 2012.

[13] TSAI KEH-CHYUAN, LI CHAO-HSIEN. Cyclic tests of four two-story narrow steel plate shear walls—PartⅠ : studies and specimen design[J]. Earthquake Engineering and Structural Dynamics, 2010, 39(7):775-799.

[14] BERMAN J W, BRUNEAU M. Plastic analysis and design of steel plate shear walls[J]. Journal of Structural Engineering, 2003,129(11):1448-1456.

相似文献/References:

[1]王先铁,王东石,李海广,等.方钢管混凝土框架-单侧开洞薄钢板剪力墙滞回性能研究[J].西安建筑科技大学学报:自然科学版,2015,47(03):333.[doi:10.15986/j.1006-7930.2015.03.005]
 WANG Xiantie,WANG Dongshi,LI Haiguang,et al.Research on the hysteretic behavior of concrete-filled square steel tubular frame-thin steel plate shear walls with side opening[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2015,47(04):333.[doi:10.15986/j.1006-7930.2015.03.005]
[2]王先铁,杨航东,王连坤,等.方钢管混凝土框架-两边连接薄钢板剪力墙 力学性能研究[J].西安建筑科技大学学报:自然科学版,2014,46(05):665.[doi:10.15986/j.1006-7930.2004.05.008]
 WANG Xiantie,YANG Hangdong,WANG Liankun,et al.Mechanical behavior study of concrete-filled square steel tubular frame-thin steel plate shear walls with two-side connections[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2014,46(04):665.[doi:10.15986/j.1006-7930.2004.05.008]
[3]王先铁,刘立达,高娅静,等.方钢管混凝土框架-斜加劲薄钢板剪力墙的抗震性能试验研究[J].西安建筑科技大学学报:自然科学版,2015,47(04):503.[doi:10.15986/j.1006-7930.2015.04.008]
 WANG Xiantie,LIU Lida,GAO Yajing,et al.Study on the seismic behavior of concrete-filled square steel tubular frame-thin steel plate shear walls with diagonal stiffeners[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2015,47(04):503.[doi:10.15986/j.1006-7930.2015.04.008]
[4]王先铁,储召文,杨航东,等.方钢管混凝土框架-两侧开洞薄钢板剪力墙的力学性能研究[J].西安建筑科技大学学报:自然科学版,2015,47(05):635.[doi:DOI: 10.15986/j.1006-7930.2015.05.005]
 WANG Xiantie,CHU Zhaowen,YANG Hangdong,et al.Study on the mechanical behavior of concrete-filled square steel tubularframe-thin steel plate shear walls with bilateral openings[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2015,47(04):635.[doi:DOI: 10.15986/j.1006-7930.2015.05.005]
[5]王先铁,周绪红,宋文俊,等.方钢管混凝土框架-斜十字加劲薄钢板剪力墙低周反复荷载试验研究[J].西安建筑科技大学学报:自然科学版,2016,48(01):63.[doi:10.15986/j.1006-7930.2016.01.011]
 WANG Xiantie,ZHOU Xuhong,SONG Wenjun,et al.Cyclic loading test study on concrete-filled square steel tubular frame-diagonally cross stiffened thin steel plate shear walls[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2016,48(04):63.[doi:10.15986/j.1006-7930.2016.01.011]
[6]王先铁,周绪红,储召文,等.方钢管混凝土框架内置侧边开洞薄钢板剪力墙的抗侧承载力研究[J].西安建筑科技大学学报:自然科学版,2017,49(03):350.[doi:10.15986/j.1006-7930.2017.03.007]
 WANG Xiantie,ZHOU Xuhong,CHU Zhaowen,et al.Study on lateral resistance capacity of concrete-filled square steel tubular frame-thin steel plate shear wall with side opening[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2017,49(04):350.[doi:10.15986/j.1006-7930.2017.03.007]
[7]王先铁,李 进,贾贵强,等.方钢管混凝土框架-竖向加劲薄钢板剪力墙的滞回性能研究[J].西安建筑科技大学学报:自然科学版,2017,49(05):637.[doi:10.15986/j.1006-7930.2017.05.004]
 WANG XiantieLI JinJIA GuiqiangCHEN FengmeiLUO YaoZHENG Jiang.Hysteretic behavior study of concrete-filled square steel tubular frame-thin steel plate shear wall with vertical stiffeners[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2017,49(04):637.[doi:10.15986/j.1006-7930.2017.05.004]

备注/Memo

备注/Memo:
基金项目:国家自然科学基金项目(51108369);陕西省青年科技新星项目(2013KJXX-54);住房与城乡建设部科学技术项目(2014-K2-007)
收稿日期:2013-11-29 修改稿日期:2014-07-25
作者简介:王先铁(1979-),男,博士,教授,主要研究方向为钢结构与钢管混凝土结构.E-mail: wangxiantie@163.com
更新日期/Last Update: 2015-10-06