[1]任 宇,陈仁朋,陈云敏.在ABAQUS中开发实现Mortara界面循环本构模型[J].西安建筑科技大学学报:自然版,2015,47(06):843-847.[doi:10.15986/j.1006-7930.2015. 06.015]
 REN Yu,CHEN Renpeng,CHEN Yunmin.Implementation of Mortara cyclic interface model into ABAQUS[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2015,47(06):843-847.[doi:10.15986/j.1006-7930.2015. 06.015]
点击复制

在ABAQUS中开发实现Mortara界面循环本构模型()
分享到:

西安建筑科技大学学报:自然版[ISSN:1006-7930/CN:61-1295/TU]

卷:
47
期数:
2015年06期
页码:
843-847
栏目:
出版日期:
2016-01-15

文章信息/Info

Title:
Implementation of Mortara cyclic interface model into ABAQUS
文章编号:
1006-7930(2015)06-0843-05
作者:
任 宇1陈仁朋2陈云敏2
(1.中国电力工程顾问集团华东电力设计院,上海 200063; 2. 浙江大学建筑工程学院,浙江 杭州 310058)
Author(s):
REN Yu1 CHEN Renpeng 2 CHEN Yunmin2
(1.East China Electric Power Design Institute of China, Power Engineering Consulting Group, Shanghai 200063, China; 2. College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China)
关键词:
Mortara 界面循环模型ABAQUS用户界面子程序界面循环剪切试验
Keywords:
Mortara cyclic interface model ABAQUS UINTER cyclic interface shear test
分类号:
TU473
DOI:
10.15986/j.1006-7930.2015. 06.015
文献标志码:
A
摘要:
利用通用有限元程序ABAQUS 提供的UINTER 用户界面子程序接口,针对Mortara 界面循环弹塑性模型开发了子程序.编写了适合于该本构模型的显示积分算法,根据ABAQUS 用户界面子程序的接口规范,设计了子程序的计算流程及程序结构.使用子程序对界面循环剪切试验进行了数值模拟,并将结果与文献中的结果进行了比较.结果表明:本文所开发的子程序具有良好的计算稳定性及精度,能够反映出循环剪切作用下的界面加载性状,得到了更合理的数值分析结果.该子程序的成功开发将极大扩展该界面本构模型在岩土研究及设计中的应用.
Abstract:
An elastic-plastic constitutive model for cyclic interface behavior is implemented using the UINTER in the commercial finite element software ABAQUS. The formulation of the constitutive model, the implementation procedure and the algorithm for the mode are presented in detail. Computational examples are investigated to verify the implementation. The numerical solution using UINTER agree well with numerical solution published by others. The UINTER is shown to have an excellent calculation stability and accuracy. It is proved that the UINTER is capable of reproducing key features of the cyclic interface behavior. The successful implementation of this Mortara cyclic interface model in ABAQUS will greatly enlarge its application in geotechnical research and design

参考文献/References:

References

[1] MORTARA G, MANGIOLA A, GHIONNA V N. Cyclic shear stress degradation and post-cyclic behavior from sand -steel interface direct shear tests[J]. Canadian Geotechnical Engineeing Journal, 2007, 44(7): 739-752.

[2] ABAQUS user’s and theory manuals[M]. Rhode Island, Hibbitt: Karlsson & Sorensen Inc., 2004.

[3] FAKHARIAN K, EVGIN E. Cyclic simple-shear behaviour of sand-steel interfaces under constant normal stiffness condition[J]. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 1997, 123(12): 1096-1105.

[4] GHIONNA V N, MORTARA G. An elastoplastic model for sand-structure interface behavior[J]. Géotechnique, 2002, 52(1): 41-50.

[5] VERMEER P A. A double hardening model for sand[J]. Géotechnique, 1978, 28(4): 413-433.

[6] MORTARA G, BOULON M, GHIONNA V N. A 2-D constitutive model for cyclic interface behavior[J]. International Journal for Numerical Analytical Methods in Geomechanics, 2002, 26(11): 1071-1096.

[7] DAFALIAS Y F, POPOV E P. Plastic internal variables formalism of cyclic plasticity[J]. ASME, Journal of Applied Mechanics, 1976, 43(4): 645-651.

[8] POTTS D M, GENS A. A critical assessment of methods of correcting for drift from yield surface in elasto-plastic finite element analysis[J]. International Journal for Numerical and Analytical Method in Geomechanics, 1985, 9: 149-159.

[9] POTTS D M, GANENDRA D. An evaluation of substepping and implicit stress point algorithms[J]. Computer Method In Applied Mechanics Engineering, 1994, 119(3/4): 341-354.

[10] 任宇. 长期竖向循环荷载作用下桩的累积变形特性试验及理论研究[D]. 杭州: 浙江大学, 2013.

REN Yu. Model test and theoretical study on the long-term deformation of single pile to cyclic axial loading [D]. Hangzhou: Zhejiang University, 2013.

相似文献/References:

[1]薛建阳,李海博,翟 磊,等.反复荷载下内配PVC管约束高强混凝土柱受力性能及其影响因素分析[J].西安建筑科技大学学报:自然版,2016,48(01):24.[doi:10.15986/j.1006-7930.2016.01.004]
 XUE Jianyang,LI Haibo,ZHAI Lei,et al.Analysis on influence parameters and mechanical behaviors of embedded PVC pipe confined with reinforced high-strength concrete columns under cyclic reversed loading[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2016,48(06):24.[doi:10.15986/j.1006-7930.2016.01.004]
[2]门进杰,李欢,周婷婷,等.基于ABAQUS的RCS空间组合节点有限元分析[J].西安建筑科技大学学报:自然版,2017,49(03):360.[doi:10.15986/j.1006-7930.2017.03.008]
 MEN Jinjie,LI Huan,ZHOU Tingting,et al.Finite element analysis of three-dimensional composite RCS moment joints based on ABAQUS[J].J.Xi’an Univ. of Arch. & Tech.:Natural Science Edition,2017,49(06):360.[doi:10.15986/j.1006-7930.2017.03.008]

备注/Memo

备注/Memo:
收稿日期:2015-06-16 修改稿日期:2015-12-04
基金项目:国家杰出青年科学基金项目(51225804);华东电力设计院有限公司科标信项目(基于ANSYS 的地震反应分析方法的研究)
作者简介:任宇(1984-),男,工学博士,工程师,主要从事岩土工程方向的科研与技术开发.E-mail:renyu2812@ecepdi.com
更新日期/Last Update: 2016-01-29