参考文献/References:
[1]PATEL Romil, PATEL Chintan, PATEL Pratik. A review paper on measure thermal conductivity[J]. JETIR, 2016, 2(3): 51-53.
[2]INGEN Hausz. On metals as conductors of heat[J].J. de Physique, 1789, 34(68), 380-387.
[3]FORBES J D. On the progress of Experiments on the Conduction of Heat, undertaken at the Meeting of the British Association at Edinburgh, in 1850 [J]. Brit. Assoc. Adv. Sci. ,1851, 21:7-8.
[4]FORBES J D. On Experiments on the Laws of the Conduction of Heat[J]. Brit. Assoc. Adv. Sci., 1852, 22: 260-261.
[5]FORBES J D. Experimental Inquiry into the Laws of the Conduction of Heat in Bars, and into the Conducting Power of Wrought Iron[J]. Trans. Roy. Soc. Edinburgh, 1864, 23: 133-146.
[6]FORBES J D. Experimental Inquiry into the Laws of the Conduction of Heat in Bars. Part II. On the Conductivity of Wrought Iron, Deduced from the Experiments of 1851[J]. Trans. Roy. Soc. Edinburgh, 1865, 24:73-110.
[7]PEIRCE B O, WILLSON R W. On the thermal conductivities of certain poor conductors:I[J]. Proc. Am. Acad. Arts and Sci, 1898, 34(1): 1-56.
[8]杜洛金, 奚同庚,等.固体热物理性质导论:理论和测量[M].北京:中国计量出版社,1987.
DU Luojin,XI Tonggeng, et al. Introduction to solid thermophysical properties: theory and measurement [M].Beijing: China Metrology Publishing House, 1987.
[9]TOULOUKIAN Y S, POWELL R W, HO C Y, et al. Thermophysical Properties of Matter-The TPRC Data Series. Volume 10. Thermal Diffusivity[R]. Fort Belvoir:TEP/AC, 1974.
[10]HAHN M, ROBINSON H, FLYNN D. Robinson line-heat-source guarded hot plate apparatus[C]. Symposium by ASTM Committee C-16 on Thermal and Cryogenic Insulating Materials, Philadelphia:ASTM International, 1973:167-192.
[11]TROUSSART L R, Analysis of errors in guarded hot plate measurements as compilated by the finite element methods[C]. Symposium by ASTM Committee C-16 on Thermal Insulation, Quebec:ASTM International, 1982:7-28.
[12]HAGER N E. Recent developments with the thin-heater thermal conductivity apparatus[J]. Journal of Building Physics, 1985, 9(2): 111-122.
[13]KELTNER N, BAINBRIDGE B, BECK J. Rectangular heat source on a semi-infinite solid: an analysis for a thin film heat flux gage calibration[J]. Journal of Heat Transfer, 1988, 110: 42-48.
[14]BAINBRIDGE B. A Green′s function solution for a rectangular heat source on an infinite plate[J]. National Heat Transfer Conference, 1989, 112: 23-30.
[15]HEALY W. Using finite element analysis to design a new guarded hot plate apparatus for measuring the thermal conductivity of insulating materials[J]. National Institute Standards Technology, 2001, 1:1-9.
[16]XAMáN J, LIRE L, ARCE J. Analysis of the temperature distribution in a guarded hot plate apparatus for measuring thermal conductivity[J]. Applied Thermal Engineering, 2009, 29(4): 617-623.
[17]SANJAYA C S, WEE T H, TAMILSELVAN T. Regression analysis estimation of thermal conductivity using guarded-hot-plate apparatus[J]. Applied Thermal Engineering, 2011, 31(10): 1566-1575.
[18]BUCK W, RUDTSCH S. Handbook of materials measurement methods[J]. Springer Berlin Heidelberg, 2006, 40(9): 399-429.
[19]SALMON D. Thermal conductivity of insulations using guarded hot plates, including recent developments and sources of reference materials[J]. Measurement Science and Technology, 2001, 12(12): 89.
[20]中华人民共和国住房和城乡建设部. 绝热材料稳态热阻及有关特性的测定 防护热板法: GB/T 10294-2008 [S].北京:中国标准出版社, 2008.
Ministry of Housing and Urban-Rural Development of the People′s Republic of China. Thermal insulation—Determination of steady-state thermal resistance and related properties: guarded hot plate apparatus: GB/T 10294-2008 [S]. Beijing: China Standards Press, 2008.
[21]ISO. Thermal insulation; determination of steady-state thermal resistance and related properties; guarded hot plate apparatus: ISO 8302-1991[S]. Geneva, Switzerland: International Organization for Standardization, 1991.
[22]ASTM. Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus: ASTM C177[S]. Philadelphia:ASTM, 2013.
[23]BSI. Thermal performance of building materials and products- determination of thermal resistance by means of guarded hot plate and heat flow meter methods-products of high and medium thermal resistance: BS EN 12667[S]. London: BSI British Standards ,2001.
[24]BSI. Thermal performance of building materials and products determination of thermal resistance by means of guarded hot plate and heat flow meter methods dry and moist products of medium and low thermal resistance: BS EN 12664[S]. London: BSI British Standards, 2001.
[25]BSI. Thermal performance of building materials and products-Determination of thermal resistance by means of guarded hot plate and heat flow meter methods-Thick products of high and medium thermal resistance: BS EN 12664[S]. London: BSI British Standards, 2001.
[26]BSI. Thermal insulation products for building equipment and industrial installations-Determination of thermal resistance by means of the guarded hot plate method Part 1: Measurements at elevated temperatures from 100 ℃ to 850 ℃: CEN/TS 15548-1-2014[S]. London: British Standards Institution, 2014.
[27]BSI. Thermal performance of building materials-The use of interpolating equations in relation to thermal measurement on thick specimens-Guarded hot plate and heat flow meter apparatus: CEN/TR 15131-2006[S]. London: British Standards Institution, 2006.
[28]中华人民共和国住房和城乡建设部. 标准样品工作导则: GB/T 15000 [S].北京:中国标准出版社, 2012.
Ministry of Housing and Urban-Rural Development of the People′s Republic of China. Directives for the work of reference materials: GB/T 15000 [S]. Beijing: China Standards Press, 2012.
相似文献/References:
[1]谢静超,邵 腾,李 悦,等.相变构件导热系数测定方法的研究[J].西安建筑科技大学学报(自然科学版),2013,45(02):192.[doi:10.15986/j.1006-7930.2013.02.007]
XIE Jing-chao,SHAO Teng,LI Yue,et al.Research on thermal conductivity measurement of PCM component[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2013,45(01):192.[doi:10.15986/j.1006-7930.2013.02.007]
[2]张倩,李彦伟,谢来斌.沥青混合料导热系数测试及其影响因素分析[J].西安建筑科技大学学报(自然科学版),2014,46(02):199.[doi:10.15986/j.1006-7930.2004.02.009]
ZHANG Qian,LI Yanwei,XIE Laibin.Analysis of testing method and influcing factors ofasphalt mixture thermal conductivity coefficient[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2014,46(01):199.[doi:10.15986/j.1006-7930.2004.02.009]
[3]王莹莹,姜 超,刘艳峰,等.含湿建筑材料导热系数研究进展[J].西安建筑科技大学学报(自然科学版),2017,49(02):271.[doi:10.15986/j.1003-7930.2017.02.018]
WANG Yingying,JIANG Chao,LIU Yanfeng,et al.Research progress on thermal conductivity of moist building materials[J].J. Xi’an Univ. of Arch. & Tech.(Natural Science Edition),2017,49(01):271.[doi:10.15986/j.1003-7930.2017.02.018]