参考文献/References:
[1] 罗晓兰,陈建义,杜美华,等.入口含尘浓度对旋风分离器效率影响规律的研究[J].石油化工设备技术,1999,20(2):8-10 LUO Xiao-lan, CHEN Jian-yi, DU Mei-hua, et al. Research for the influence law of entrance dust bearing concentration on the cyclone efficiency[J]. Petro-Chemical Equipment Technology, 1999,20(2):8-10
[2] FASSANI F L , LEONARDO G J. A study of the effect of high inlet solids loading on a cyclone separator pressure drop and collection efficiency[J].Powder Technology, 2000,107:60-65
[3] 薛勇.流体固气比对预热器旋风筒性能的影响[J].水泥,1991,(9):10-15
XUE Yong. Influences of the Solid-Gas Ratio of Fluid to the Performances of Preheater Cyclones[J]. Cement, 1991,(9):10-15
[4] 黄文熙,薛勇,蒋友新.非结构因素对旋风预热器主要性能参数的影响[J].水泥,1992,(3):1-6
HUANG Wen-xi, XUE Yong, JIANG You-xin. Influences of non-structural factors to the main operation parameters of cyclone preheaters[J]. Cement, 1992,(3):1-6
[5] 李文琦,陈建义.旋风分离器高温性能试验研究[J].中国石油大学学报:自然科学版, 2006, 30(3):91-105
LI Wen-qi, CHEN Jian-yi. Experimental research of cyclone performance at high temperature [J]. Journal of China University of Petroleum(Edition of Natural Science), 2006,30(3):91-105
[6] 许世森,许晋源,许传凯.温度和压力对旋风分离器高温除尘性能影响的研究[J].动力工程,1997,17(2):52-58
XU Shi-sun, XU Jin-yuan, XU Chuankai. Study of the Influence of Temperature and Pressure on High Temperature Dust Separation Properties of Cyclone Separators[J]. Power engineering, 1997, 17(2):52-58
[7] 陆雷,吴国芳,孙利民等.高温高效低阻旋风筒的热态模型试验[J].硅酸盐学报, 2006, 34(8):1022-1025
LU Lei, WU Guo-fang, SUN Li-min. Hot model test of high temperature, high efficiency and low resistance cyclone separators[J]. Journal of the Chinese Ceramic Society, 2006, 34(8):1022-1025
[8] 钱付平,章名耀.温度对旋风分离器分离性能影响的数值研究[J].动力工程, 2006, 26(2):253-257
QIAN Fu-ping, ZHANG Min-yao. Numerical study of the influence of temperature on separation performance of cyclone separators[J]. Power engineering, 2006, 26(2):253-257
[9] 舒帆.旋风除尘器除尘效率的影响因素分析[J].水泥技术,2009(2):89-91
SHU Fan. Factors influencing dust removal efficiency of cyclone filter[J]. Cement Technology, 2009(2):89-91
[10] 许世森.细微尘粒的预团聚对旋风分离器高温除尘性能影响的实验研究[J].动力工程,1999,19(4):309-313
XU Shi-sun. Experimental research on the performance of cyclone at high temperature improved by agglomerating micro particles[J]. Power engineering[J]. 1999,19(4):309-313
[11] DERKSEN J J, SUNDARESAN S, VANDENAKKER H E A. Simulation of mass loading effects in gas-solid cyclone separators[J]. Powder Technology, 2006, 163:59-68
[12] 嵇鹰, 徐德龙. 旋风预热器粗糙内壁对其性能的影响试验[J].西安建筑科技大学学报:自然科学版, 2009, 41(5):730-734
JI Ying, XU De-long. Test of the effect of the wall roughness on the performance of a cyclone preheater[J]. Xi’an Univ. of Arch. & Tech. (Natural Science Edition), 2009, 41(5):730-734
[13] 杨沛浩.高温高固气比条件下旋风预热器性能的研究[D].西安:西安建筑科技大学,2010
YANG Pei-hao. An investigation into cyclone preheater performance in condition of high temperature and high solid-gas mass ratio[D]. Xi’an:XAUAT, 2010
[14] Welty J R, Wicks C E, Wilson R E. Fundamentals of momentum, heat, and mass transfer[M]. Singapore: John Wiley and sons, 4th Edition, 2001
Ｊｏｈｎ Ｗｉｌｅｙ ａｎｄ Ｓｏｎｓ，４ｔｈ Ｅｄｉｔｉｏｎ，２００１．